Number | Name | Price from, USD | Required |
---|
44014-SAB-N01 | Drive joint | 208.73 | 1 | |
44014-SAB-N21 | Joint set, outboard | 43.92 | 1 | |
44017-SAB-N00 | Boot set, inboard | 43.48 | 1 | |
44017-S5A-000 | Boot set, inboard | 44.57 | 1 | |
44018-SAB-N01 | Boot set, outboard | 47.63 | 1 | |
44018-SAB-N20 | Boot set, outboard | 44.15 | 1 | |
44305-SAB-N10 | Drive joint assy | 531.75 | 1 | |
44306-SAB-N00 | - | 545.05 | 1 | |
44310-SAB-900 | Joint comp., inboard | 254.28 | 1 | |
44310-S5A-300 | Joint comp., inboard | 72.49 | 1 | |
44319-SE0-000 | Set ring, 28x2.0 | 1.00 | 1 | |
44319-S04-300 | Set ring, 26x1.8 | 1.00 | 1 | |
44327-SV4-305 | Band, joint boot (double rolled band) | 4.16 | 2 | |
44329-SV4-305 | Band, shaft boot (double rolled band) | 3.23 | 4 | |
44337-S04-300 | Ring b, stopper | 1.28 | 2 | |
44338-S04-300 | Circlip, 23mm | 1.28 | 2 | |
44351-S2T-003 | - | 17.64 | 1 | |
44351-S04-911 | Damper, dynamic | 18.72 | 1 | |
44500-SAB-J00 | Shaft assy half | 195.47 | 1 | |
90102-SF1-000 | Bolt, hex., 10x1.25 | 1.92 | 3 | |
90305-692-010 | Nut, spindle (22mm) | 3.57 | 2 | |
90681-SR3-000 | Circlip, external, 33mm | 1.45 | 1 | |
91057-SR3-008 | Bearing, half shaft | 8.41 | 1 | |
91260-S0A-003 | Seal, half shaft outer | 4.85 | 1 | |
94520-55000 | Circlip, internal, 55mm | 1.00 | 1 | |
14 | ||||
44327-S04-N01 | Band b, driveshaft (nippon hatsujo) | 4.06 | 2 | |
44327-S04-N02 | Band b, driveshaft (oetiker limited) | 4.06 | 2 | |
16 | ||||
44329-S04-N01 | Band c, driveshaft (nippon hatsujo) | 3.98 | 2 | |
44329-S04-N02 | Band c, driveshaft (oetiker limited) | 3.98 | 2 |