Intake manifold for Honda Civic Ferio 1 generation 09.1991 - 08.1995
-
Grade
-
Transmission
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
EL
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
D13B
Volume
1.30
Frame
E-EG7
Produсtion years
1991
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11856-PM3-000 | Tube comp., pcv | Discontinued | 1 | |
|
16105-PJ7-000
|
O-ring, carburetor insulator | Discontinued | 1 | |
| 16210-PM3-000 | Insulator | Discontinued | 1 | |
| 16212-PM1-G00 | Packing, carburetor insulator | Discontinued | 1 | |
| 16236-PM3-000 | Clamp b, fuel filter | 1.41 | 1 | |
| 16238-PM3-010 | Stay, fuel hose clamp | 1.65 | 1 | |
| 16239-PG6-300 | Clamp, fuel hose | Discontinued | 1 | |
| 16700-PM3-000 | Pump assy., fuel | Discontinued | 1 | |
| 16701-PM3-S00 | Insulator comp., fuel pump | Discontinued | 1 | |
| 17000-PM3-000 | - | 205.85 | 1 | |
| 17130-PM3-003 | Valve assy., pcv | Discontinued | 1 | |
| 17132-P01-000 | Stay, intake manifold | 11.08 | 1 | |
| 17133-PM3-000 | Stay, carburetor solenoid coupler | 1.65 | 1 | |
| 17365-P01-000 | Stay, vacuum control tube clamp | 1.86 | 1 | |
| 18011-P01-900 | - | 100.03 | 1 | |
|
18715-PB2-000
|
Gasket, egr valve (ishino gasket) | 3.22 | 1 | |
| 19508-PM3-000 | Hose, bypass outlet | Discontinued | 1 | |
|
19513-PE0-003
|
Clamp, water hose | 1.69 | 2 | |
| 36450-PM3-014 | Valve assy., electronic air control | Discontinued | 1 | |
|
36455-PM3-J01
|
Packing, electronic air control valve | 2.01 | 1 | |
| 90064-PH1-300 | Bolt, stud 8x57 | 1.74 | 4 | |
| 91405-679-004 | Clamp, tube (d17) | 2.42 | 2 | |
| 92900-080-200B | Bolt, stud 8x20 | 1.00 | 2 | |
| 93404-060-1607 | Bolt-washer, 6x16 | 1.00 | 1 | |
| 94001-080-800S | Nut, hex., 8mm | 1.00 | 2 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 9 | |
| 94102-08800 | Washer, plain 8mm | 1.00 | 2 | |
| 94111-08800 | Washer, spring 8mm | 1.00 | 2 | |
|
95701-060-1008
|
Bolt, flange 6x10 | 1.00 | 1 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 95701-080-3508 | Bolt, flange 8x35 | 1.00 | 1 | |
| 95701-080-4508 | Bolt, flange 8x45 | 1.00 | 1 | |
| 11 | ||||
| 17105-P01-003 | Gasket, intake manifold (ishino gasket) | Discontinued | 1 | |
| 17105-P01-004 | Gasket, intake manifold (nippon leakless) | 10.33 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
EL
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
D13B
Volume
1.30
Frame
E-EG7
Produсtion years
1991
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11856-PM3-000 | Tube comp., pcv | Discontinued | 1 | |
|
16105-PJ7-000
|
O-ring, carburetor insulator | Discontinued | 1 | |
| 16210-PM3-000 | Insulator | Discontinued | 1 | |
| 16212-PM1-G00 | Packing, carburetor insulator | Discontinued | 1 | |
| 16236-PM3-000 | Clamp b, fuel filter | 1.41 | 1 | |
| 16238-PM3-010 | Stay, fuel hose clamp | 1.65 | 1 | |
| 16239-PG6-300 | Clamp, fuel hose | Discontinued | 1 | |
| 16700-PM3-000 | Pump assy., fuel | Discontinued | 1 | |
| 16701-PM3-S00 | Insulator comp., fuel pump | Discontinued | 1 | |
| 17000-PM3-000 | - | 205.85 | 1 | |
