Transfer case & extension housing for Toyota Caldina T210, 2 generation 09.1997 - 12.1999
-
Grade
-
Transmission
-
Fuel
-
Engine
-
Volume
-
Frame
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
E
G
Drive
4WD
Transmission
AT
MT
Fuel
Gasoline
Engine
3S-FE
Volume
2.00
Frame
E-ST215G
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 36103-21010 | Case sub-assy, transfer | 292.45 | 1 | |
| 36109-33010 | Housing sub-assy, transfer extension | 83.68 | 1 | |
| 36118-21010 | Plate, transfer stiffener, rh | 56.94 | 1 | |
| 36119-21010 | Plate, transfer stiffener, center | 62.98 | 1 | |
| 36121-33010 | Cover, transfer case, no.1 | 66.43 | 1 | |
| 41114-16010 | Bolt, differential bearing cap | 1.98 | 2 | |
| 90105-08351 | Bolt | 1.04 | 8 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
|
90311-36006
|
Seal, oil (for transfer case rh) | 3.55 | 1 | |
| 90311-38062 | Seal, type t oil (for transfer extension housing) | 2.06 | 1 | |
|
90311-49001
|
Seal, oil (for transfer case) | 1.78 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18045 | Plug | 2.67 | 1 | |
|
90341-18057
|
Plug | 3.02 | 1 | |
| 90930-03133 | Plug, breather | 3.19 | 1 | |
| 90999-73105 | Bush | 3.19 | 1 | |
| 91511-80835 | Bolt (for head to camshaft bearing cap) | 1.00 | - | |
| 91512-61020 | - | 1.12 | - | |
| 91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
| 91512-61045 | Bolt | 1.21 | - | |
| 91513-B1045 | - | 1.64 | - | |
| WASHER, TRANSFER OUTPUT SHAFT | ||||
| 36275-33010 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33020 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33030 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33040 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33050 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33060 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33070 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33080 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33090 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33100 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33110 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33120 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33130 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33140 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33150 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33160 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33170 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33180 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33190 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33200 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33210 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33220 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33230 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33240 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33250 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33260 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33270 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33280 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33290 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33300 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33310 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33320 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33330 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33340 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33350 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33360 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33370 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33380 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33390 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33400 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33410 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33420 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33430 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33440 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33450 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33460 | Washer, transfer output shaft | 3.02 | 1 | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12028 | Bolt, stud (for transfer & transaxle setting) | 3.54 | 1 | |
| 90116-12034 | Bolt, stud | 1.64 | 1 | |
| 90116-12041 | Bolt, stud (for transfer & transaxle setting) | 2.07 | 4 | |
| DAMPER, TRANSFER DYNAMIC | ||||
| 33183-21020 | Damper, transfer dynamic | 69.88 | 1 | |
| 33183-21030 | Damper, transfer dynamic | 47.45 | 1 | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-08030 | Pin | 1.55 | 2 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| DEFLECTOR, TRANSFER EXTENSION HOUSING DUST | ||||
| 33146-30010 | Deflector, extension housing dust | 8.55 | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| Subschemes | ||||
| TRANSFER GEAR | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
3S-GE
Volume
2.00
Frame
E-ST215G
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 33183-21040 | Damper, transfer dynamic | 69.01 | 1 | |
| 36103-21010 | Case sub-assy, transfer | 292.45 | 1 | |
| 36109-33010 | Housing sub-assy, transfer extension | 83.68 | 1 | |
| 36118-21010 | Plate, transfer stiffener, rh | 56.94 | 1 | |
| 36119-21010 | Plate, transfer stiffener, center | 62.98 | 1 | |
| 36121-33010 | Cover, transfer case, no.1 | 66.43 | 1 | |
| 41114-16010 | Bolt, differential bearing cap | 1.98 | 2 | |
| 90105-08351 | Bolt | 1.04 | 8 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
|
90311-36006
|
Seal, oil (for transfer case rh) | 3.55 | 1 | |
| 90311-38062 | Seal, type t oil (for transfer extension housing) | 2.06 | 1 | |
|
90311-49001
|
Seal, oil (for transfer case) | 1.78 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18045 | Plug | 2.67 | 1 | |
|
90341-18057
|
Plug | 3.02 | 1 | |
| 90930-03133 | Plug, breather | 3.19 | 1 | |
| 90999-73105 | Bush | 3.19 | 1 | |
| 91511-80835 | Bolt (for head to camshaft bearing cap) | 1.00 | - | |
| 91512-61020 | - | 1.12 | - | |
| 91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
| 91512-61045 | Bolt | 1.21 | - | |
| 91513-B1045 | - | 1.64 | - | |
| WASHER, TRANSFER OUTPUT SHAFT | ||||
