Clutch & band servo (unit) for Nissan Avenir 1 generation 05.1990 - 01.1999
-
Grade
-
Drive
-
Fuel
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LX
LXG
VX
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
GA16DS
Volume
1.60
Frame
R-VEW10
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.16 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31527-31X07 | Seal, ring over drive servo piston; Seal-lathe cut ring | 2.31 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
| 31605-31X04 | Spring, servo | 1.00 | 1 | |
| 31605-31X07 | Spring, accumulator | 2.16 | 1 | |
| 31611-31X02 | Retainer, servo piston | 24.67 | 1 | |
| 31615-31X02 | Piston, band servo | 19.08 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31630-31X00 | Band assembly, brake | 47.04 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.59 | 1 | |
| 31691-31X00 | Retainer, servo piston | 25.79 | 1 | |
| 31695-31X00 | Piston, over drive servo; Piston-overdrive servo | 8.20 | 1 | |
| seal, race cut ring | ||||
| 31527-31X12 | Seal, race cut ring; Seal-lathe cut ring | 2.39 | 1 | |
| 31527-31X64 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| seal, race cut ring | ||||
| 31527-31X13 | Seal, race cut ring; Seal-lathe cut ring | 2.39 | 1 | |
| 31527-31X65 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LX
LXG
VX
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
GA16DS
Volume
1.60
Frame
T-VEW10
Produсtion years
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31630-31X00 | Band assembly, brake | 47.04 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31611-31X02 | Retainer, servo piston | 24.67 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31527-31X07 | Seal, ring over drive servo piston; Seal-lathe cut ring | 2.31 | 1 | |
| 31695-31X00 | Piston, over drive servo; Piston-overdrive servo | 8.20 | 1 | |
| 31615-31X02 | Piston, band servo | 19.08 | 1 | |
| 31527-31X64 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| 31527-31X65 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31605-31X07 | Spring, accumulator | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.16 | 1 | |
| 31691-31X00 | Retainer, servo piston | 25.79 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.59 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| spring, servo | ||||
| 31605-31X04 | Spring, servo | 1.00 | 1 | |
| 31605-31X09 | Spring, accumulator | 1.00 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LXG
VX
Drive
FF
Transmission
AT
Fuel
Diesel
Gasoline
Engine
CD20
GA16DS
Volume
1.60
2.00
Frame
GA-VEW10
KB-VSW10
Produсtion years
1995
1996
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LX
LXG
VX
Drive
FF
Transmission
AT
Fuel
Diesel
Engine
CD20
Volume
2.00
Frame
S-VSW10
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.16 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31527-31X07 | Seal, ring over drive servo piston; Seal-lathe cut ring | 2.31 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
| 31605-31X04 | Spring, servo | 1.00 | 1 | |
| 31605-31X07 | Spring, accumulator | 2.16 | 1 | |
| 31611-31X00 | Retainer, servo piston | 27.13 | 1 | |
| 31615-31X00 | Piston, band servo | 19.09 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31630-31X00 | Band assembly, brake | 47.04 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.59 | 1 | |
| 31691-31X00 | Retainer, servo piston | 25.79 | 1 | |
| 31695-31X00 | Piston, over drive servo; Piston-overdrive servo | 8.20 | 1 | |
| seal, race cut ring | ||||
