Cylinder block for Toyota Caldina T240, 3 generation, restyling 01.2005 - 05.2007
-
Grade
-
Drive
-
Engine
-
Volume
-
Frame
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
X
Z
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
1ZZ-FE
Volume
1.80
Frame
CBA-ZZT241W
Produсtion years
2005
2006
2007
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90105-10335 | Bolt | 1.50 | - | |
| 90119-06737 | Bolt | 1.06 | - | |
| 90119-06888 | Bolt | 1.00 | - | |
| 90910-02122 | Bolt (for crankshaft bearing cap set) | 2.11 | - | |
| 94150-80640 | Nut | 1.00 | - | |
| 11410-29135 | Block sub-assy, cylinder | 1,671.71 | 1 | |
| 90311-76001 | Seal, engine rear oil | 8.33 | 1 | |
| 11361-22021 | Cover, flywheel housing under | 5.43 | 1 | |
| 12101-22024 | Pan sub-assy, oil | 67.64 | 1 | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| 96721-19010 | Ring, o | 1.12 | 1 | |
| 11452-22030 | Guide, oil level gage | Discontinued | 1 | |
|
91511-K0840
|
Bolt | 1.05 | 10 | |
| 90910-09107 | Cock sub-assy, water drain (for cylinder block) | 2.27 | 1 | |
| 90910-09087 | Plug | 1.85 | 1 | |
| 90126-06010 | Bolt, stud (for oil pan) | 1.50 | 2 | |
|
90341-12012
|
Plug | 1.41 | 1 | |
| 90250-10113 | Pin, straight | 1.00 | 2 | |
|
90253-13017
|
Pin | 1.15 | 2 | |
| 90253-14003 | Pin | 1.00 | 1 | |
| 96741-19005 | Ring, o (for oil level gage) | 1.15 | 1 | |
| 90250-06003 | Pin, straight | 1.00 | 2 | |
| GAGE SUB-ASSY, OIL LEVEL | ||||
| 15301-22030 | Gage sub-assy, oil level | 8.04 | 1 | |
| 15301-22050 | Gage sub-assy, oil level | 8.04 | 1 | |
| Subschemes | ||||
| TIMING GEAR COVER & REAR END PLATE | ||||
| ENGINE OIL PUMP | ||||
| OIL FILTER | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
Z
ZT
Drive
4WD
FF
Transmission
AT
Fuel
Gasoline
Engine
1AZ-FSE
Volume
2.00
Frame
CBA-AZT241W
CBA-AZT246W
Produсtion years
2005
2006
2007
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90105-08439 | - | 1.50 | - | |
| 90119-06848 | Bolt | 1.00 | - | |
| 90126-06015 | Bolt, stud (for oil pan) | 1.00 | - | |
| 90179-06326 | Nut | 1.00 | - | |
| 90250-06003 | Pin, straight | 1.00 | - | |
| 90253-11004 | Pin, ring | 1.00 | - | |
| 90253-11005 | Pin, ring | 1.00 | - | |
| 91512-61030 | Bolt (for transaxle case upper cover) | 1.32 | - | |
| 91551-G0845 | Bolt | 1.00 | - | |
|
91631-G0614
|
Bolt, hood hinge | 1.00 | - | |
| 96761-24020 | Gasket | 1.57 | - | |
| 90250-08120 | Pin, straight | 1.00 | 2 | |
| 90253-14003 | Pin | 1.00 | 2 | |
| 90311-89003 | Seal, engine rear oil | Discontinued | 1 | |
| 11361-28010 | Cover, flywheel housing under | 3.67 | 1 | |
| 12101-28050 | Pan sub-assy, oil | 88.00 | 1 | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| 96721-19010 | Ring, o | 1.12 | 1 | |
|
90253-13017
|
Pin | 1.15 | 10 | |
| 90910-02124 | Bolt (for crankshaft bearing cap set) | 1.76 | 10 | |
| 90910-09120 | Cock assy, drain(for oil filter bracket); Cock sub-assy, water drain (for cylinder block) | 4.93 | 1 | |
| 90250-08074 | Pin, straight | 1.00 | 2 | |
| 90430-14011 | Gasket | 1.00 | 1 | |
| 90910-09087 | Plug | 1.85 | 1 | |
|
90341-12012
|
Plug | 1.41 | 1 | |
