Counter shaft for Honda Avancier 1 generation 09.1999 - 08.2001
-
Grade
-
Drive
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
F23A
Volume
2.30
Frame
GH-TA1
Produсtion years
1999
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 21215-P6H-300 | Holder, idle shaft | 6.79 | 1 | |
| 23221-P6H-901 | Countershaft | 231.92 | 1 | |
| 23421-P6H-000 | Gear, countershaft low | 86.97 | 1 | |
| 23427-P6H-000 | Gear, parking | 72.47 | 1 | |
| 23441-P6H-000 | Gear, countershaft second | 75.79 | 1 | |
| 23451-P6H-000 | Gear, countershaft third | 72.47 | 1 | |
| 23471-P6H-000 | Gear, countershaft fourth | 63.78 | 1 | |
| 23491-P6H-010 | Gear, countershaft idle | 55.49 | 1 | |
| 23531-P6H-000 | Gear, countershaft reverse | 72.47 | 1 | |
| 23541-P6H-000 | Gear, reverse idle | 41.41 | 1 | |
| 23542-P6H-000 | Shaft, reverse idle gear | 5.72 | 1 | |
| 23565-PX4-700 | Selector, reverse gear | 35.53 | 1 | |
| 23566-P0Z-010 | Hub, selector | 28.91 | 1 | |
| 90201-P0Z-000 | Nut, flange 24mm | 5.30 | 1 | |
| 90402-P0Z-000 | Washer, spring 24mm | 3.98 | 1 | |
| 90431-P6H-000 | Cotter, 31mm | 1.12 | 2 | |
| 90441-P6H-000 | Collar, 34x44x50.5 | 8.28 | 1 | |
| 90614-P6H-000 | Ring, snap 34mm | 1.12 | 1 | |
| 91009-P6H-003 | Bearing, ball 60x78x10 | 16.57 | 1 | |
| 91022-P6H-003 | Bearing, thrust needle, 42x67x3 | 4.14 | 2 | |
| 91024-P6H-003 | Bearing, needle 40x46x14.5 | 4.97 | 1 | |
| 91025-P0X-003 | Bearing, needle 15x20x16 | 2.89 | 1 | |
| 91028-P6H-003 | Bearing, needle 34x40x26 | 5.80 | 1 | |
| 91035-P6H-003 | Bearing, needle 42x50x19 | 5.80 | 1 | |
| 91306-P0X-003 | O-ring 8.1x4 | 2.17 | 2 | |
|
95701-060-2008
|
Bolt, flange 6x20 | 1.00 | 2 | |
| 18 | ||||
| 90520-P6H-000 | Holder, bearing (a) | 16.15 | 1 | |
| 90521-P6H-000 | Holder, bearing (b) | 16.15 | 1 | |
| 90522-P6H-000 | Holder, bearing (c) | 16.15 | 1 | |
| 90523-P6H-000 | Holder, bearing (d) | 16.15 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L-4
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
F23A
Volume
2.30
Frame
GH-TA2
Produсtion years
1999
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 21215-P6H-300 | Holder, idle shaft | 6.79 | 1 | |
| 23221-PDW-000 | Countershaft | 225.29 | 1 | |
| 23421-P6H-000 | Gear, countershaft low | 86.97 | 1 | |
| 23427-P6H-000 | Gear, parking | 72.47 | 1 | |
| 23441-P6H-000 | Gear, countershaft second | 75.79 | 1 | |
| 23451-P6H-000 | Gear, countershaft third | 72.47 | 1 | |
| 23471-P6H-000 | Gear, countershaft fourth | 63.78 | 1 | |
| 23491-P6H-010 | Gear, countershaft idle | 55.49 | 1 | |
| 23531-P6H-000 | Gear, countershaft reverse | 72.47 | 1 | |
| 23541-P6H-000 | Gear, reverse idle | 41.41 | 1 | |