| 17130-PM3-003 | Valve assy., pcv | Discontinued | 1 | |
| 17132-P01-000 | Stay, intake manifold | 11.08 | 1 | |
| 17133-PM3-000 | Stay, carburetor solenoid coupler | 1.65 | 1 | |
| 17365-P01-000 | Stay, vacuum control tube clamp | 1.86 | 1 | |
| 18011-P01-000 | - | 100.03 | 1 | |
|
18715-PB2-000
|
Gasket, egr valve (ishino gasket) | 3.22 | 1 | |
| 19508-PM3-000 | Hose, bypass outlet | Discontinued | 1 | |
|
19513-PE0-003
|
Clamp, water hose | 1.69 | 2 | |
| 36450-PM3-014 | Valve assy., electronic air control | Discontinued | 1 | |
|
36455-PM3-J01
|
Packing, electronic air control valve | 2.01 | 1 | |
| 90064-PH1-300 | Bolt, stud 8x57 | 1.74 | 4 | |
| 91405-679-004 | Clamp, tube (d17) | 2.42 | 2 | |
| 92900-080-200B | Bolt, stud 8x20 | 1.00 | 2 | |
| 93404-060-1607 | Bolt-washer, 6x16 | 1.00 | 1 | |
| 94001-080-800S | Nut, hex., 8mm | 1.00 | 2 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 9 | |
| 94102-08800 | Washer, plain 8mm | 1.00 | 2 | |
| 94111-08800 | Washer, spring 8mm | 1.00 | 2 | |
|
95701-060-1008
|
Bolt, flange 6x10 | 1.00 | 1 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 95701-080-3508 | Bolt, flange 8x35 | 1.00 | 1 | |
| 95701-080-4508 | Bolt, flange 8x45 | 1.00 | 1 | |
| 11 | ||||
| 17105-P01-003 | Gasket, intake manifold (ishino gasket) | Discontinued | 1 | |
| 17105-P01-004 | Gasket, intake manifold (nippon leakless) | 10.33 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
ML
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
D15B
Volume
1.50
Frame
E-EG8
Produсtion years
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11856-PM3-000 | Tube comp., pcv | Discontinued | 1 | |
|
16105-PJ7-000
|
O-ring, carburetor insulator | Discontinued | 1 | |
| 16210-P00-T00 | Insulator | Discontinued | 1 | |
| 16212-PM1-G00 | Packing, carburetor insulator | Discontinued | 1 | |
| 16236-PM3-000 | Clamp b, fuel filter | 1.41 | 1 | |
| 16238-PM3-010 | Stay, fuel hose clamp | 1.65 | 1 | |
| 16239-PG6-300 | Clamp, fuel hose | Discontinued | 1 | |
| 16700-PM3-000 | Pump assy., fuel | Discontinued | 1 | |
| 16701-PM3-S00 | Insulator comp., fuel pump | Discontinued | 1 | |
| 17130-PM3-003 | Valve assy., pcv | Discontinued | 1 | |
| 17132-P01-000 | Stay, intake manifold | 11.08 | 1 | |
| 17133-PM3-000 | Stay, carburetor solenoid coupler | 1.65 | 1 | |
| 17365-P01-000 | Stay, vacuum control tube clamp | 1.86 | 1 | |
| 18011-P01-900 | - | 100.03 | 1 | |
|
18715-PB2-000
|
Gasket, egr valve (ishino gasket) | 3.22 | 1 | |
| 19508-PM3-000 | Hose, bypass outlet | Discontinued | 1 | |
|
19513-PE0-003
|
Clamp, water hose | 1.69 | 2 | |
| 36450-PM3-014 | Valve assy., electronic air control | Discontinued | 1 | |
|
36455-PM3-J01
|
Packing, electronic air control valve | 2.01 | 1 | |
| 90064-PH1-300 | Bolt, stud 8x57 | 1.74 | 4 | |
| 91405-679-004 | Clamp, tube (d17) | 2.42 | 2 | |
| 92900-080-200B | Bolt, stud 8x20 | 1.00 | 2 | |
| 93404-060-1607 | Bolt-washer, 6x16 | 1.00 | 1 | |
| 94001-080-800S | Nut, hex., 8mm | 1.00 | 2 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 9 | |