| 31527-31X05 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| 31527-31X60 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| seal, race cut ring | ||||
| 31527-31X06 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| 31527-31X61 | Seal, race cut ring; Seal-lathe cut ring | 2.16 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LX
LXG
VX
Drive
FF
Transmission
AT
Fuel
Diesel
Engine
CD20
Volume
2.00
Frame
S-VSW10
Produсtion years
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31630-31X00 | Band assembly, brake | 47.04 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31611-31X00 | Retainer, servo piston | 27.13 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31527-31X07 | Seal, ring over drive servo piston; Seal-lathe cut ring | 2.31 | 1 | |
| 31695-31X00 | Piston, over drive servo; Piston-overdrive servo | 8.20 | 1 | |
| 31615-31X00 | Piston, band servo | 19.09 | 1 | |
| 31527-31X60 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| 31527-31X61 | Seal, race cut ring; Seal-lathe cut ring | 2.16 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31605-31X07 | Spring, accumulator | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.16 | 1 | |
| 31691-31X00 | Retainer, servo piston | 25.79 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.59 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| spring, servo | ||||
| 31605-31X04 | Spring, servo | 1.00 | 1 | |
| 31605-31X09 | Spring, accumulator | 1.00 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
BI
EI
SI
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
SR18Di
Volume
1.80
Frame
E-W10
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.16 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31527-31X14 | Seal, race cut ring; Seal, ring over drive servo piston | 2.09 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
| 31605-31X07 | Spring, accumulator | 2.16 | 1 | |
| 31605-31X09 | Spring, accumulator | 1.00 | 1 | |
| 31611-31X02 | Retainer, servo piston | 24.67 | 1 | |
| 31615-31X02 | Piston, band servo | 19.08 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31630-31X00 | Band assembly, brake | 47.04 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.59 | 1 | |
| 31691-31X01 | Retainer, servo piston | 25.79 | 1 | |
| 31695-31X01 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| seal, race cut ring | ||||
| 31527-31X12 | Seal, race cut ring; Seal-lathe cut ring | 2.39 | 1 | |
| 31527-31X64 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| seal, race cut ring | ||||
| 31527-31X13 | Seal, race cut ring; Seal-lathe cut ring | 2.39 | 1 | |
| 31527-31X65 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
2.0SI
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
SR20DE
Volume
2.00
Frame
E-PW10
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.16 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31527-80X12 | Seal, race cut ring; Seal-lathe cut ring | 2.16 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
| 31605-31X07 | Spring, accumulator | 2.16 | 1 | |
| 31605-31X09 | Spring, accumulator | 1.00 | 1 | |
| 31611-31X03 | Retainer, servo piston | 26.54 | 1 | |
| 31615-31X03 | Piston, band servo | 21.02 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31630-31X01 | Band assembly, brake | 47.04 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.59 | 1 | |
| 31691-31X03 | Retainer, servo piston | 25.79 | 1 | |
| 31695-31X03 | Piston, over drive servo; Piston-overdrive servo | 7.45 | 1 | |
| seal, race cut ring | ||||
| 31527-31X15 | Seal, race cut ring | 2.39 | 1 | |