| 23542-P6H-000 | Shaft, reverse idle gear | 5.72 | 1 | |
| 23565-PX4-700 | Selector, reverse gear | 35.53 | 1 | |
| 23566-P0Z-010 | Hub, selector | 28.91 | 1 | |
| 90201-P0Z-000 | Nut, flange 24mm | 5.30 | 1 | |
| 90402-P0Z-000 | Washer, spring 24mm | 3.98 | 1 | |
| 90431-P6H-000 | Cotter, 31mm | 1.12 | 2 | |
| 90441-P6H-000 | Collar, 34x44x50.5 | 8.28 | 1 | |
| 90614-P6H-000 | Ring, snap 34mm | 1.12 | 1 | |
| 91009-P6H-003 | Bearing, ball 60x78x10 | 16.57 | 1 | |
| 91022-P6H-003 | Bearing, thrust needle, 42x67x3 | 4.14 | 2 | |
| 91024-P6H-003 | Bearing, needle 40x46x14.5 | 4.97 | 1 | |
| 91025-P0X-003 | Bearing, needle 15x20x16 | 2.89 | 1 | |
| 91028-P6H-003 | Bearing, needle 34x40x26 | 5.80 | 1 | |
| 91035-P6H-003 | Bearing, needle 42x50x19 | 5.80 | 1 | |
| 91306-P0X-003 | O-ring 8.1x4 | 2.17 | 2 | |
|
95701-060-2008
|
Bolt, flange 6x20 | 1.00 | 2 | |
| 18 | ||||
| 90520-P6H-000 | Holder, bearing (a) | 16.15 | 1 | |
| 90521-P6H-000 | Holder, bearing (b) | 16.15 | 1 | |
| 90522-P6H-000 | Holder, bearing (c) | 16.15 | 1 | |
| 90523-P6H-000 | Holder, bearing (d) | 16.15 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
V
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
J30A
Volume
3.00
Frame
GH-TA3
Produсtion years
1999
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 21215-P0Z-000 | Holder, idle shaft | Discontinued | 1 | |
| 23421-P7W-000 | Gear, countershaft low | 82.83 | 1 | |
| 23427-P7W-000 | Gear, parking | 72.47 | 1 | |
| 23441-P7W-000 | Gear, countershaft second | 69.99 | 1 | |
| 23451-P7W-000 | Gear, countershaft third | 70.40 | 1 | |
| 23471-PFY-000 | - | 58.39 | 1 | |
| 23491-PFY-000 | - | 55.91 | 1 | |
| 23531-P7Z-000 | Gear, countershaft reverse | 62.12 | 1 | |
| 23541-P0Z-000 | Gear, reverse idle | 41.25 | 1 | |
| 23542-P7T-000 | Shaft, reverse idle gear | 5.96 | 1 | |
| 23565-P0Z-000 | Selector, reverse gear | 32.80 | 1 | |
| 23566-P0Z-010 | Hub, selector | 28.91 | 1 | |
| 90203-P0Z-000 | Nut, flange, 24mm (left hand thread) | 5.30 | 1 | |
| 90402-P0Z-000 | Washer, spring 24mm | 3.98 | 1 | |
| 90431-P6H-000 | Cotter, 31mm | 1.12 | 2 | |
| 90441-P7Z-000 | Collar, 35x47x54 | 9.36 | 1 | |
| 90614-P0Z-000 | Ring, snap 35mm | 1.00 | 1 | |
| 91024-PAX-006 | Bearing, needle 40x46x14.5 | 5.38 | 1 | |
| 91025-P24-006 | Bearing, needle 14x18x15 | 3.23 | 2 | |
| 91028-P0Z-003 | Bearing, needle 35x41x26 | 5.38 | 1 | |
| 91035-PAX-006 | Bearing, needle 42x50x19 | 5.80 | 1 | |
| 91308-PW4-003 | O-ring 21.8x1.9 | 1.00 | 2 | |
| 95701-080-3208 | Bolt, flange 8x32 | 1.00 | 2 | |
| 2 | ||||
| 23220-PFY-010 | - | 227.78 | 1 | |
| 23220-PFY-020 | - | 227.78 | 1 | |
| 15 | ||||
