Number | Name | Price from, USD | Required |
---|
23220-PL4-J00 | Countershaft comp. | 190.97 | 1 | |
23421-PL4-J01 | Gear, countershaft low | 52.91 | 1 | |
23423-P48-J01 | Clutch assy., one way | 58.59 | 1 | |
23427-PL4-010 | Gear, parking | 56.63 | 1 | |
23441-PL4-J02 | Gear, countershaft second | 61.18 | 1 | |
23451-PL4-000 | Gear, countershaft third | 71.10 | 1 | |
23471-PP6-000 | Gear, countershaft fourth | 39.93 | 1 | |
23531-PH0-000 | Gear, countershaft reverse | 45.20 | 1 | |
23541-PA9-010 | Gear, reverse idle | 25.61 | 1 | |
23542-PH0-020 | Shaft, reverse idle gear | 7.11 | 1 | |
23543-PH0-000 | Spring a, idle gear shaft | 1.34 | 1 | |
23565-PP6-010 | Selector, reverse gear | 32.41 | 1 | |
23566-PH0-000 | Hub, selector | 27.20 | 1 | |
90202-PF4-010 | Nut, flange 23mm | 3.68 | 1 | |
90431-PC9-000 | Cotter, 28mm | 2.59 | 2 | |
90501-PL4-000 | Collar, reverse gear | 9.92 | 2 | |
91011-PG4-003 | Bearing, needle 32x38x20 | Discontinued | 1 | |
91014-PA9-003 | Bearing, thrust needle, 35x52x2 | 4.13 | 1 | |
91016-PA9-003 | Bearing, needle 28x33x20 | 5.53 | 1 | |
91024-PL4-003 | Bearing, needle 31x36x14 | 4.71 | 2 | |
91025-PJ2-003 | Bearing, needle 14x18x15 | 3.22 | 1 | |
96211-07000 | Ball, steel #7 (7/32) | 1.00 | 1 | |
15 | ||||
90411-PA9-010 | Washer, spline 35x50x3.00 | 5.19 | 1 | |
90412-PA9-010 | Washer, spline 35x50x3.05 | 5.19 | 1 | |
90413-PA9-010 | Washer, spline 35x50x3.10 | 5.19 | 1 | |
90414-PA9-010 | Washer, spline 35x50x3.15 | 5.19 | 1 | |
90415-PA9-010 | Washer, spline 35x50x3.20 | 5.19 | 1 | |
90418-PA9-000 | Washer, spline 35x50x3.25 | 5.19 | 1 | |
90419-PA9-000 | Washer, spline 35x50x3.30 | 5.19 | 1 | |
90420-PA9-000 | Washer, spline 35x50x3.35 | 5.19 | 1 | |
90421-PA9-000 | Washer, spline 35x50x3.40 | 5.19 | 1 | |
90423-PA9-000 | Washer, spline 35x50x2.90 | 5.19 | 1 | |
90424-PA9-000 | Washer, spline 35x50x2.95 | 5.19 | 1 | |
18 | ||||
90503-PC9-000 | Collar, distance, 28x38x39.00 | 9.46 | 1 | |
90504-PC9-000 | Collar, distance, 28x38x39.10 | 12.14 | 1 | |
90505-PC9-000 | Collar, distance, 28x38x39.20 | 14.06 | 1 | |
90507-PC9-000 | Collar, distance, 28x38x39.30 | 14.06 | 1 | |
90508-PC9-000 | Collar, distance, 28x38x39.05 | 12.14 | 1 | |
90509-PC9-000 | Collar, distance, 28x38x39.15 | 10.80 | 1 | |
90510-PC9-000 | Collar, distance, 28x38x39.25 | 14.06 | 1 | |
90511-PC9-000 | Collar, distance, 28x38x38.90 | 12.14 | 1 | |
90512-PC9-000 | Collar, distance, 28x38x38.95 | 12.14 | 1 | |
24 | ||||
91031-PC9-003 | Bearing, thrust needle, 39x54x2 | 4.84 | 1 | |
91031-PC9-005 | Bearing, thrust needle, 39x54x2 | 4.84 | 1 | |
91031-PC9-006 | Bearing, thrust needle, 39x54x2 (nippon seiko) | 4.30 | 1 | |
