Number | Name | Price from, USD | Required |
---|
11448-64010 | Orifice, cylinder block oil | 1.76 | 1 | |
11452-64050 | Guide, oil level gage | 15.72 | 1 | |
12101-64120 | Pan sub-assy, oil | Discontinued | 1 | |
12112-64070 | Pan, oil no.2 | 237.16 | 1 | |
12180-55010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.54 | 1 | |
12272-64010 | Cap, oil separator | 29.16 | 1 | |
12273-64010 | Gasket, oil separator | Discontinued | 1 | |
15605-64020 | Valve sub-assy, oil check | Discontinued | 1 | |
15691-64040 | Gasket, oil | 1.28 | 1 | |
15790-64021 | Nozzle sub-assy, oil, no.1 | 11.51 | 4 | |
16353-64011 | Flange (for water by-pass) | 5.45 | 1 | |
90105-06190 | - | 1.00 | - | |
90105-08282 | - | 1.14 | - | |
90105-10343 | - | 1.93 | - | |
90116-06132 | Bolt, stud (for oil strainer) | 1.05 | - | |
90119-08949 | - | Discontinued | - | |
90119-08951 | - | 1.00 | - | |
90126-10016 | - | 2.99 | - | |
90179-06036 | Nut | 1.00 | - | |
90179-08121 | - | 1.14 | - | |
90179-10016 | Nut | 1.00 | - | |
90201-14099 | Gasket(for vacuum pump union) | 2.02 | - | |
90249-17002 | Plug, tight, no.6 (for cylinder block) | Discontinued | 2 | |
90250-06068 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11021 | Pin, ring | 1.03 | 2 | |
90253-14002 | Pin, straight (for cylinder head set) | Discontinued | 2 | |
90339-11002 | Plug | 1.84 | - | |
90341-10002 | Plug, taper screw(for oil filter bracket); Plug, w/head straight screw no.1 (for cylinder block); Plug, w/head straight screw, no.2(for transaxle hsg & case); Plug, w/head straight screw, no.3(for transaxle hsg & case); Plug, w/head straight screw, no.5 | 1.76 | 1 | |
90341-12026 | Plug | 2.89 | 1 | |
90341-18006 | Plug | 1.58 | 2 | |
90341-22001 | Plug | Discontinued | 1 | |
90345-52003 | Cock sub-assy, water drain (for cylinder block) | 1.84 | 1 | |
90401-14033 | Bolt, union | Discontinued | - | |
90405-10039 | - | 4.92 | - | |
90405-20005 | Pipe, metal | 4.22 | - | |
90430-08033 | Gasket | 1.00 | - | |
90430-10027 | Gasket | 1.00 | - | |
90430-11001 | Gasket | 1.00 | - | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-14235 | Gasket | 2.02 | - | |
90430-18001 | Gasket (for manifold plug) | 1.50 | 2 | |
90430-22003 | Gasket | 1.01 | 1 | |
90430-37140 | Gasket(for oil filler cap) | 1.00 | 1 | |
90910-02061 | Bolt | 1.84 | 10 | |
90919-05014 | Sensor, crank position | Discontinued | 1 | |
91621-60614 | Bolt | 1.05 | - | |
91645-80620 | - | 1.00 | - | |
92122-60814 | Bolt, double sided | 1.00 | - | |
92122-61025 | Bolt, stud (for manifold to cylinder head) | 2.02 | - | |
96132-31000 | Clip | 1.00 | - | |
96411-41800 | Plug | 1.00 | 1 | |
96411-43000 | Plug | 1.76 | 4 | |
96411-43500 | Plug | 2.11 | 4 | |
96741-19010 | Ring, o | 1.57 | - | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-69555 | Block sub-assy, cylinder | 2,213.51 | 1 | |
11401-69556 | Block sub-assy, cylinder | 2,222.29 | 1 | |
11401-69645 | Block sub-assy, cylinder | 2,433.10 | 1 | |
11401-69646 | Block sub-assy, cylinder | 2,433.10 | 1 | |
11401-69647 | Block sub-assy, cylinder | 2,433.10 | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-64060 | Gage sub-assy, oil level | Discontinued | 1 | |