| 94102-08800 | Washer, plain 8mm | 1.00 | 2 | |
| 94111-08800 | Washer, spring 8mm | 1.00 | 2 | |
|
95701-060-1008
|
Bolt, flange 6x10 | 1.00 | 1 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 95701-080-3508 | Bolt, flange 8x35 | 1.00 | 1 | |
| 95701-080-4508 | Bolt, flange 8x45 | 1.00 | 1 | |
| 17100-PM3-000 | - | 205.85 | 1 | |
| 11 | ||||
| 17105-P01-003 | Gasket, intake manifold (ishino gasket) | Discontinued | 1 | |
| 17105-P01-004 | Gasket, intake manifold (nippon leakless) | 10.33 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
ML
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
D15B
Volume
1.50
Frame
E-EG8
Produсtion years
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11856-PM3-000 | Tube comp., pcv | Discontinued | 1 | |
|
16105-PJ7-000
|
O-ring, carburetor insulator | Discontinued | 1 | |
| 16210-P00-T00 | Insulator | Discontinued | 1 | |
| 16212-PM1-G00 | Packing, carburetor insulator | Discontinued | 1 | |
| 16236-PM3-000 | Clamp b, fuel filter | 1.41 | 1 | |
| 16238-PM3-010 | Stay, fuel hose clamp | 1.65 | 1 | |
| 16239-PG6-300 | Clamp, fuel hose | Discontinued | 1 | |
| 16700-PM3-000 | Pump assy., fuel | Discontinued | 1 | |
| 16701-PM3-S00 | Insulator comp., fuel pump | Discontinued | 1 | |
| 17130-PM3-003 | Valve assy., pcv | Discontinued | 1 | |
| 17132-P01-000 | Stay, intake manifold | 11.08 | 1 | |
| 17133-PM3-000 | Stay, carburetor solenoid coupler | 1.65 | 1 | |
| 17365-P01-000 | Stay, vacuum control tube clamp | 1.86 | 1 | |
| 18011-P01-000 | - | 100.03 | 1 | |
|
18715-PB2-000
|
Gasket, egr valve (ishino gasket) | 3.22 | 1 | |
| 19508-PM3-000 | Hose, bypass outlet | Discontinued | 1 | |
|
19513-PE0-003
|
Clamp, water hose | 1.69 | 2 | |
| 36450-PM3-014 | Valve assy., electronic air control | Discontinued | 1 | |
|
36455-PM3-J01
|
Packing, electronic air control valve | 2.01 | 1 | |
| 90064-PH1-300 | Bolt, stud 8x57 | 1.74 | 4 | |
| 91405-679-004 | Clamp, tube (d17) | 2.42 | 2 | |
| 92900-080-200B | Bolt, stud 8x20 | 1.00 | 2 | |
| 93404-060-1607 | Bolt-washer, 6x16 | 1.00 | 1 | |
| 94001-080-800S | Nut, hex., 8mm | 1.00 | 2 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 9 | |
| 94102-08800 | Washer, plain 8mm | 1.00 | 2 | |
| 94111-08800 | Washer, spring 8mm | 1.00 | 2 | |
|
95701-060-1008
|
Bolt, flange 6x10 | 1.00 | 1 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 95701-080-3508 | Bolt, flange 8x35 | 1.00 | 1 | |
| 95701-080-4508 | Bolt, flange 8x45 | 1.00 | 1 | |
| 17100-PM3-000 | - | 205.85 | 1 | |
| 11 | ||||
| 17105-P01-003 | Gasket, intake manifold (ishino gasket) | Discontinued | 1 | |
| 17105-P01-004 | Gasket, intake manifold (nippon leakless) | 10.33 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
ETI
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
D15B
Volume
1.50
Frame
E-EG8
Produсtion years
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 16472-PD6-000 | Seal ring, injector | 3.60 | 4 | |
|
16473-PD6-000
|
Cushion ring, injector | 2.88 | 4 | |
| 16620-P07-000 | Pipe assy., fuel | 95.90 | 1 | |