25 | ||||
91307-PA9-003 | O-ring, 31.2x1.9 | 1.26 | 2 | |
91307-PA9-004 | O-ring 31.2x1.9 | 1.26 | 2 |
Number | Name | Price from, USD | Required |
---|
23220-PL4-J00 | Countershaft comp. | 190.97 | 1 | |
23421-PL4-J01 | Gear, countershaft low | 52.91 | 1 | |
23423-P48-J01 | Clutch assy., one way | 58.59 | 1 | |
23427-PL4-010 | Gear, parking | 56.63 | 1 | |
23441-PL4-J02 | Gear, countershaft second | 61.18 | 1 | |
23451-PL4-850 | Gear, countershaft third | 76.47 | 1 | |
23471-PP6-850 | Gear, countershaft fourth | 44.64 | 1 | |
23531-PH0-000 | Gear, countershaft reverse | 45.20 | 1 | |
23541-PA9-010 | Gear, reverse idle | 25.61 | 1 | |
23542-PH0-020 | Shaft, reverse idle gear | 7.11 | 1 | |
23543-PH0-000 | Spring a, idle gear shaft | 1.34 | 1 | |
23565-PP6-010 | Selector, reverse gear | 32.41 | 1 | |
23566-PH0-000 | Hub, selector | 27.20 | 1 | |
90202-PF4-010 | Nut, flange 23mm | 3.68 | 1 | |
90431-PC9-000 | Cotter, 28mm | 2.59 | 2 | |
90501-PL4-000 | Collar, reverse gear | 9.92 | 2 | |
91011-PG4-003 | Bearing, needle 32x38x20 | Discontinued | 1 | |
91014-PA9-003 | Bearing, thrust needle, 35x52x2 | 4.13 | 1 | |
91016-PA9-003 | Bearing, needle 28x33x20 | 5.53 | 1 | |
91024-PL4-003 | Bearing, needle 31x36x14 | 4.71 | 2 | |
91025-PJ2-003 | Bearing, needle 14x18x15 | 3.22 | 1 | |
96211-07000 | Ball, steel #7 (7/32) | 1.00 | 1 | |
15 | ||||
90411-PA9-010 | Washer, spline 35x50x3.00 | 5.19 | 1 | |
90412-PA9-010 | Washer, spline 35x50x3.05 | 5.19 | 1 | |
90413-PA9-010 | Washer, spline 35x50x3.10 | 5.19 | 1 | |
90414-PA9-010 | Washer, spline 35x50x3.15 | 5.19 | 1 | |
90415-PA9-010 | Washer, spline 35x50x3.20 | 5.19 | 1 | |
90418-PA9-000 | Washer, spline 35x50x3.25 | 5.19 | 1 | |
90419-PA9-000 | Washer, spline 35x50x3.30 | 5.19 | 1 | |
90420-PA9-000 | Washer, spline 35x50x3.35 | 5.19 | 1 | |
90421-PA9-000 | Washer, spline 35x50x3.40 | 5.19 | 1 | |
90423-PA9-000 | Washer, spline 35x50x2.90 | 5.19 | 1 | |
90424-PA9-000 | Washer, spline 35x50x2.95 | 5.19 | 1 | |
18 | ||||
90503-PC9-000 | Collar, distance, 28x38x39.00 | 9.46 | 1 | |
90504-PC9-000 | Collar, distance, 28x38x39.10 | 12.14 | 1 | |
90505-PC9-000 | Collar, distance, 28x38x39.20 | 14.06 | 1 | |
90507-PC9-000 | Collar, distance, 28x38x39.30 | 14.06 | 1 | |
90508-PC9-000 | Collar, distance, 28x38x39.05 | 12.14 | 1 | |
90509-PC9-000 | Collar, distance, 28x38x39.15 | 10.80 | 1 | |
90510-PC9-000 | Collar, distance, 28x38x39.25 | 14.06 | 1 | |
90511-PC9-000 | Collar, distance, 28x38x38.90 | 12.14 | 1 | |
90512-PC9-000 | Collar, distance, 28x38x38.95 | 12.14 | 1 | |
24 | ||||
91031-PC9-003 | Bearing, thrust needle, 39x54x2 | 4.84 | 1 | |