15301-64080 | Gage sub-assy, oil level | Discontinued | 1 | |
CRANKCASE SUB-ASSY | ||||
11402-64011 | Crankcase sub-assy | 315.34 | 1 | |
11402-64020 | Crankcase sub-assy | 173.92 | 1 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP | ||||
WATER PUMP | ||||
MANIFOLD | ||||
SWITCH & RELAY & COMPUTER |
Number | Name | Price from, USD | Required |
---|
11402-64020 | Crankcase sub-assy | 173.92 | 1 | |
11448-64010 | Orifice, cylinder block oil | 1.76 | 1 | |
11452-64050 | Guide, oil level gage | 15.72 | 1 | |
12101-64120 | Pan sub-assy, oil | Discontinued | 1 | |
12112-64070 | Pan, oil no.2 | 237.16 | 1 | |
12180-55010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.54 | 1 | |
12272-64010 | Cap, oil separator | 29.16 | 1 | |
12273-64010 | Gasket, oil separator | Discontinued | 1 | |
15301-64080 | Gage sub-assy, oil level | Discontinued | 1 | |
15605-64020 | Valve sub-assy, oil check | Discontinued | 1 | |
15691-64040 | Gasket, oil | 1.28 | 1 | |
15790-64021 | Nozzle sub-assy, oil, no.1 | 11.51 | 4 | |
16353-64011 | Flange (for water by-pass) | 5.45 | 1 | |
90105-06190 | - | 1.00 | - | |
90105-08282 | - | 1.14 | - | |
90105-10343 | - | 1.93 | - | |
90116-06132 | Bolt, stud (for oil strainer) | 1.05 | - | |
90119-08949 | - | Discontinued | - | |
90119-08951 | - | 1.00 | - | |
90126-10016 | - | 2.99 | - | |
90179-06036 | Nut | 1.00 | - | |
90179-08121 | - | 1.14 | - | |
90179-10016 | Nut | 1.00 | - | |
90201-14099 | Gasket(for vacuum pump union) | 2.02 | - | |
90249-17002 | Plug, tight, no.6 (for cylinder block) | Discontinued | 2 | |
90250-06068 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11021 | Pin, ring | 1.03 | 2 | |
90253-14002 | Pin, straight (for cylinder head set) | Discontinued | 2 | |
90339-11002 | Plug | 1.84 | - | |
90341-10002 | Plug, taper screw(for oil filter bracket); Plug, w/head straight screw no.1 (for cylinder block); Plug, w/head straight screw, no.2(for transaxle hsg & case); Plug, w/head straight screw, no.3(for transaxle hsg & case); Plug, w/head straight screw, no.5 | 1.76 | 1 | |
90341-12026 | Plug | 2.89 | 1 | |
90341-18006 | Plug | 1.58 | 2 | |
90341-22001 | Plug | Discontinued | 1 | |
90345-52003 | Cock sub-assy, water drain (for cylinder block) | 1.84 | 1 | |
90401-14033 | Bolt, union | Discontinued | - | |
90405-10039 | - | 4.92 | - | |
90405-20005 | Pipe, metal | 4.22 | - | |
90430-08033 | Gasket | 1.00 | - | |
90430-10027 | Gasket | 1.00 | - | |
90430-11001 | Gasket | 1.00 | - | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-14235 | Gasket | 2.02 | - | |
90430-18001 | Gasket (for manifold plug) | 1.50 | 2 | |
90430-22003 | Gasket | 1.01 | 1 | |
90430-37140 | Gasket(for oil filler cap) | 1.00 | 1 | |
90910-02061 | Bolt | 1.84 | 10 | |
90919-05014 | Sensor, crank position | Discontinued | 1 | |
91621-60614 | Bolt | 1.05 | - | |
91645-80620 | - | 1.00 | - | |
92122-60814 | Bolt, double sided | 1.00 | - | |
92122-61025 | Bolt, stud (for manifold to cylinder head) | 2.02 | - | |
96132-31000 | Clip | 1.00 | - | |
96411-41800 | Plug | 1.00 | 1 | |
