Cylinder block & oil pan (engine) for Nissan Bluebird U12, 8 generation 09.1987 - 08.1991
-
Grade
-
Drive
-
Transmission
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
LE
SES
XES
XESF
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
CA16S
Volume
1.60
Frame
E-U12
Produсtion years
1987
1988
1989
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-06E92 | Block assembly, cylinder | 1,056.53 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-16A04 | Plate, engine rear | 29.91 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| gauge, oil level | ||||
| 11140-71E00 | Gauge, oil level | 7.07 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
FES
LE
SES
XES
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
CA16S
Volume
1.60
Frame
E-U12
Produсtion years
1989
1990
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-06E92 | Block assembly, cylinder | 1,056.53 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
| 30411-16A04 | Plate, engine rear | 29.91 | 1 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| seal, oil crankshaft rear | ||||
| 12279-18V00 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| gasket, retainer | ||||
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 12298-D5700 | Gasket, retainer | 6.25 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
FES
LE
SES
XES
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
CA16S
Volume
1.60
Frame
E-U12
Produсtion years
1990
1991
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-06E92 | Block assembly, cylinder | 1,056.53 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-16A04 | Plate, engine rear | 29.91 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| seal, oil crankshaft rear | ||||
| 12279-18V00 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12279-53J10 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| gasket, retainer | ||||
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 12298-D5700 | Gasket, retainer | 6.25 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
SES
XES
XESF
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CA16S
Volume
1.60
Frame
E-U12
Produсtion years
1987
1988
1989
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-06E92 | Block assembly, cylinder | 1,056.53 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-16A13 | Plate, engine rear | 29.91 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| gauge, oil level | ||||
| 11140-71E00 | Gauge, oil level | 7.07 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
FES
SES
XES
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CA16S
Volume
1.60
Frame
E-U12
Produсtion years
1989
1990
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-06E92 | Block assembly, cylinder | 1,056.53 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-16A13 | Plate, engine rear | 29.91 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| seal, oil crankshaft rear | ||||
| 12279-18V00 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| gasket, retainer | ||||
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 12298-D5700 | Gasket, retainer | 6.25 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
FES
SES
XES
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CA16S
Volume
1.60
Frame
E-U12
Produсtion years
1990
1991
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-06E92 | Block assembly, cylinder | 1,056.53 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-16A13 | Plate, engine rear | 29.91 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| seal, oil crankshaft rear | ||||
| 12279-18V00 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12279-53J10 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| gasket, retainer | ||||
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 12298-D5700 | Gasket, retainer | 6.25 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
S/SEL
SES
XES
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
CA18i
Volume
1.80
Frame
E-RU12
Produсtion years
1987
1988
1989
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-01E93 | Block assembly, cylinder | 952.37 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-16A04 | Plate, engine rear | 29.91 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| gauge, oil level | ||||
| 11140-71E00 | Gauge, oil level | 7.07 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
S/SEL
SES
XES
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CA18i
Volume
1.80
Frame
E-RU12
Produсtion years
1987
1988
1989
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-01E93 | Block assembly, cylinder | 952.37 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-01E01 | Pan assembly, oil | 127.97 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-03E11 | Plate, engine rear | 35.79 | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| gauge, oil level | ||||
| 11140-71E00 | Gauge, oil level | 7.07 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
SESA
XESA
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
CA18i
Volume
1.80
Frame
E-RNU12
Produсtion years
1987
1988
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-01E93 | Block assembly, cylinder | 952.37 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-51E10 | Pan assembly, oil | 133.93 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-56E00 | Plate, engine rear | Discontinued | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| gauge, oil level | ||||
| 11140-71E00 | Gauge, oil level | 7.07 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
SESA
XESA
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
CA18i
Volume
1.80
Frame
E-RNU12
Produсtion years
1988
1989
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00933-1301A | Plug, welch | 1.00 | - | |
| 08120-61010 | Bolt | 1.00 | - | |
| 08120-61028 | Bolt | 1.19 | - | |
| 08120-61628 | Bolt | 1.00 | - | |
| 08226-61410 | Bolt, double sided | 1.00 | - | |
| 08227-02810 | Bolt, double sided | 7.66 | - | |
| 08915-13610 | - | 1.26 | - | |
| 08918-10610 | Nut | 1.00 | - | |
| 08931-3021A | Plug-taper | 1.00 | - | |
| 08931-3061A | Bolt | 1.63 | - | |
| 11010-01E93 | Block assembly, cylinder | 952.37 | 1 | |
| 11022-21000 | Dowel, block to transmission | 1.00 | 2 | |
|
11024-K0100
|
Plug, taper | 1.63 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 11038-D0101 | Plate, baffle crank case | 12.13 | 1 | |
| 11046-73402 | Dowel, water pump | 1.00 | 4 | |
| 11047-21000 | Jet, oil cam bracket | 1.00 | 1 | |
| 11053-16A00 | Dowel, block to head; Pin-cylinder block | 1.63 | 2 | |
| 11110-51E10 | Pan assembly, oil | 133.93 | 1 | |
| 11121-01F10 | Seal, oil pan front | 3.97 | 1 | |
| 11121-01F15 | Seal, oil pan rear | 3.63 | 1 | |
| 11128-01M00 | Plug, blind | 1.34 | 1 | |
| 11150-71E00 | Guide, oil level gauge | 15.77 | 1 | |
| 12279-D0100 | Seal, oil crankshaft rear | 10.42 | 1 | |
| 12293-D0100 | Bolt, main bearing cap | 1.64 | 10 | |
| 12297-D0100 | Retainer, oil seal rear | 16.37 | 1 | |
| 12298-D0100 | Gasket, retainer | 6.25 | 1 | |
| 13049-D0100 | Inlet, water; Pipe, suction water pump | 3.64 | 1 | |
| 30411-56E00 | Plate, engine rear | Discontinued | 1 | |
| KP510-00150 | Gasket, liquid | 16.37 | - | |
| gauge, oil level | ||||
| 11140-71E00 | Gauge, oil level | 7.07 | 1 | |
| 11140-71E01 | Gauge, oil level | 10.19 | 1 | |
| 11140-71E02 | Gauge, oil level | 10.19 | 1 | |