91031-PC9-005 | Bearing, thrust needle, 39x54x2 | 4.84 | 1 | |
91031-PC9-006 | Bearing, thrust needle, 39x54x2 (nippon seiko) | 4.30 | 1 | |
25 | ||||
91307-PA9-003 | O-ring, 31.2x1.9 | 1.26 | 2 | |
91307-PA9-004 | O-ring 31.2x1.9 | 1.26 | 2 |
Number | Name | Price from, USD | Required |
---|
23221-P20-A71 | Countershaft | Discontinued | 1 | |
23421-P20-A00 | Gear, countershaft low | 75.23 | 1 | |
23431-P20-C00 | Gear, countershaft second | 59.11 | 1 | |
23461-P20-C00 | Gear, countershaft fifth | 32.24 | 1 | |
23471-P20-B00 | - | 45.47 | 1 | |
23481-P20-B00 | - | 45.47 | 1 | |
23521-P20-305 | Sleeve set, synchronizer (1-2) | 178.29 | 1 | |
23912-P20-010 | Collar, distance, 33x39x32 | Discontinued | 1 | |
23926-PB6-010 | Washer, spring 22mm | 3.06 | 1 | |
90202-PB6-010 | Nut, flange 22mm | 3.73 | 1 | |
90603-PL3-000 | Ring, snap 52mm | 1.32 | 1 | |
91003-PL3-B04 | Bearing, ball 25x52x14/15 | 8.65 | 1 | |
91006-PL3-A03 | Bearing, ball 25x52x15 | 8.47 | 1 | |
91104-P20-008 | Bearing, needle 36x41x25.5 | 5.77 | 1 | |
91105-P20-008 | Bearing, needle 39x44x27 | 5.77 | 1 | |
91211-PL3-T01 | Damper, friction | 5.34 | 1 | |
91212-P20-008 | Damper, friction | 6.53 | 1 |
Number | Name | Price from, USD | Required |
---|
23221-P20-A81 | - | 158.73 | 1 | |
23421-P20-A00 | Gear, countershaft low | 75.23 | 1 | |
23431-P20-C00 | Gear, countershaft second | 59.11 | 1 | |
23461-P20-C00 | Gear, countershaft fifth | 32.24 | 1 | |
23471-P20-B00 | - | 45.47 | 1 | |
23481-P20-B00 | - | 45.47 | 1 | |
23521-P20-305 | Sleeve set, synchronizer (1-2) | 178.29 | 1 | |
23912-P20-010 | Collar, distance, 33x39x32 | Discontinued | 1 | |
23926-PB6-010 | Washer, spring 22mm | 3.06 | 1 | |
90202-PB6-010 | Nut, flange 22mm | 3.73 | 1 | |
90603-PL3-000 | Ring, snap 52mm | 1.32 | 1 | |
91003-PL3-B04 | Bearing, ball 25x52x14/15 | 8.65 | 1 | |
91006-PL3-A03 | Bearing, ball 25x52x15 | 8.47 | 1 | |
91104-P20-008 | Bearing, needle 36x41x25.5 | 5.77 | 1 | |
91105-P20-008 | Bearing, needle 39x44x27 | 5.77 | 1 | |
91211-PL3-T01 | Damper, friction | 5.34 | 1 | |
91212-P20-008 | Damper, friction | 6.53 | 1 |
Number | Name | Price from, USD | Required |
---|
23221-P20-A51 | Countershaft | Discontinued | 1 | |
23421-P20-A00 | Gear, countershaft low | 75.23 | 1 | |
23431-P20-C00 | Gear, countershaft second | 59.11 | 1 | |
23461-P20-C00 | Gear, countershaft fifth | 32.24 | 1 | |
23471-P20-C00 | Gear, countershaft third | 57.46 | 1 | |
23481-P20-A00 | Gear, countershaft fourth | 45.47 | 1 | |
23912-P20-010 | Collar, distance, 33x39x32 | Discontinued | 1 | |
23926-PB6-010 | Washer, spring 22mm | 3.06 | 1 | |
90202-PB6-010 | Nut, flange 22mm | 3.73 | 1 | |