| 31527-31X66 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| seal, race cut ring | ||||
| 31527-31X16 | Seal, race cut ring | 2.39 | 1 | |
| 31527-31X67 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
2.0SI
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
SR20DE
Volume
2.00
Frame
E-PNW10
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0092250500 | - | Not available | - | |
| 08911-1401A | Nut | 1.19 | - | |
| 31506-31X01 | Ring, snap | 1.26 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.16 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.16 | 1 | |
| 31526-31X09 | Seal,o ring | 2.09 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.14 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.13 | 1 | |
| 31527-80X12 | Seal, race cut ring; Seal-lathe cut ring | 2.16 | 1 | |
| 31605-31X00 | Spring, piston return | 2.16 | 1 | |
| 31605-31X01 | Spring, piston return | 1.27 | 1 | |
| 31605-31X09 | Spring, accumulator | 1.00 | 1 | |
| 31605-31X11 | Spring, servo | 2.09 | 1 | |
| 31611-31X03 | Retainer, servo piston | 26.54 | 1 | |
| 31615-31X03 | Piston, band servo | 21.02 | 1 | |
| 31618-31X00 | Stem, band servo piston | 4.62 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X00 | Retainer, return spring servo | 3.13 | 1 | |
| 31625-41X00 | Pin, anchor end | 2.16 | 1 | |
| 31626-21X00 | Washer, anchor end pin | 1.00 | 1 | |
| 31630-31X01 | Band assembly, brake | 47.04 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.45 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.19 | 1 | |
| 31675-31X04 | Piston, accumulator servo | 5.44 | 1 | |
| 31691-31X03 | Retainer, servo piston | 25.79 | 1 | |
| 31695-31X03 | Piston, over drive servo; Piston-overdrive servo | 7.45 | 1 | |
| seal, race cut ring | ||||
| 31527-31X15 | Seal, race cut ring | 2.39 | 1 | |
| 31527-31X66 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| seal, race cut ring | ||||
| 31527-31X16 | Seal, race cut ring | 2.39 | 1 | |
| 31527-31X67 | Seal, race cut ring; Seal-lathe cut ring | 2.46 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LX
LXG
VX
Drive
FF
Transmission
AT
Fuel
Diesel
Gasoline
Engine
CD20
GA16DS
Volume
1.60
2.00
Frame
R-VEW10
S-VSW10
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31505-31X02 | Spring, piston return | 3.21 | 16 | |
| 31505-31X03 | Spring, piston return | 3.21 | 16 | |
| 31506-31X03 | Ring, snap overrun clutch | 1.26 | 1 | |
| 31506-31X04 | Ring, snap forward clutch | 1.00 | 1 | |
| 31506-31X05 | Ring, snap forward clutch | 2.75 | 1 | |
| 31506-31X06 | Ring, snap | 3.21 | 1 | |
| 31506-31X07 | Ring, snap | 1.00 | 1 | |
| 31506-31X08 | Ring, snap clutch drum | 3.21 | 1 | |
| 31506-31X09 | Ring, snap | 2.16 | 1 | |
| 31510-31X05 | Clutch assembly, reverse | 169.96 | 1 | |
| 31511-31X03 | Drum, reverse clutch | 82.00 | 1 | |
| 31514-31X01 | Piston assembly, clutch | 43.24 | 1 | |
| 31521-31X00 | Retainer, spring | 2.16 | 1 | |
| 31521-31X01 | Retainer, spring | 4.17 | 1 | |
| 31522-31X02 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 2.16 | 1 | |
| 31525-31X02 | Seal,o ring | 5.59 | 3 | |
| 31526-31X01 | Seal,o ring | 2.16 | 1 | |
| 31527-31X00 | Seal,???? cut ring; Seal-lathe cut ring | 2.16 | 1 | |
| 31527-31X01 | Seal,???? cut ring; Seal-lathe cut ring | 3.21 | 1 | |
| 31527-31X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.70 | 1 | |
| 31527-31X03 | Seal,???? cut ring; Seal-lathe cut ring | 4.70 | 1 | |
| 31528-21X10 | Seal, lip | 4.55 | 1 | |
| 31528-31X01 | Seal, lip | 5.59 | 1 | |