| 16638-PH3-S00 | Insulator, fuel pipe | 1.55 | 3 | |
| 16740-P05-A01 | Regulator assy., pressure | Discontinued | 1 | |
| 16741-PG7-005 | O-ring, pressure regulator | 1.15 | 1 | |
| 17100-P07-900 | - | 281.08 | 1 | |
| 17132-P07-000 | Stay comp., intake manifold | 14.55 | 1 | |
| 18011-P07-000 | Valve set, egr | Discontinued | 1 | |
|
18715-PB2-000
|
Gasket, egr valve (ishino gasket) | 3.22 | 1 | |
| 37880-P05-A00 | Sensor assy., air temp | 17.29 | 1 | |
| 90002-PD6-000 | Bolt, stud 6x43 | Discontinued | 2 | |
| 91303-PK2-005 | O-ring 7.5x1.5 | 1.00 | 1 | |
| 92900-060-180B | Bolt, stud 6x18 | 1.00 | 2 | |
| 92900-060-280B | Bolt, stud 6x28 | 1.00 | 1 | |
| 92900-080-220B | Bolt, stud 8x22 | 1.00 | 2 | |
| 92900-080-351B | Bolt, stud 8x35 | 1.00 | 4 | |
| 93893-050-1608 | Screw-washer, 5x16 | 1.00 | 2 | |
|
94050-06080
|
Nut, flange 6mm | 1.00 | 3 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 9 | |
|
95701-060-1408
|
Bolt, flange 6x14 | 1.00 | 2 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 1 | ||||
| 06164-P05-A00 | Packing set, injector | 113.84 | 4 | |
| 06164-P05-A01 | Packing set, injector | 113.84 | 4 | |
| 06164-P05-A02 | Packing set, injector | 113.84 | 4 | |
| 10 | ||||
| 17105-P07-003 | Gasket, intake manifold (ishino gasket) | 10.33 | 1 | |
| 17105-P07-004 | Gasket, intake manifold (nippon leakless) | 10.33 | 1 | |
| 17 | ||||
| 91301-PD6-003 | O-ring, 7.3x2.2 | 2.38 | 4 | |
| 91301-PM7-003 | O-ring, 7.3x2.2 | 2.38 | 4 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
VTI
Drive
FF
Transmission
AT
MT
Fuel
Gasoline
Engine
D15B
Volume
1.50
Frame
E-EG8
Produсtion years
1991
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 06164-P06-A00 | Packing set, injector | Discontinued | 4 | |
| 16472-PD6-000 | Seal ring, injector | 3.60 | 4 | |
|
16473-PD6-000
|
Cushion ring, injector | 2.88 | 4 | |
| 16638-PH3-S00 | Insulator, fuel pipe | 1.55 | 3 | |
| 16740-P05-A00 | Regulator assy., pressure | Discontinued | 1 | |
| 16741-PG7-005 | O-ring, pressure regulator | 1.15 | 1 | |
| 17100-P08-000 | Manifold comp., intake | 229.00 | 1 | |
| 37880-P05-A00 | Sensor assy., air temp | 17.29 | 1 | |
| 92900-060-280B | Bolt, stud 6x28 | 1.00 | 1 | |
| 91301-PD6-003 | O-ring, 7.3x2.2 | 2.38 | 4 | |
| 91303-PK2-005 | O-ring 7.5x1.5 | 1.00 | 1 | |
| 92900-060-181B | Bolt, stud 6x18 | 1.00 | 2 | |
| 92900-080-351B | Bolt, stud 8x35 | 1.00 | 4 | |
| 93893-050-1608 | Screw-washer, 5x16 | 1.00 | 2 | |
|
94050-06080
|
Nut, flange 6mm | 1.00 | 3 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 7 | |
|
95701-060-1408
|
Bolt, flange 6x14 | 1.00 | 2 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 4 | |
| 16620-P05-A00 | Pipe assy., fuel | Discontinued | 1 | |
| 17132-P06-A00 | Stay, intake manifold | 14.55 | 1 | |
| 10 | ||||
| 17105-P08-003 | Gasket, intake manifold (ishino gasket) | Discontinued | 1 | |
| 17105-P08-004 | Gasket, intake manifold (nippon leakless) | Discontinued | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
ETI