90603-PL3-000 | Ring, snap 52mm | 1.32 | 1 | |
91003-PL3-B04 | Bearing, ball 25x52x14/15 | 8.65 | 1 | |
91006-PL3-A03 | Bearing, ball 25x52x15 | 8.47 | 1 | |
91104-P20-008 | Bearing, needle 36x41x25.5 | 5.77 | 1 | |
91105-P20-008 | Bearing, needle 39x44x27 | 5.77 | 1 | |
91211-PL3-T01 | Damper, friction | 5.34 | 1 | |
91212-P20-008 | Damper, friction | 6.53 | 1 | |
7 | ||||
23521-P20-305 | Sleeve set, synchronizer (1-2) | 178.29 | 1 | |
23521-P20-315 | Sleeve set, synchronizer (1-2) | 178.29 | 1 |
Number | Name | Price from, USD | Required |
---|
23221-P20-A51 | Countershaft | Discontinued | 1 | |
23421-P20-A00 | Gear, countershaft low | 75.23 | 1 | |
23431-P20-A00 | Gear, countershaft second | Discontinued | 1 | |
23461-P20-A00 | Gear, countershaft fifth | Discontinued | 1 | |
23471-P20-A00 | Gear, countershaft third | Discontinued | 1 | |
23481-P20-A00 | Gear, countershaft fourth | 45.47 | 1 | |
23521-P20-305 | Sleeve set, synchronizer (1-2) | 178.29 | 1 | |
23912-P20-010 | Collar, distance, 33x39x32 | Discontinued | 1 | |
23926-PB6-010 | Washer, spring 22mm | 3.06 | 1 | |
90202-PB6-010 | Nut, flange 22mm | 3.73 | 1 | |
90603-PL3-000 | Ring, snap 52mm | 1.32 | 1 | |
91003-PL3-B04 | Bearing, ball 25x52x14/15 | 8.65 | 1 | |
91006-PL3-A03 | Bearing, ball 25x52x15 | 8.47 | 1 | |
91104-P20-008 | Bearing, needle 36x41x25.5 | 5.77 | 1 | |
91105-P20-008 | Bearing, needle 39x44x27 | 5.77 | 1 | |
91211-PL3-T01 | Damper, friction | 5.34 | 1 | |
91212-P20-008 | Damper, friction | 6.53 | 1 |
Number | Name | Price from, USD | Required |
---|
23221-P20-A41 | Countershaft | 168.65 | 1 | |
23421-P20-A00 | Gear, countershaft low | 75.23 | 1 | |
23431-P20-A00 | Gear, countershaft second | Discontinued | 1 | |
23461-P20-A00 | Gear, countershaft fifth | Discontinued | 1 | |
23471-P20-A00 | Gear, countershaft third | Discontinued | 1 | |
23481-P20-A00 | Gear, countershaft fourth | 45.47 | 1 | |
23521-P20-305 | Sleeve set, synchronizer (1-2) | 178.29 | 1 | |
23912-P20-010 | Collar, distance, 33x39x32 | Discontinued | 1 | |
23926-PB6-010 | Washer, spring 22mm | 3.06 | 1 | |
90202-PB6-010 | Nut, flange 22mm | 3.73 | 1 | |
90603-PL3-000 | Ring, snap 52mm | 1.32 | 1 | |
91003-PL3-B04 | Bearing, ball 25x52x14/15 | 8.65 | 1 | |
91102-PL3-B04 | Bearing, needle 25x52.2x15 | Discontinued | 1 | |
91104-P20-008 | Bearing, needle 36x41x25.5 | 5.77 | 1 | |
91105-P20-008 | Bearing, needle 39x44x27 | 5.77 | 1 | |
91211-PL3-T01 | Damper, friction | 5.34 | 1 | |
91212-P20-008 | Damper, friction | 6.53 | 1 |
Number | Name | Price from, USD | Required |
---|
23220-P24-H00 | - | 169.48 | 1 | |
23421-P24-J00 | Gear, countershaft low | 45.47 | 1 | |