96411-43000 | Plug | 1.76 | 4 | |
96411-43500 | Plug | 2.11 | 4 | |
96741-19010 | Ring, o | 1.57 | - | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-69556 | Block sub-assy, cylinder | 2,222.29 | 1 | |
11401-69645 | Block sub-assy, cylinder | 2,433.10 | 1 | |
11401-69646 | Block sub-assy, cylinder | 2,433.10 | 1 | |
11401-69647 | Block sub-assy, cylinder | 2,433.10 | 1 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP | ||||
WATER PUMP | ||||
MANIFOLD | ||||
SWITCH & RELAY & COMPUTER |
Number | Name | Price from, USD | Required |
---|
11401-79507 | Block sub-assy, cylinder | 1,774.32 | 1 | |
11402-76020 | Crankcase sub-assy | 120.34 | 1 | |
12101-76050 | Pan sub-assy, oil | 221.35 | 1 | |
12258-76010 | Pipe, oil return | 43.48 | 1 | |
12268-76010 | Hose, oil return | 13.53 | 1 | |
12269-76010 | Gasket, oil return pipe | 12.47 | 1 | |
12581-76010 | Insulator, cylinder block, no.1 | Discontinued | 1 | |
90116-08279 | Bolt, double sided | 1.00 | - | |
90116-08367 | Bolt, double sided | 1.23 | - | |
90119-06727 | Bolt | 1.05 | - | |
90119-08A14 | Bolt | 1.05 | - | |
90119-08A73 | - | 1.05 | - | |
90179-06045 | Nut | 1.05 | - | |
90179-08040 | Nut | 1.00 | - | |
90179-08146 | Nut (for transmission control cable) | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11005 | Pin, ring | 1.00 | 2 | |
90253-15016 | Pin | 1.00 | 2 | |
90341-12026 | Plug | 2.89 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-18023 | Gasket (for oil pan drain plug) | 1.00 | - | |
90467-34003 | Clip | 2.43 | 2 | |
90910-02092 | Bolt (for crankshaft bearing cap set) | 3.16 | - | |
90910-09087 | Plug | 2.02 | 1 | |
90910-09091 | Cock sub-assy, water drain (for cylinder block) | 5.45 | 1 | |
90977-02011 | Orifice, cylinder block oil | 1.00 | 1 | |
92112-60820 | Bolt, stud | 1.14 | - | |
92122-40610 | Bolt, stud(for manifold to carburetor) | 1.14 | - | |
96411-01800 | Plug, tight | 2.11 | 1 | |
96411-63000 | Plug, tight | 1.84 | 1 | |
96411-63500 | Plug, tight | 2.03 | 8 | |
96411-64000 | Plug, tight | 2.02 | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-76030 | Gage sub-assy, oil level | 7.03 | 1 | |
15301-76040 | Gage sub-assy, oil level | 7.03 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11409-76020 | Guide, oil level gage | 15.20 | 1 | |
11452-76020 | Guide, oil level gage | 10.54 | 1 | |
Subschemes | ||||
VENTILATION HOSE | ||||
CRANKSHAFT & PISTON |
Number | Name | Price from, USD | Required |
---|
11401-79507 | Block sub-assy, cylinder | 1,774.32 | 1 | |
11402-76020 | Crankcase sub-assy | 120.34 | 1 | |
12101-76050 | Pan sub-assy, oil | 221.35 | 1 | |
12268-76010 | Hose, oil return | 13.53 | 1 | |
12269-76010 | Gasket, oil return pipe | 12.47 | 1 | |
12581-76010 | Insulator, cylinder block, no.1 | Discontinued | 1 | |
90116-08279 | Bolt, double sided | 1.00 | - | |
90116-08367 | Bolt, double sided | 1.23 | - | |
90119-06727 | Bolt | 1.05 | - | |
90119-08A14 | Bolt | 1.05 | - | |
90119-08A73 | - | 1.05 | - | |
90179-06045 | Nut | 1.05 | - | |
90179-08040 | Nut | 1.00 | - | |
90179-08146 | Nut (for transmission control cable) | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11005 | Pin, ring | 1.00 | 2 | |