| 90401-P0Z-000 | Washer, thrust 14x30x1 | 2.07 | 1 | |
| 90401-P7X-006 | Washer a, reverse idle gear | 2.11 | 1 | |
| 17 | ||||
| 90408-P7X-006 | Washer b, reverse idle gear | 2.03 | 1 | |
| 90408-PY4-000 | Washer, thrust 14x30x1 | 1.86 | 1 | |
| 20 | ||||
| 90520-P7W-000 | Washer a, 31x63.5x8.5 | 12.67 | 1 | |
| 90521-P7W-000 | Washer b, 31x63.5x8.5 | 12.67 | 1 | |
| 90522-P7W-000 | Washer c, 31x63.5x8.5 | 12.67 | 1 | |
| 90523-P7W-000 | Washer d, 31x63.5x8.5 | 12.67 | 1 | |
| 22 | ||||
| 91022-P0Z-013 | Bearing, thrust needle, 42x67x3.5 | 4.14 | 2 | |
| 91022-P7W-006 | - | 4.14 | 2 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
V-4
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
J30A
Volume
3.00
Frame
GH-TA4
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 21215-P0Z-000 | Holder, idle shaft | Discontinued | 1 | |
| 23220-P7W-010 | Shaft, transfer | 183.05 | 1 | |
| 23421-P7W-000 | Gear, countershaft low | 82.83 | 1 | |
| 23427-P7W-000 | Gear, parking | 72.47 | 1 | |
| 23441-P7W-000 | Gear, countershaft second | 69.99 | 1 | |
| 23451-P7W-000 | Gear, countershaft third | 70.40 | 1 | |
| 23471-PFY-000 | - | 58.39 | 1 | |
| 23491-PFY-000 | - | 55.91 | 1 | |
| 23531-P7Z-000 | Gear, countershaft reverse | 62.12 | 1 | |
| 23541-P0Z-000 | Gear, reverse idle | 41.25 | 1 | |
| 23542-P7T-000 | Shaft, reverse idle gear | 5.96 | 1 | |
| 23565-P0Z-000 | Selector, reverse gear | 32.80 | 1 | |
| 23566-P0Z-010 | Hub, selector | 28.91 | 1 | |
| 90203-P0Z-000 | Nut, flange, 24mm (left hand thread) | 5.30 | 1 | |
| 90402-P0Z-000 | Washer, spring 24mm | 3.98 | 1 | |
| 90431-P6H-000 | Cotter, 31mm | 1.12 | 2 | |
| 90441-P7Z-000 | Collar, 35x47x54 | 9.36 | 1 | |
| 90614-P0Z-000 | Ring, snap 35mm | 1.00 | 1 | |
| 91024-PAX-006 | Bearing, needle 40x46x14.5 | 5.38 | 1 | |
| 91025-P24-006 | Bearing, needle 14x18x15 | 3.23 | 2 | |
| 91028-P0Z-003 | Bearing, needle 35x41x26 | 5.38 | 1 | |
| 91035-PAX-006 | Bearing, needle 42x50x19 | 5.80 | 1 | |
| 91308-PW4-003 | O-ring 21.8x1.9 | 1.00 | 2 | |
| 95701-080-3208 | Bolt, flange 8x32 | 1.00 | 2 | |
| 15 | ||||
| 90401-P0Z-000 | Washer, thrust 14x30x1 | 2.07 | 1 | |
| 90401-P7X-006 | Washer a, reverse idle gear | 2.11 | 1 | |
| 17 | ||||
| 90408-P7X-006 | Washer b, reverse idle gear | 2.03 | 1 | |
| 90408-PY4-000 | Washer, thrust 14x30x1 | 1.86 | 1 | |
| 20 | ||||
| 90520-P7W-000 | Washer a, 31x63.5x8.5 | 12.67 | 1 | |
| 90521-P7W-000 | Washer b, 31x63.5x8.5 | 12.67 | 1 | |
| 90522-P7W-000 | Washer c, 31x63.5x8.5 | 12.67 | 1 | |
| 90523-P7W-000 | Washer d, 31x63.5x8.5 | 12.67 | 1 | |
| 22 | ||||
| 91022-P0Z-013 | Bearing, thrust needle, 42x67x3.5 | 4.14 | 2 | |
| 91022-P7W-006 | - | 4.14 | 2 | |