23423-P24-J01 | Clutch assy., one way (nippon seiko) | 75.23 | 1 | |
23427-P24-J00 | Gear, parking | 46.71 | 1 | |
23441-P24-J00 | Gear, countershaft second | 52.08 | 1 | |
23451-P24-J00 | Gear, countershaft third | 53.74 | 1 | |
23471-P24-A00 | Gear, countershaft fourth | 39.27 | 1 | |
23531-P24-J00 | Gear, countershaft reverse | 57.46 | 1 | |
23541-PA9-010 | Gear, reverse idle | 25.61 | 1 | |
23543-PH0-000 | Spring a, idle gear shaft | 1.34 | 1 | |
23565-PF4-L03 | Selector, reverse gear | 33.81 | 1 | |
23566-PF4-000 | Hub, reverse selector | 31.56 | 1 | |
90202-PF4-010 | Nut, flange 23mm | 3.68 | 1 | |
90431-PC9-000 | Cotter, 28mm | 2.59 | 2 | |
90509-PF4-000 | Collar, countershaft low gear | 5.45 | 2 | |
91016-P56-003 | Bearing, needle 28x33x21 | 5.13 | 1 | |
91024-PF4-003 | Bearing, needle 32x38x14 | 4.77 | 2 | |
91025-PJ2-003 | Bearing, needle 14x18x15 | 3.22 | 1 | |
91028-P24-J02 | Bearing, needle 32x38x24 | 5.13 | 1 | |
91031-P24-J01 | Bearing, thrust needle, 39x54x2.5 | 3.44 | 2 | |
96211-07000 | Ball, steel #7 (7/32) | 1.00 | 1 | |
14 | ||||
90411-P24-J00 | Washer, spline 35x52x3.45 | 3.80 | 1 | |
90411-PF4-000 | Washer, spline 35x52x3.00 | 3.97 | 1 | |
90412-P24-J00 | Washer, spline 35x52x3.50 | 4.71 | 1 | |
90412-PF4-000 | Washer, spline 35x52x3.05 | 3.97 | 1 | |
90413-P24-J00 | Washer, spline 35x52x3.55 | 4.71 | 1 | |
90413-PF4-000 | Washer, spline 35x52x3.10 | 3.97 | 1 | |
90414-P24-J00 | Washer, spline 35x52x3.60 | 4.71 | 1 | |
90414-PF4-000 | Washer, spline 35x52x3.15 | 3.97 | 1 | |
90415-PF4-000 | Washer, spline 35x52x3.20 | 3.97 | 1 | |
90416-PF4-000 | Washer, spline 35x52x3.25 | 3.97 | 1 | |
90417-PF4-000 | Washer, spline 35x52x3.30 | 5.70 | 1 | |
90418-PF4-000 | Washer, spline 35x52x3.35 | 3.97 | 1 | |
90419-PF4-000 | Washer, spline 35x52x3.40 | 3.97 | 1 | |
16 | ||||
90503-PC9-000 | Collar, distance, 28x38x39.00 | 9.46 | 1 | |
90504-PC9-000 | Collar, distance, 28x38x39.10 | 12.14 | 1 | |
90505-PC9-000 | Collar, distance, 28x38x39.20 | 14.06 | 1 | |
90507-PC9-000 | Collar, distance, 28x38x39.30 | 14.06 | 1 | |
90508-PC9-000 | Collar, distance, 28x38x39.05 | 12.14 | 1 | |
90509-PC9-000 | Collar, distance, 28x38x39.15 | 10.80 | 1 | |
90510-PC9-000 | Collar, distance, 28x38x39.25 | 14.06 | 1 | |
90511-PC9-000 | Collar, distance, 28x38x38.90 | 12.14 | 1 | |
90512-PC9-000 | Collar, distance, 28x38x38.95 | 12.14 | 1 | |
23 | ||||
91307-PA9-003 | O-ring, 31.2x1.9 | 1.26 | 2 | |
91307-PA9-004 | O-ring 31.2x1.9 | 1.26 | 2 |
Number | Name | Price from, USD | Required |
---|
23220-P24-J01 | Countershaft comp. | 169.48 | 1 | |
23421-P24-J00 | Gear, countershaft low | 45.47 | 1 | |
