Rear brake (chassis) for Nissan Maxima J30, 3 generation 10.1988 - 07.1991
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
1/2/SESV
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
VG30E
Volume
3.00
Frame
E-J30
Produсtion years
1989
1990
1991
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 0813402510 | - | Not available | - | |
| 08184-0301A | Bolt | 1.00 | - | |
| 08915-14010 | Washer, lock | 1.00 | - | |
| 08915-24010 | Washer | 1.00 | - | |
| 08915-2401A | Washer | 1.00 | - | |
| 44059-N9501 | Screw, adjuster | 1.12 | 2 | |
| 44063-86E00 | Retainer | 7.82 | 2 | |
| 44081-35F00 | Cover, spring | 3.65 | 2 | |
| 44090-01P04 | Spring | 7.23 | 1 | |
| 44091-01P04 | Spring | 7.23 | 1 | |
| 44095-61E01 | Lever assembly,rh | 17.88 | 1 | |
| 44096-61E01 | Lever assembly,lh | 17.88 | 1 | |
| 44123-61E00 | Piston | 59.75 | 2 | |
| 44128-61E00 | Nut, adjuster | 10.06 | 2 | |
| 44130-P6500 | Bearing | 7.38 | 2 | |
| 44131-N9500 | Plate | 2.16 | 2 | |
| 44132-N9500 | Strut | 6.03 | 2 | |
| 44133-61E00 | Spacer, adjusting | 3.35 | 4 | |
| 44134-61E00 | Rod, push | 13.26 | 2 | |
| 44139-P6500 | Washer | 1.63 | 2 | |
|
44140-N9500
|
Pin | 4.54 | 4 | |
| 44141-N9500 | Bolt-pin | 2.43 | 4 | |
| 44146-N9500 | Seat, spring | 3.65 | 2 | |
| 44147-61E00 | Spring | 3.65 | 2 | |
| 44149-P6500 | Nut | 2.61 | 2 | |
| 44150-88E01 | Plate, baffle | 15.12 | 1 | |
| 44160-88E01 | Plate, baffle | 15.12 | 1 | |
| 44195-61E01 | Guide, adjust cable rh | 22.20 | 1 | |
| 44196-61E01 | Guide, adjust cable lh | 22.20 | 1 | |
| 44252-01P04 | Bolt | 3.65 | 2 | |
|
AY620-NS004
|
Seal kit, disc brake | 20.14 | 1 | |
| screw, bleeder | ||||
| 41128-88E01 | Screw, bleeder | 4.10 | 2 | |
| 41128-V5510 | - | Out of stock | 2 | |
| caliper assembly, rear RH without pad or shim | ||||
| 44001-61E00 | Caliper assembly, rear rh without pad or shim; Caliper assembly-rear rh,w/o pads or shims | 493.21 | 1 | |
| 44001-61E01 | Caliper assembly, rear rh without pad or shim; Caliper assembly-rear rh,w/o pads or shims | 493.21 | 1 | |
| caliper assembly, rear LH without pad or shim | ||||
| 44011-61E00 | Caliper assembly, rear lh without pad or shim; Caliper assembly-rear lh,w/o pads or shims | 493.21 | 1 | |
| 44011-61E01 | Caliper assembly, rear lh without pad or shim; Caliper assembly-rear lh,w/o pads or shims | 493.21 | 1 | |
| hardware kit, rear disc brake pad | ||||
| 44080-65E25 | Hardware kit, rear disc brake pad | 37.48 | 1 | |
| 44080-86E25 | Hardware kit, rear disc brake pad | 54.46 | 1 | |
| pad kit, disc brake | ||||
| 44060-86E90 | Pad kit, disc brake | 43.65 | 1 | |
| AY060-NS903 | Pad kit, disc brake | 75.25 | 1 | |
| adapter, caliper | ||||
| 44155-88E00 | Adapter, caliper | 35.76 | 1 | |
| 44165-88E00 | Adapter, caliper | 35.76 | 1 | |
| cam, adjusting rear brake | ||||
| 44142-44B00 | Cam, adjusting rear brake; Cam, adjusting rear brake rh | 19.74 | 1 | |
| 44142-N9502 | Cam, adjusting rear brake; Cam-adjusting,rear brake rh | 19.74 | 1 | |
| cam, adjusting rear brake | ||||
| 44143-44B00 | Cam, adjusting rear brake; Cam, adjusting rear brake lh | 19.74 | 1 | |
| 44143-N9502 | Cam, adjusting rear brake; Cam-adjusting,rear brake lh | 19.74 | 1 | |