| 31528-31X02 | Seal, lip | 4.17 | 1 | |
| 31528-31X03 | Seal, lip | 4.17 | 1 | |
| 31532-31X00 | Plate assembly, drive | 9.17 | 2 | |
| 31532-31X01 | Plate assembly, drive | 6.49 | 3 | |
| 31532-31X02 | Plate | 13.49 | 5 | |
| 31532-31X03 | Plate | 14.83 | 3 | |
| 31535-31X01 | Plate, dished | 8.27 | 1 | |
| 31535-31X02 | Plate, dished | 10.06 | 1 | |
| 31535-31X03 | Plate, dished | 2.68 | 1 | |
| 31535-31X08 | Plate, dished | 6.19 | 2 | |
| 31536-31X01 | Plate, driven | 6.04 | 5 | |
| 31536-31X02 | Plate, driven forward clutch | 2.68 | 5 | |
| 31536-31X03 | Plate, driven overrun clutch | 2.68 | 5 | |
| 31536-31X05 | Plate, driven | 5.96 | 2 | |
| 31570-31X00 | Clutch | 229.60 | 1 | |
| 31571-31X00 | Drum assembly, forward clutch; Drum assembly-foward clutch | 156.54 | 1 | |
| 31575-31X00 | Piston, forward clutch; Piston-foward clutch | 12.60 | 1 | |
| 31584-31X00 | Piston assembly, overrun clutch | 12.82 | 1 | |
| plate, retaining | ||||
| 31537-31X00 | Plate, retaining | 9.17 | 1 | |
| 31537-31X01 | Plate, retaining | 9.17 | 1 | |
| 31537-31X02 | Plate, retaining | 9.17 | 1 | |
| 31537-31X03 | Plate, retaining | 9.17 | 1 | |
| 31537-31X04 | Plate, retaining | 9.17 | 1 | |
| plate, retaining | ||||
| 31537-31X10 | Plate, retaining | 9.02 | 1 | |
| 31537-31X11 | Plate, retaining | 9.17 | 1 | |
| 31537-31X12 | Plate, retaining | 9.17 | 1 | |
| 31537-31X13 | Plate, retaining | 9.17 | 1 | |
| 31537-31X14 | Plate, retaining | 9.17 | 1 | |
| 31537-31X15 | Plate, retaining | 9.17 | 1 | |
| piston assembly, high clutch | ||||
| 31544-31X01 | Piston assembly, high clutch | 17.97 | 1 | |
| 31544-31X03 | Piston assembly, high clutch | 18.34 | 1 | |
| high clutch & input shaft assembly | ||||
| 31410-31X03 | High clutch & input shaft assembly | 182.63 | 1 | |
| 31410-31X18 | High clutch & input shaft assembly | 182.63 | 1 | |
| 31410-31X64 | High clutch & input shaft assembly | 182.63 | 1 | |
| plate, retaining | ||||
| 31537-31X60 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X61 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X62 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X63 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X64 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X65 | Plate, retaining forward clutch | 11.85 | 1 | |
| high clutch drum & input shaft | ||||
| 31412-31X05 | High clutch drum & input shaft | 73.58 | 1 | |
| 31412-31X06 | High clutch drum & input shaft | 73.58 | 1 | |
| plate, retaining | ||||
| 31537-31X70 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X71 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X72 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X73 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X74 | Plate, retaining overrun clutch | 10.73 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
L
LX
LXG
VX
Drive
FF
Transmission
AT
Fuel
Diesel
Gasoline
Engine
CD20
GA16DS
Volume
1.60
2.00
Frame
S-VSW10
T-VEW10
Produсtion years
1993
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31536-31X01 | Plate, driven | 6.04 | 5 | |
| 31521-31X00 | Retainer, spring | 2.16 | 1 | |
| 31514-31X01 | Piston assembly, clutch | 43.24 | 1 | |
| 31527-31X00 | Seal,???? cut ring; Seal-lathe cut ring | 2.16 | 1 | |
| 31528-21X10 | Seal, lip | 4.55 | 1 | |
| 31511-31X03 | Drum, reverse clutch | 82.00 | 1 | |
| 31532-31X00 | Plate assembly, drive | 9.17 | 2 | |
| 31536-31X05 | Plate, driven | 5.96 | 2 | |
| 31535-31X08 | Plate, dished | 6.19 | 2 | |