23423-P24-J01 | Clutch assy., one way (nippon seiko) | 75.23 | 1 | |
23441-P24-J00 | Gear, countershaft second | 52.08 | 1 | |
23451-P24-J00 | Gear, countershaft third | 53.74 | 1 | |
23471-P24-J00 | Gear, countershaft fourth | 39.27 | 1 | |
23531-P24-J00 | Gear, countershaft reverse | 57.46 | 1 | |
23541-PA9-010 | Gear, reverse idle | 25.61 | 1 | |
23543-PH0-000 | Spring a, idle gear shaft | 1.34 | 1 | |
23565-PF4-L03 | Selector, reverse gear | 33.81 | 1 | |
23566-PF4-000 | Hub, reverse selector | 31.56 | 1 | |
90202-PF4-010 | Nut, flange 23mm | 3.68 | 1 | |
90431-PC9-000 | Cotter, 28mm | 2.59 | 2 | |
90509-PF4-000 | Collar, countershaft low gear | 5.45 | 2 | |
91016-P24-J01 | Bearing, needle 28x33x21 | 5.13 | 1 | |
91024-PF4-003 | Bearing, needle 32x38x14 | 4.77 | 2 | |
91025-PJ2-003 | Bearing, needle 14x18x15 | 3.22 | 1 | |
91031-PG4-003 | Bearing, thrust needle, 39x54x2.5 | 3.44 | 2 | |
96211-07000 | Ball, steel #7 (7/32) | 1.00 | 1 | |
4 | ||||
23427-P24-J00 | Gear, parking | 46.71 | 1 | |
23427-PN6-801 | Gear, parking | 50.02 | 1 | |
14 | ||||
90411-P24-J00 | Washer, spline 35x52x3.45 | 3.80 | 1 | |
90411-PF4-000 | Washer, spline 35x52x3.00 | 3.97 | 1 | |
90412-P24-J00 | Washer, spline 35x52x3.50 | 4.71 | 1 | |
90412-PF4-000 | Washer, spline 35x52x3.05 | 3.97 | 1 | |
90413-P24-J00 | Washer, spline 35x52x3.55 | 4.71 | 1 | |
90413-PF4-000 | Washer, spline 35x52x3.10 | 3.97 | 1 | |
90414-P24-J00 | Washer, spline 35x52x3.60 | 4.71 | 1 | |
90414-PF4-000 | Washer, spline 35x52x3.15 | 3.97 | 1 | |
90415-PF4-000 | Washer, spline 35x52x3.20 | 3.97 | 1 | |
90416-PF4-000 | Washer, spline 35x52x3.25 | 3.97 | 1 | |
90417-PF4-000 | Washer, spline 35x52x3.30 | 5.70 | 1 | |
90418-PF4-000 | Washer, spline 35x52x3.35 | 3.97 | 1 | |
90419-PF4-000 | Washer, spline 35x52x3.40 | 3.97 | 1 | |
16 | ||||
90503-PC9-000 | Collar, distance, 28x38x39.00 | 9.46 | 1 | |
90504-PC9-000 | Collar, distance, 28x38x39.10 | 12.14 | 1 | |
90505-PC9-000 | Collar, distance, 28x38x39.20 | 14.06 | 1 | |
90507-PC9-000 | Collar, distance, 28x38x39.30 | 14.06 | 1 | |
90508-PC9-000 | Collar, distance, 28x38x39.05 | 12.14 | 1 | |
90509-PC9-000 | Collar, distance, 28x38x39.15 | 10.80 | 1 | |
90510-PC9-000 | Collar, distance, 28x38x39.25 | 14.06 | 1 | |
90511-PC9-000 | Collar, distance, 28x38x38.90 | 12.14 | 1 | |
90512-PC9-000 | Collar, distance, 28x38x38.95 | 12.14 | 1 | |
21 | ||||
91028-P24-J01 | Bearing, needle 32x38x24 | 5.13 | 1 | |
91028-P24-J02 | Bearing, needle 32x38x24 | 5.13 | 1 | |
23 | ||||
91307-PA9-003 | O-ring, 31.2x1.9 | 1.26 | 2 | |
91307-PA9-004 | O-ring 31.2x1.9 | 1.26 | 2 |
Number | Name | Price from, USD | Required |
---|