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
D15B
Volume
1.50
Frame
E-EG8
Produсtion years
1991
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 06164-P05-A00 | Packing set, injector | 113.84 | 4 | |
| 16472-PD6-000 | Seal ring, injector | 3.60 | 4 | |
|
16473-PD6-000
|
Cushion ring, injector | 2.88 | 4 | |
| 16620-P07-000 | Pipe assy., fuel | 95.90 | 1 | |
| 16638-PH3-S00 | Insulator, fuel pipe | 1.55 | 3 | |
| 16740-P05-A00 | Regulator assy., pressure | Discontinued | 1 | |
| 16741-PG7-005 | O-ring, pressure regulator | 1.15 | 1 | |
| 17100-P07-000 | - | 281.08 | 1 | |
| 17132-P07-000 | Stay comp., intake manifold | 14.55 | 1 | |
| 18011-P07-000 | Valve set, egr | Discontinued | 1 | |
|
18715-PB2-000
|
Gasket, egr valve (ishino gasket) | 3.22 | 1 | |
| 37880-P05-A00 | Sensor assy., air temp | 17.29 | 1 | |
| 90002-PD6-000 | Bolt, stud 6x43 | Discontinued | 2 | |
| 91301-PD6-003 | O-ring, 7.3x2.2 | 2.38 | 4 | |
| 91303-PK2-005 | O-ring 7.5x1.5 | 1.00 | 1 | |
| 92900-060-180B | Bolt, stud 6x18 | 1.00 | 2 | |
| 92900-060-280B | Bolt, stud 6x28 | 1.00 | 1 | |
| 92900-080-220B | Bolt, stud 8x22 | 1.00 | 2 | |
| 92900-080-351B | Bolt, stud 8x35 | 1.00 | 4 | |
| 93893-050-1608 | Screw-washer, 5x16 | 1.00 | 2 | |
|
94050-06080
|
Nut, flange 6mm | 1.00 | 3 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 9 | |
|
95701-060-1408
|
Bolt, flange 6x14 | 1.00 | 2 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 10 | ||||
| 17105-P07-003 | Gasket, intake manifold (ishino gasket) | 10.33 | 1 | |
| 17105-P07-004 | Gasket, intake manifold (nippon leakless) | 10.33 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
MX
Drive
FF
Transmission
AT
MT
Fuel
Gasoline
Engine
D15B
Volume
1.50
Frame
E-EG8
Produсtion years
1991
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11856-PM4-000 | Tube, pcv | Discontinued | 1 | |
| 11857-PM4-003 | Clamp, pcv tube | 1.41 | 1 | |
| 16211-PR6-000 | Insulator comp., carburetor | Discontinued | 2 | |
| 16236-PM4-010 | Clamp b, fuel filter | 2.40 | 1 | |
| 16240-PR6-000 | Band, carburetor insulator | Discontinued | 2 | |
| 16700-PM3-000 | Pump assy., fuel | Discontinued | 1 | |
| 16701-PM3-S00 | Insulator comp., fuel pump | Discontinued | 1 | |
| 17000-PM4-010 | Manifold assy., intake | 162.03 | 1 | |
| 17130-PM3-003 | Valve assy., pcv | Discontinued | 1 | |
| 17132-P03-000 | Stay | 12.32 | 1 | |
| 17207-PM4-000 | Mounting | 1.65 | 2 | |
| 17208-PC6-000 | Washer, plain | 2.76 | 4 | |
| 17209-PC6-000 | Collar, mounting | 1.57 | 2 | |
| 17365-P01-000 | Stay, vacuum control tube clamp | 1.86 | 1 | |
| 17511-PM4-010 | Tube, electronic air control valve outer | 4.71 | 1 | |
| 17731-PM4-000 | Tube, slow air jet control | Discontinued | 1 | |
| 17732-PM4-000 | Tube, r. vacuum piston control | Discontinued | 1 | |
| 17733-PM4-000 | Tube, l. vacuum piston control | Discontinued | 1 | |
| 17734-PM4-000 | Tube, l. inner vent | Discontinued | 1 | |
| 17736-PM4-000 | Tube, slow air jet control | Discontinued | 1 | |
| 19508-PM4-000 | Hose, bypass outlet | 2.94 | 1 | |
|