| 31510-31X05 | Clutch assembly, reverse | 169.96 | 1 | |
| 31532-31X01 | Plate assembly, drive | 6.49 | 3 | |
| 31521-31X01 | Retainer, spring | 4.17 | 1 | |
| 31544-31X03 | Piston assembly, high clutch | 18.34 | 1 | |
| 31527-31X01 | Seal,???? cut ring; Seal-lathe cut ring | 3.21 | 1 | |
| 31527-31X03 | Seal,???? cut ring; Seal-lathe cut ring | 4.70 | 1 | |
| 31528-31X02 | Seal, lip | 4.17 | 1 | |
| 31575-31X00 | Piston, forward clutch; Piston-foward clutch | 12.60 | 1 | |
| 31527-31X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.70 | 1 | |
| 31584-31X00 | Piston assembly, overrun clutch | 12.82 | 1 | |
| 31522-31X02 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 2.16 | 1 | |
| 31536-31X03 | Plate, driven overrun clutch | 2.68 | 5 | |
| 31535-31X03 | Plate, dished | 2.68 | 1 | |
| 31532-31X03 | Plate | 14.83 | 3 | |
| 31506-31X05 | Ring, snap forward clutch | 2.75 | 1 | |
| 31506-31X04 | Ring, snap forward clutch | 1.00 | 1 | |
| 31525-31X02 | Seal,o ring | 5.59 | 3 | |
| 31526-31X01 | Seal,o ring | 2.16 | 1 | |
| 31410-31X64 | High clutch & input shaft assembly | 182.63 | 1 | |
| 31528-31X03 | Seal, lip | 4.17 | 1 | |
| 31536-31X02 | Plate, driven forward clutch | 2.68 | 5 | |
| 31412-31X06 | High clutch drum & input shaft | 73.58 | 1 | |
| 31535-31X02 | Plate, dished | 10.06 | 1 | |
| 31506-31X03 | Ring, snap overrun clutch | 1.26 | 1 | |
| 31506-31X09 | Ring, snap | 2.16 | 1 | |
| 31506-31X08 | Ring, snap clutch drum | 3.21 | 1 | |
| 31532-31X02 | Plate | 13.49 | 5 | |
| 31528-31X01 | Seal, lip | 5.59 | 1 | |
| 31505-31X02 | Spring, piston return | 3.21 | 16 | |
| 31505-31X03 | Spring, piston return | 3.21 | 16 | |
| ring, snap | ||||
| 31506-31X06 | Ring, snap | 3.21 | 1 | |
| 31506-31X07 | Ring, snap | 1.00 | 1 | |
| plate, retaining | ||||
| 31537-31X00 | Plate, retaining | 9.17 | 1 | |
| 31537-31X01 | Plate, retaining | 9.17 | 1 | |
| 31537-31X02 | Plate, retaining | 9.17 | 1 | |
| 31537-31X03 | Plate, retaining | 9.17 | 1 | |
| 31537-31X04 | Plate, retaining | 9.17 | 1 | |
| plate, retaining | ||||
| 31537-31X10 | Plate, retaining | 9.02 | 1 | |
| 31537-31X11 | Plate, retaining | 9.17 | 1 | |
| 31537-31X12 | Plate, retaining | 9.17 | 1 | |
| 31537-31X13 | Plate, retaining | 9.17 | 1 | |
| 31537-31X14 | Plate, retaining | 9.17 | 1 | |
| 31537-31X15 | Plate, retaining | 9.17 | 1 | |
| 31537-31X16 | Plate, retaining | 9.17 | 1 | |
| clutch assembly, forward | ||||
| 31570-31X00 | Clutch | 229.60 | 1 | |
| 31570-31X02 | Clutch | 225.13 | 1 | |
| drum assembly, forward clutch | ||||
| 31571-31X00 | Drum assembly, forward clutch; Drum assembly-foward clutch | 156.54 | 1 | |
| 31571-31X01 | Drum assembly, forward clutch; Drum assembly-foward clutch | 153.56 | 1 | |
| plate, retaining | ||||
| 31537-31X60 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X61 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X62 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X63 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X64 | Plate, retaining forward clutch | 11.85 | 1 | |
| 31537-31X65 | Plate, retaining forward clutch | 11.85 | 1 | |
| plate, retaining | ||||
| 31537-31X70 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X71 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X72 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X73 | Plate, retaining overrun clutch | 10.73 | 1 | |
| 31537-31X74 | Plate, retaining overrun clutch | 10.73 | 1 | |
| ring, snap | ||||
| 31506-31X06 | Ring, snap | 3.21 | 1 | |
| 31506-31X07 | Ring, snap | 1.00 | 1 | |