Cylinder head for Toyota Hilux Pick Up AN120, 8 generation 05.2015 - present
Scheme fits to:
Steering wheel
Left
Body style
Pickup
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
2GD-FTV
Volume
2.40
Frame
GUN125L
Produсtion years
2015
2016
2017
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 12601-0E010 | Cover sub-assy, engine, no.1 | 130.88 | 1 | |
| 12632-0E010 | Bracket, engine cover, no.2 | 9.75 | 1 | |
| 90105-T0052 | - | Out of stock | - | |
| 90105T0073 | - | Not available | - | |
| 90109-06384 | Bolt | 1.00 | - | |
| 90109-06385 | Bolt, v-bank cover; Bracket, v-bank cover, no.1; Bracket, v-bank cover, no.2; Joint, engine cover | 1.00 | - | |
| 90109-T0055 | - | Out of stock | - | |
| 90109-T0062 | - | Out of stock | - | |
| 90119T0219 | - | Not available | - | |
| 90119-T0238 | Bolt(for egr valve) | 1.00 | - | |
| 90119-T0260 | - | Out of stock | - | |
| 90119-T0342 | Bolt (for transmission control cable bracket) | Out of stock | - | |
| 90126-06030 | Bolt, double sided | 1.00 | - | |
| 90176-08058 | Nut | 1.00 | - | |
| 90178-T0018 | Nut, rear licence plate | 1.00 | - | |
| 90253-11021 | Pin, ring | 1.03 | 4 | |
|
91551-80625
|
Bolt | 1.00 | - | |
| 91552-81025 | Bolt | 1.00 | - | |
| 91671-80820 | Bolt | 1.00 | - | |
| 91671-80825 | Bolt | 1.00 | - | |
| 91671-80835 | Bolt, compressor | 1.00 | - | |
| 94151-80600 | Nut | 1.00 | - | |
|
90919-05060
|
Sensor, cam position; Sensor, cam position, lh; Sensor, cam position, rh; Sensor, camshaft position; Sensor, crank position, no.1; Sensor, crank position, no.2 | 36.28 | 1 | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90105-T0130 | - | Out of stock | 2 | |
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-T0551 | - | Out of stock | 16 | |
| 91551-80840 | Bolt | 1.00 | 2 | |
| GASKET, CYLINDER HEAD COVER | ||||
|
11213-0E010
|
Gasket, cylinder head cover | 13.91 | 1 | |
| 11213-11070 | Gasket, cylinder head cover | 8.87 | 1 | |
| CAP SUB-ASSY, OIL FILLER | ||||
| 12180-0H020 | Cap sub-assy, oil filler | 7.58 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.62 | 1 | |
| GASKET(FOR OIL FILLER CAP) | ||||
| 90080-43027 | Gasket (for oil filler cap) | 1.16 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
| HEAD SUB-ASSY, CYLINDER | ||||
| 11101-0E010 | - | Out of stock | 1 | |
| 11101-11160 | Head sub-assy, cylinder | 73.78 | 1 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| 11123-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| 11123-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| PLUG, W/HEAD STRAIGHT SCREW, NO.1 | ||||
| 90341-14015 | Plug | 1.05 | 4 | |
| 90341-T0005 | Plug, w/head straight screw, no.1 | 3.55 | 4 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-0E010 | - | Out of stock | 1 | |
| 12281-11050 | Hanger, engine, no.1 | 6.25 | 1 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-0E010-A0 | Gasket, cylinder head | 48.03 | 1 | |
| 11115-0E010-B0 | Gasket, cylinder head | 59.73 | 1 | |
| 11115-0E010-C0 | Gasket, cylinder head | 59.73 | 1 | |
| 11115-0E010-D0 | Gasket, cylinder head | 48.03 | 1 | |
| 11115-0E010-E0 | Gasket, cylinder head | 48.03 | 1 | |
| 11115-11110-A0 | Gasket, cylinder head | 55.47 | 1 | |
| 11115-11110-B0 | Gasket, cylinder head | 55.47 | 1 | |
| 11115-11110-C0 | Gasket, cylinder head | 59.73 | 1 | |
| 11115-11110-D0 | Gasket, cylinder head | 59.73 | 1 | |
| 11115-11110-E0 | Gasket, cylinder head | 59.73 | 1 | |
| HANGER, ENGINE, NO.2 | ||||
| 12282-0E010 | - | Out of stock | - | |
| 12282-11080 | Hanger, engine, no.2 | 24.68 | 1 | |
| COVER SUB-ASSY, CYLINDER HEAD | ||||
| 11201-0E010 | Cover sub-assy, cylinder head | 196.68 | 1 | |
| 11201-11080 | Cover sub-assy, cylinder head | 121.22 | 1 | |
| BOLT(FOR CYLINDER HEAD SET) | ||||
| 90910-02192 | Bolt(for cylinder head set) | 2.72 | 4 | |
| 90910-02193 | Bolt(for cylinder head set) | 3.78 | 6 | |
| 90910-T2010 | Bolt(for cylinder head set) | Out of stock | 6 | |
| 90910-T2011 | Bolt(for cylinder head set) | Out of stock | 4 | |
| GASKET, CYLINDER HEAD COVER, NO.2 | ||||
| 11214-0E010 | Gasket, cylinder head cover, no.2 | 4.07 | 1 | |
| 11214-11010 | Gasket, cylinder head cover, no.2 | 3.25 | 1 | |
| PIN, STRAIGHT | ||||
| 90250-05027 | Pin, straight | 1.00 | 2 | |
| 90250-T0011 | - | Out of stock | 2 | |