90253-15016 | Pin | 1.00 | 2 | |
90341-12026 | Plug | 2.89 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-18023 | Gasket (for oil pan drain plug) | 1.00 | - | |
90467-34003 | Clip | 2.43 | 2 | |
90910-02092 | Bolt (for crankshaft bearing cap set) | 3.16 | - | |
90910-09087 | Plug | 2.02 | 1 | |
90910-09091 | Cock sub-assy, water drain (for cylinder block) | 5.45 | 1 | |
90977-02011 | Orifice, cylinder block oil | 1.00 | 1 | |
92112-60820 | Bolt, stud | 1.14 | - | |
92122-40610 | Bolt, stud(for manifold to carburetor) | 1.14 | - | |
96411-01800 | Plug, tight | 2.11 | 1 | |
96411-63000 | Plug, tight | 1.84 | 1 | |
96411-63500 | Plug, tight | 2.03 | 8 | |
96411-64000 | Plug, tight | 2.02 | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-76030 | Gage sub-assy, oil level | 7.03 | 1 | |
15301-76040 | Gage sub-assy, oil level | 7.03 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11409-76020 | Guide, oil level gage | 15.20 | 1 | |
11452-76020 | Guide, oil level gage | 10.54 | 1 | |
PIPE, OIL RETURN | ||||
12258-76010 | Pipe, oil return | 43.48 | 1 | |
12258-76020 | Pipe, oil return | Discontinued | 1 | |
Subschemes | ||||
VENTILATION HOSE | ||||
CRANKSHAFT & PISTON |
Number | Name | Price from, USD | Required |
---|
11401-79507 | Block sub-assy, cylinder | 1,774.32 | 1 | |
11402-76020 | Crankcase sub-assy | 120.34 | 1 | |
12101-76050 | Pan sub-assy, oil | 221.35 | 1 | |
12268-76010 | Hose, oil return | 13.53 | 1 | |
12269-76010 | Gasket, oil return pipe | 12.47 | 1 | |
12581-76010 | Insulator, cylinder block, no.1 | Discontinued | 1 | |
15301-76030 | Gage sub-assy, oil level | 7.03 | 1 | |
90116-08279 | Bolt, double sided | 1.00 | - | |
90116-08367 | Bolt, double sided | 1.23 | - | |
90119-06727 | Bolt | 1.05 | - | |
90119-08A14 | Bolt | 1.05 | - | |
90119-08A73 | - | 1.05 | - | |
90179-06045 | Nut | 1.05 | - | |
90179-08040 | Nut | 1.00 | - | |
90179-08146 | Nut (for transmission control cable) | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11005 | Pin, ring | 1.00 | 2 | |
90253-15016 | Pin | 1.00 | 2 | |
90341-12026 | Plug | 2.89 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-18023 | Gasket (for oil pan drain plug) | 1.00 | - | |
90467-34003 | Clip | 2.43 | 2 | |
90910-02092 | Bolt (for crankshaft bearing cap set) | 3.16 | - | |
90910-09087 | Plug | 2.02 | 1 | |
90910-09091 | Cock sub-assy, water drain (for cylinder block) | 5.45 | 1 | |
90977-02011 | Orifice, cylinder block oil | 1.00 | 1 | |
92112-60820 | Bolt, stud | 1.14 | - | |
92122-40610 | Bolt, stud(for manifold to carburetor) | 1.14 | - | |
96411-01800 | Plug, tight | 2.11 | 1 | |
96411-63000 | Plug, tight | 1.84 | 1 | |
96411-63500 | Plug, tight | 2.03 | 8 | |
96411-64000 | Plug, tight | 2.02 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11409-76020 | Guide, oil level gage | 15.20 | 1 | |
11452-76020 | Guide, oil level gage | 10.54 | 1 | |
PIPE, OIL RETURN | ||||
12258-76010 | Pipe, oil return | 43.48 | 1 | |
12258-76020 | Pipe, oil return | Discontinued | 1 | |
Subschemes | ||||
VENTILATION HOSE | ||||
CRANKSHAFT & PISTON |