| 36275-33010 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33020 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33030 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33040 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33050 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33060 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33070 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33080 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33090 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33100 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33110 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33120 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33130 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33140 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33150 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33160 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33170 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33180 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33190 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33200 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33210 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33220 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33230 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33240 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33250 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33260 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33270 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33280 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33290 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33300 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33310 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33320 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33330 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33340 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33350 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33360 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33370 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33380 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33390 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33400 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33410 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33420 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33430 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33440 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33450 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33460 | Washer, transfer output shaft | 3.02 | 1 | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12028 | Bolt, stud (for transfer & transaxle setting) | 3.54 | 1 | |
| 90116-12034 | Bolt, stud | 1.64 | 1 | |
| 90116-12041 | Bolt, stud (for transfer & transaxle setting) | 2.07 | 4 | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-08030 | Pin | 1.55 | 2 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| DEFLECTOR, TRANSFER EXTENSION HOUSING DUST | ||||
| 33146-30010 | Deflector, extension housing dust | 8.55 | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| Subschemes | ||||
| TRANSFER GEAR | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
E
Drive
4WD
Transmission
AT
Fuel
Diesel
Engine
3C-TE
Volume
2.20
Frame
KH-CT216G
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 36103-21010 | Case sub-assy, transfer | 292.45 | 1 | |
| 36109-33010 | Housing sub-assy, transfer extension | 83.68 | 1 | |
| 36118-21030 | Plate, transfer stiffener, rh | 67.29 | 1 | |
| 36121-33010 | Cover, transfer case, no.1 | 66.43 | 1 | |
| 41114-16010 | Bolt, differential bearing cap | 1.98 | 2 | |
| 90105-08351 | Bolt | 1.04 | 8 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
|
90311-36006
|
Seal, oil (for transfer case rh) | 3.55 | 1 | |
| 90311-38062 | Seal, type t oil (for transfer extension housing) | 2.06 | 1 | |
|
90311-49001
|
Seal, oil (for transfer case) | 1.78 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18045 | Plug | 2.67 | 1 | |
|
90341-18057
|
Plug | 3.02 | 1 | |
| 90930-03133 | Plug, breather | 3.19 | 1 | |
| 90999-73105 | Bush | 3.19 | 1 | |
| 91511-80835 | Bolt (for head to camshaft bearing cap) | 1.00 | - | |
| 91512-61020 | - | 1.12 | - | |
| 91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
| 91512-61045 | Bolt | 1.21 | - | |
| 91513-B1045 | - | 1.64 | - | |
| 33183-21020 | Damper, transfer dynamic | 69.88 | 1 | |
| WASHER, TRANSFER OUTPUT SHAFT | ||||
| 36275-33010 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33020 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33030 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33040 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33050 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33060 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33070 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33080 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33090 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33100 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33110 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33120 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33130 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33140 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33150 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33160 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33170 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33180 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33190 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33200 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33210 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33220 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33230 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33240 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33250 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33260 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33270 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33280 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33290 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33300 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33310 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33320 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33330 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33340 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33350 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33360 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33370 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33380 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33390 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33400 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33410 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33420 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33430 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33440 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-33450 | Washer, transfer output shaft | 2.07 | 1 | |
| 36275-33460 | Washer, transfer output shaft | 3.02 | 1 | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12028 | Bolt, stud (for transfer & transaxle setting) | 3.54 | 1 | |
| 90116-12034 | Bolt, stud | 1.64 | 1 | |
| 90116-12041 | Bolt, stud (for transfer & transaxle setting) | 2.07 | 4 | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-08030 | Pin | 1.55 | 2 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| DEFLECTOR, TRANSFER EXTENSION HOUSING DUST | ||||
| 33146-30010 | Deflector, extension housing dust | 8.55 | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| Subschemes | ||||
| TRANSFER GEAR | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GTT
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
3S-GTE
Volume
2.00
Frame
E-ST215W
