Shift fork for Honda Accord UC, 7 generation 10.2002 - 02.2008
-
Steering wheelLeft
-
Body style
-
Grade2.4 EXECUTIVE, 2.4 TYPE S
-
DriveFF
-
Transmission
-
EngineK24A3
-
Volume2.40
-
FrameCL9, CM2
-
Produсtion years
Scheme fits to:
Steering wheel
Left
Body style
Wagon
Grade
2.4 EXECUTIVE
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
K24A3
Volume
2.40
Frame
CM2
Produсtion years
2003
2004
2005
2006
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 24111-PRP-000 | Fork, reverse shift | 26.87 | 1 | |
| 24282-634-000 | Bolt, shaft fork setting | 1.00 | 1 | |
| 24410-PPV-000 | Shaft comp., control | 31.17 | 1 | |
| 24412-RAA-000 | Lever comp., control | 8.02 | 1 | |
| 24414-PST-010 | Pin, control wire | 3.77 | 1 | |
| 24634-PRP-060 | Spring, detent lever | 1.36 | 1 | |
| 25420-RCT-004 | Strainer assy., atf | 39.83 | 1 | |
| 25421-RCL-000 | Plate, baffle | 3.64 | 1 | |
| 90001-PA9-000 | Bolt, hex., 6mm | 1.12 | 1 | |
| 90433-P0G-000 | Washer, lock, 6mm | 1.00 | 1 | |
| 90433-639-000 | Washer, lock, 6mm | 1.00 | 1 | |
| 90706-PST-000 | Pin, snap 9mm | 1.93 | 1 | |
|
91209-612-003
|
Oil seal, 12x22x7 | 2.72 | 1 | |
| 91301-RCT-004 | O-ring 21.8x1.9 | 1.38 | 1 | |
| 94305-40162 | Pin, spring 4x16 | 1.00 | 1 | |
|
95701-060-5508
|
Bolt, flange 6x55 | 1.00 | 1 | |
| 95701-060-7008 | Bolt, flange 6x70 | 1.00 | 1 | |
| 95701-061-0508 | Bolt, flange 6x105 | 1.00 | 1 | |
| 95701-061-1508 | Bolt, flange 6x115 | 1.00 | 1 |
Scheme fits to:
Steering wheel
Left
Body style
Wagon
Grade
2.4 EXECUTIVE
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
K24A3
Volume
2.40
Frame
CM2
Produсtion years
2003
2004
2005
2006
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 24201-RAS-000 | Fork comp., gearshift (5-6) | 45.33 | 1 | |
| 24210-RAS-000 | Fork comp., gearshift (3-4) | 39.27 | 1 | |
| 24220-RAP-000 | Fork comp., gearshift (1-2) | 44.78 | 1 | |
| 24230-PPP-000 | Holder comp., reverse shift | 17.41 | 1 | |
| 24240-PNS-000 | Piece comp., reverse shift | 32.96 | 1 | |
| 24455-PHR-000 | Spring, ball setting | 1.00 | 3 | |
| 24519-PB6-000 | Screw, ball spring setting | 1.99 | 3 | |
| 90028-PB6-010 | Bolt, special 6x22.5 | 1.15 | 2 | |
| 94109-12000 | Washer, drain plug, 12mm | 1.00 | 3 | |
| 96211-10000 | Ball, steel #10 (5/16) | 1.00 | 3 |