| 90250-10113 | Pin, straight | 1.00 | 2 | |
|
90345-52001
|
Cock sub-assy, water drain (for cylinder block) | 1.85 | 1 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.00 | 1 | |
|
15678-28010
|
Filter, oil control valve | 3.62 | 1 | |
| BLOCK SUB-ASSY, CYLINDER | ||||
| 11410-29195 | Block sub-assy, cylinder | 1,812.49 | 1 | |
| 11410-29245 | Block sub-assy, cylinder | 1,812.49 | 1 | |
| CRANKCASE ASSY, STIFFENING | ||||
| 11421-28020 | Crankcase assy, stiffening | 478.64 | 1 | |
| 11421-28031 | Crankcase assy, stiffening | 432.89 | 1 | |
| GAGE SUB-ASSY, OIL LEVEL | ||||
| 15301-28020 | Gage sub-assy, oil level | 8.13 | 1 | |
| 15301-28051 | Gage sub-assy, oil level | 9.41 | 1 | |
| GUIDE, OIL LEVEL GAGE | ||||
| 11452-28011 | Guide, oil level gage | 17.07 | 1 | |
| 11452-28040 | Guide, oil level gage | 15.13 | 1 | |
| Subschemes | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT4
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
3S-GTE
Volume
2.00
Frame
ABA-ST246W
Produсtion years
2005
2006
2007
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11401-80056 | Block sub-assy, cylinder | 1,759.70 | 1 | |
| 11452-88581 | Guide, oil level gage | Discontinued | 1 | |
| 11494-88570 | Plate, oil hole cover | Discontinued | 1 | |
| 12101-88581 | Pan sub-assy, oil | Discontinued | 1 | |
|
12102-88460
|
Pan sub-assy, oil, no.2 | 110.86 | 1 | |
| 12121-88563 | Plate, oil pan baffle, no.1 | 41.62 | 1 | |
| 15301-88581 | Gage sub-assy, oil level | Discontinued | 1 | |
|
15517-88380
|
Ring, o | 3.52 | 1 | |
| 15790-88462 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
| 90105-06202 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90105-10028 | Bolt (for crankshaft bearing cap set) | 1.94 | 10 | |
| 90110-06033 | Bolt | Discontinued | - | |
| 90116-06048 | Bolt, stud | 1.00 | 2 | |
| 90116-06079 | Bolt | 1.06 | - | |
| 90116-06127 | Bolt, stud | 1.00 | - | |
| 90116-10135 | - | 1.94 | - | |
| 90119-06624 | Bolt | 1.23 | - | |
| 90119-08B60 | Bolt | 1.00 | - | |
| 90179-06257 | Nut | 1.00 | - | |
|
90179-06299
|
Nut, wire adjusting | 1.00 | - | |
| 90250-06015 | Pin, straight | 1.00 | 2 | |
| 90250-10113 | Pin, straight | 1.00 | 2 | |
| 90253-13004 | Pin, ring | 1.94 | 2 | |
|
90253-13017
|
Pin | 1.15 | 2 | |
|
90341-12012
|
Plug | 1.41 | 1 | |
| 90344-53015 | Plug | 2.64 | 2 | |
|
90345-52001
|
Cock sub-assy, water drain (for cylinder block) | 1.85 | 1 | |
|
90401-19002
|
Bolt, union(for oil hole cover) | 6.33 | 1 | |
| 90405-10034 | Union (for oil level gage guide) | 3.17 | 1 | |
| 90406-14003 | Pipe, metal | 1.23 | - | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| 90430-20015 | Washer | 1.58 | - | |
| 90901-10004 | Bolt | 1.00 | - | |
|
90950-01809
|
Cover, flywheel housing under | 4.22 | 1 | |
| 91513-K0620 | Bolt | 1.00 | - | |
| 91513-K0825 | Bolt | 1.06 | - | |
| 91641-80612 | Bolt | 1.00 | - | |
| 91643-H0822 | Bolt | 1.14 | - | |
|
96411-43500
|
Plug | 2.11 | 8 | |
| 96411-44000 | Plug | 2.46 | 1 | |
| 96741-19010 | Ring, o | 1.57 | - | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| ENGINE OIL PUMP | ||||