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 33183-21050 | Damper, transfer dynamic | 69.88 | 1 | |
| 36102-21010 | Retainer sub-assy, transfer rh bearing | 95.76 | 1 | |
| 36109-33010 | Housing sub-assy, transfer extension | 83.68 | 1 | |
| 36118-21020 | Plate, transfer stiffener, rh | 69.01 | 1 | |
| 36119-21020 | Plate, transfer stiffener, center | 55.21 | 1 | |
| 36121-21020 | Cover, transfer case, no.1 | 69.88 | 1 | |
| 36128-21010 | Deflector, breather oil | 3.02 | 1 | |
| 90105-08179 | - | 1.29 | - | |
| 90105-08351 | Bolt | 1.04 | 8 | |
| 90105-12228 | Bolt | 1.00 | 2 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
| 90301-11018 | Ring, o (for transfer rh bearing retainer) | 2.50 | 1 | |
| 90301-70002 | Ring, o | 2.50 | 1 | |
|
90311-34021
|
Seal, oil | 1.63 | 1 | |
| 90311-38062 | Seal, type t oil (for transfer extension housing) | 2.06 | 1 | |
|
90311-58009
|
Seal, oil (for transfer case) | 2.98 | 1 | |
|
90316-37001
|
Seal, oil, no.2 (for transfer rh bearing retainer) | 2.01 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18045 | Plug | 2.67 | 1 | |
|
90341-18057
|
Plug | 3.02 | 1 | |
| 90930-03133 | Plug, breather | 3.19 | 1 | |
| 90999-73105 | Bush | 3.19 | 1 | |
| 91511-80840 | - | 1.07 | - | |
| 91512-61020 | - | 1.12 | - | |
| 91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
| 91512-G1040 | - | 1.81 | - | |
| 91621-60614 | Bolt | 1.04 | - | |
| WASHER, TRANSFER OUTPUT SHAFT | ||||
| 36275-21010 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21020 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21030 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21040 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21050 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21060 | Washer, transfer output shaft | Discontinued | 1 | |
| 36275-21070 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21080 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21090 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21100 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21110 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21120 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21130 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21140 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21150 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21160 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21170 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21180 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21190 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21200 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21210 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21220 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21230 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21240 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21250 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21260 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21270 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21280 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21290 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21300 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21310 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21320 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21330 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21340 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21350 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21360 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21370 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21380 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21390 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21400 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21410 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21420 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21430 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21440 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21450 | Washer, transfer output shaft | 3.02 | 1 | |
| 36275-21460 | Washer, transfer output shaft | 3.02 | 1 | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12033 | Bolt, stud (for transfer & transaxle setting) | 2.42 | 4 | |
| 90116-12034 | Bolt, stud | 1.64 | 2 | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-08030 | Pin | 1.55 | 2 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| CASE, TRANSFER | ||||
| 36111-21020 | Case, transfer | 251.04 | 1 | |
| 36111-21040 | Case, transfer | 251.04 | 1 | |
| DEFLECTOR, TRANSFER EXTENSION HOUSING DUST | ||||
| 33146-30010 | Deflector, extension housing dust | 8.55 | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| GASKET, TRANSFER COVER | ||||
| 36141-21010 | Gasket, transfer cover | 1.66 | 1 | |
| 36142-12010 | Gasket, transfer cover | 2.93 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GTT
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
3S-GTE
Volume
2.00
Frame
E-ST215W
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33183-21050 | Damper, transfer dynamic | 69.88 | 1 | |
| 36106-20010 | Cage sub-assy, transfer pinion bearing | 199.28 | 1 | |
| 36109-20012 | Housing sub-assy, transfer extension | 94.03 | 1 | |
| 36113-20020 | Case, transfer, rh | 380.44 | 1 | |
| 36114-20050 | Case, transfer, lh | 295.90 | 1 | |
| 36118-20020 | Plate, transfer stiffener, rh | Discontinued | 1 | |
| 36119-20012 | Plate, transfer stiffener, center | Discontinued | 1 | |
| 36124-12010 | Cover, transfer inspection hole | 4.05 | 1 | |
| 36129-20010 | Tube, transfer oil | 12.08 | 1 | |
| 90105-08129 | - | 1.19 | - | |
| 90105-10174 | - | 1.90 | - | |
| 90105-10216 | Bolt (for transfer oil receiver no.1) | 1.04 | 4 | |
| 90105-12137 | Bolt (for transfer & transaxle setting) | Discontinued | 3 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-10016 | Nut | 1.00 | - | |
| 90301-63005 | Ring, o (for transfer extension housing) | 1.55 | 1 | |
| 90301-99049 | Ring, o (for transfer pinion bearing cage) | 3.02 | 1 | |
|
90311-38032
|
Seal, oil | 2.84 | 1 | |
| 90331-08002 | Plug, tight | 1.00 | 1 | |
| 90331-14004 | Pin, ring (for manual transmission case) | 2.93 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
| 90540-06027 | Cushion (for transfer oil tube) | Discontinued | 1 | |
| 90999-73105 | Bush | 3.19 | 1 | |
| 91511-61040 | Bolt, flange (for idler) | 1.29 | - | |
| 91512-61020 | - | 1.12 | - | |
| 91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
| 91611-60816 | Bolt | 1.00 | - | |
| 91611-60820 | Bolt | 1.08 | - | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12018 | Bolt, stud (for transfer & transaxle setting) | Discontinued | 3 | |
| 90116-12028 | Bolt, stud (for transfer & transaxle setting) | 3.54 | 2 | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90250-12005 | Pin, straight | 1.90 | 2 | |
| DEFLECTOR, TRANSFER EXTENSION HOUSING DUST | ||||
| 33146-30010 | Deflector, extension housing dust | 8.55 | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| Subschemes | ||||
| FRONT AXLE HOUSING & DIFFERENTIAL | ||||
| FRONT DRIVE SHAFT | ||||