| BRACKET, ENGINE COVER | ||||
| 12631-0E010 | - | Out of stock | 1 | |
| 12631-11010 | Bracket, engine cover | 20.82 | 1 | |
| GASKET, CAMSHAFT BEARING CAP OIL HOLE | ||||
| 11159-0E010 | Gasket, camshaft bearing cap oil hole | 2.84 | 2 | |
| 11159-11010 | Gasket, camshaft bearing cap oil hole | 2.42 | 2 | |
| SPACER(FOR CYLINDER HEAD SET BOLT) | ||||
| 90560-15022 | Spacer(for cylinder head set bolt) | 1.05 | 6 | |
| 90560-T0026 | - | Out of stock | 6 | |
| RETAINER, CAMSHAFT OIL SEAL | ||||
| 11382-0E010 | Retainer, camshaft oil seal | Out of stock | 1 | |
| 11382-11020 | Retainer, camshaft oil seal | 5.69 | 1 | |
| HANGER, ENGINE, NO.1 UPPER | ||||
| 12284-0E010 | - | Out of stock | 1 | |
| 12284-11010 | Hanger, engine, no.1 upper | 9.49 | 1 | |
| GASKET, NOZZLE HOLDER | ||||
| 23682-0E010 | Gasket, nozzle holder | 1.13 | 4 | |
| 23682-11020 | Gasket, nozzle holder | 3.42 | 4 | |
| Subschemes | ||||
| VENTILATION HOSE | ||||
| VACUUM PUMP | ||||
| ELECTRONIC CONTROLED DIESEL (ECD) | ||||
Scheme fits to:
Steering wheel
Left
Body style
Pickup
Drive
4WD
Transmission
AT
Fuel
Diesel
Engine
1GD-FTV
Volume
2.80
Frame
GUN126L
Produсtion years
2015
2016
2017
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-0E010 | - | Out of stock | 1 | |
| 11159-0E010 | Gasket, camshaft bearing cap oil hole | 2.84 | 2 | |
| 11201-0E010 | Cover sub-assy, cylinder head | 196.68 | 1 | |
|
11213-0E010
|
Gasket, cylinder head cover | 13.91 | 1 | |
| 11214-0E010 | Gasket, cylinder head cover, no.2 | 4.07 | 1 | |
| 11382-0E010 | Retainer, camshaft oil seal | Out of stock | 1 | |
| 12180-0H020 | Cap sub-assy, oil filler | 7.58 | 1 | |
| 12281-0E010 | - | Out of stock | 1 | |
| 12282-0E010 | - | Out of stock | - | |
| 12284-0E010 | - | Out of stock | 1 | |
| 12601-0E010 | Cover sub-assy, engine, no.1 | 130.88 | 1 | |
| 12631-0E010 | - | Out of stock | 1 | |
| 12632-0E010 | Bracket, engine cover, no.2 | 9.75 | 1 | |
| 23682-0E010 | Gasket, nozzle holder | 1.13 | 4 | |
| 90080-43027 | Gasket (for oil filler cap) | 1.16 | 1 | |
| 90105-T0052 | - | Out of stock | - | |
| 90105T0073 | - | Not available | - | |
| 90109-06384 | Bolt | 1.00 | - | |
| 90109-06385 | Bolt, v-bank cover; Bracket, v-bank cover, no.1; Bracket, v-bank cover, no.2; Joint, engine cover | 1.00 | - | |
| 90109-T0055 | - | Out of stock | - | |
| 90109-T0062 | - | Out of stock | - | |
| 90119T0219 | - | Not available | - | |
| 90119-T0238 | Bolt(for egr valve) | 1.00 | - | |
| 90119-T0260 | - | Out of stock | - | |
| 90119-T0342 | Bolt (for transmission control cable bracket) | Out of stock | - | |
| 90126-06030 | Bolt, double sided | 1.00 | - | |
| 90176-08058 | Nut | 1.00 | - | |
| 90178-T0018 | Nut, rear licence plate | 1.00 | - | |
| 90250-T0011 | - | Out of stock | 2 | |
| 90253-11021 | Pin, ring | 1.03 | 4 | |
| 90341-T0005 | Plug, w/head straight screw, no.1 | 3.55 | 4 | |
| 90560-T0026 | - | Out of stock | 6 | |
|
90919-05060
|
Sensor, cam position; Sensor, cam position, lh; Sensor, cam position, rh; Sensor, camshaft position; Sensor, crank position, no.1; Sensor, crank position, no.2 | 36.28 | 1 | |
|
91551-80625
|
Bolt | 1.00 | - | |
| 91552-81025 | Bolt | 1.00 | - | |
| 91671-80820 | Bolt | 1.00 | - | |
| 91671-80825 | Bolt | 1.00 | - | |
| 91671-80835 | Bolt, compressor | 1.00 | - | |
| 94151-80600 | Nut | 1.00 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90105-T0130 | - | Out of stock | 2 | |
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-T0551 | - | Out of stock | 16 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| 11123-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| 11123-30020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.83 | 8 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-0E010-A0 | Gasket, cylinder head | 48.03 | 1 | |
| 11115-0E010-B0 | Gasket, cylinder head | 59.73 | 1 | |
| 11115-0E010-C0 | Gasket, cylinder head | 59.73 | 1 | |
| 11115-0E010-D0 | Gasket, cylinder head | 48.03 | 1 | |
| 11115-0E010-E0 | Gasket, cylinder head | 48.03 | 1 | |
| BOLT(FOR CYLINDER HEAD SET) | ||||
| 90910-T2010 | Bolt(for cylinder head set) | Out of stock | 6 | |
| 90910-T2011 | Bolt(for cylinder head set) | Out of stock | 4 | |
| Subschemes | ||||
| VENTILATION HOSE | ||||
| VACUUM PUMP | ||||
| ELECTRONIC CONTROLED DIESEL (ECD) | ||||