23220-P24-J01 | Countershaft comp. | 169.48 | 1 | |
23421-P24-J00 | Gear, countershaft low | 45.47 | 1 | |
23423-P24-J01 | Clutch assy., one way (nippon seiko) | 75.23 | 1 | |
23441-P24-N00 | - | 52.08 | 1 | |
23451-P24-N00 | - | 66.14 | 1 | |
23471-P24-N00 | Gear, countershaft fourth | 39.27 | 1 | |
23531-P24-J00 | Gear, countershaft reverse | 57.46 | 1 | |
23541-PA9-010 | Gear, reverse idle | 25.61 | 1 | |
23543-PH0-000 | Spring a, idle gear shaft | 1.34 | 1 | |
23565-PF4-L03 | Selector, reverse gear | 33.81 | 1 | |
23566-PF4-000 | Hub, reverse selector | 31.56 | 1 | |
90202-PF4-010 | Nut, flange 23mm | 3.68 | 1 | |
90431-PC9-000 | Cotter, 28mm | 2.59 | 2 | |
90509-PF4-000 | Collar, countershaft low gear | 5.45 | 2 | |
91016-P24-J01 | Bearing, needle 28x33x21 | 5.13 | 1 | |
91024-PF4-003 | Bearing, needle 32x38x14 | 4.77 | 2 | |
91025-PJ2-003 | Bearing, needle 14x18x15 | 3.22 | 1 | |
91031-PG4-003 | Bearing, thrust needle, 39x54x2.5 | 3.44 | 2 | |
96211-07000 | Ball, steel #7 (7/32) | 1.00 | 1 | |
4 | ||||
23427-P24-J00 | Gear, parking | 46.71 | 1 | |
23427-PN6-801 | Gear, parking | 50.02 | 1 | |
14 | ||||
90411-P24-J00 | Washer, spline 35x52x3.45 | 3.80 | 1 | |
90411-PF4-000 | Washer, spline 35x52x3.00 | 3.97 | 1 | |
90412-P24-J00 | Washer, spline 35x52x3.50 | 4.71 | 1 | |
90412-PF4-000 | Washer, spline 35x52x3.05 | 3.97 | 1 | |
90413-P24-J00 | Washer, spline 35x52x3.55 | 4.71 | 1 | |
90413-PF4-000 | Washer, spline 35x52x3.10 | 3.97 | 1 | |
90414-P24-J00 | Washer, spline 35x52x3.60 | 4.71 | 1 | |
90414-PF4-000 | Washer, spline 35x52x3.15 | 3.97 | 1 | |
90415-PF4-000 | Washer, spline 35x52x3.20 | 3.97 | 1 | |
90416-PF4-000 | Washer, spline 35x52x3.25 | 3.97 | 1 | |
90417-PF4-000 | Washer, spline 35x52x3.30 | 5.70 | 1 | |
90418-PF4-000 | Washer, spline 35x52x3.35 | 3.97 | 1 | |
90419-PF4-000 | Washer, spline 35x52x3.40 | 3.97 | 1 | |
16 | ||||
90503-PC9-000 | Collar, distance, 28x38x39.00 | 9.46 | 1 | |
90504-PC9-000 | Collar, distance, 28x38x39.10 | 12.14 | 1 | |
90505-PC9-000 | Collar, distance, 28x38x39.20 | 14.06 | 1 | |
90507-PC9-000 | Collar, distance, 28x38x39.30 | 14.06 | 1 | |
90508-PC9-000 | Collar, distance, 28x38x39.05 | 12.14 | 1 | |
90509-PC9-000 | Collar, distance, 28x38x39.15 | 10.80 | 1 | |
90510-PC9-000 | Collar, distance, 28x38x39.25 | 14.06 | 1 | |
90511-PC9-000 | Collar, distance, 28x38x38.90 | 12.14 | 1 | |
90512-PC9-000 | Collar, distance, 28x38x38.95 | 12.14 | 1 | |
21 | ||||
91028-P24-J01 | Bearing, needle 32x38x24 | 5.13 | 1 | |
91028-P24-J02 | Bearing, needle 32x38x24 | 5.13 | 1 | |
23 | ||||
91307-PA9-003 | O-ring, 31.2x1.9 | 1.26 | 2 | |
91307-PA9-004 | O-ring 31.2x1.9 | 1.26 | 2 |