19513-PE0-003
|
Clamp, water hose | 1.69 | 2 | |
| 36140-P03-004 | Valve assy., inner vent solenoid | Discontinued | 1 | |
| 36141-P03-000 | Packing assy., inner vent solenoid | Discontinued | 1 | |
| 36157-PM4-000 | Tube, vacuum piston control valve | Discontinued | 2 | |
| 36450-PJ7-003 | Valve assy., electronic air control | Discontinued | 1 | |
| 90063-PC6-000 | Bolt, stud 6x25 | Discontinued | 4 | |
| 90100-PR6-000 | Screw, pan 6x32 | 1.00 | 2 | |
| 91301-PB9-000 | O-ring 51.6x2.4 | Discontinued | 2 | |
| 91405-679-004 | Clamp, tube (d17) | 2.42 | 2 | |
| 93892-050-1208 | Screw-washer, 5x12 | 1.00 | 4 | |
| 94001-080-800S | Nut, hex., 8mm | 1.00 | 2 | |
|
94050-06080
|
Nut, flange 6mm | 1.00 | 4 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 5 | |
| 94101-06400 | Washer, plain 6mm | 1.00 | 2 | |
| 94102-08800 | Washer, plain 8mm | 1.00 | 2 | |
| 94111-08800 | Washer, spring 8mm | 1.00 | 2 | |
| 95002-412-5004 | Clamp, tube (d12.5) | 1.00 | 2 | |
| 95005-450-7012 | Tube, 4.5x70 | 1.00 | 1 | |
| 95701-060-2508 | Bolt, flange 6x25 | 1.00 | 2 | |
| 95701-060-4008 | Bolt, flange 6x40 | 1.00 | 2 | |
| 95701-080-2008 | Bolt, flange 8x20 | 1.00 | 2 | |
| 17510-PM4-000 | Tube, electronic air control valve inlet | Discontinued | 1 | |
| 9 | ||||
| 17105-P00-T01 | Gasket, intake manifold (ishino gasket) | Discontinued | 1 | |
| 17105-P00-T02 | Gasket, intake manifold (nippon leakless) | Discontinued | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
SIR
Drive
FF
Transmission
AT
MT
Fuel
Gasoline
Engine
B16A
Volume
1.60
Frame
E-EG9
Produсtion years
1991
1992
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 06164-P06-A00 | Packing set, injector | Discontinued | 4 | |
| 16472-PD6-000 | Seal ring, injector | 3.60 | 4 | |
|
16473-PD6-000
|
Cushion ring, injector | 2.88 | 4 | |
| 16620-P30-000 | Pipe assy., fuel | Discontinued | 1 | |
| 16638-PH3-S00 | Insulator, fuel pipe | 1.55 | 3 | |
| 16740-P05-A00 | Regulator assy., pressure | Discontinued | 1 | |
| 16741-PG7-005 | O-ring, pressure regulator | 1.15 | 1 | |
| 17100-P30-000 | - | 253.80 | 1 | |
|
17105-P30-004
|
Gasket, intake manifold (nippon leakless) | 8.31 | 1 | |
| 17132-P30-000 | Stay comp., intake manifold | 35.14 | 1 | |
| 19509-PR3-003 | Clamp, electronic air control valve | Discontinued | 1 | |
| 32754-P30-000 | Stay d, engine wire harness | Discontinued | 1 | |
| 37880-P05-A00 | Sensor assy., air temp | 17.29 | 1 | |
| 90033-PR3-000 | Bolt, intake manifold stay | Discontinued | 2 | |
| 91301-PD6-003 | O-ring, 7.3x2.2 | 2.38 | 4 | |
| 91303-PK2-005 | O-ring 7.5x1.5 | 1.00 | 1 | |
| 92900-060-181B | Bolt, stud 6x18 | 1.00 | 2 | |
| 92900-060-280B | Bolt, stud 6x28 | 1.00 | 3 | |
| 92900-080-351B | Bolt, stud 8x35 | 1.00 | 4 | |
| 93404-080-2008 | Bolt-washer, 8x20 | 1.00 | 2 | |
| 93406-080-1608 | Bolt-washer, 8x16 | 1.00 | 1 | |
| 93893-050-1608 | Screw-washer, 5x16 | 1.00 | 2 | |
|
94050-06080
|
Nut, flange 6mm | 1.00 | 3 | |
| 94050-08080 | Nut, flange 8mm | 1.00 | 10 | |
|
95701-060-1408
|
Bolt, flange 6x14 | 1.00 | 2 |
