Transmission gear (mtm) for Toyota Land Cruiser Prado J90, 2 generation, restyling 06.1999 - 08.2002
-
Steering wheel
-
Grade
-
Fuel
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
RX
RZ
TX
TZ
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1KZ-TE
Volume
3.00
Frame
KH-KZJ90W
KH-KZJ95W
Produсtion years
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90105-06203 | Bolt | 1.00 | - | |
| 91511-60820 | Bolt | 1.00 | - | |
| 33033-60050 | Gear, 2nd | 118.76 | 1 | |
| 33032-60080 | Gear, 1st | 68.39 | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| 33321-35140 | Shaft, output | 172.15 | 1 | |
| 33301-60050 | Shaft, input | 128.00 | 1 | |
| 33361-35040 | Hub, transmission clutch, no.1 | 39.45 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.27 | 1 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33034-60030 | Gear, 3rd | 53.48 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33336-35100 | Gear, 5th | 49.10 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.52 | 1 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.37 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.86 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 17.98 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.11 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 90363-35039 | Bearing (for output shaft center) | 23.03 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.66 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.41 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.87 | 1 | |
| 33428-60030 | Gear, countershaft 5th | 86.18 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.20 | 1 | |
| 33421-60170 | Gear, counter | 163.95 | 1 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.88 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.73 | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.20 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.87 | 1 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 34.02 | 1 | |
| 33388-60010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-60010 | Ring, synchronizer cone | 12.40 | 1 | |
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33387-60050 | Ring, reverse synchronizer | 34.02 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90501-08158 | Spring | 1.00 | 3 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.59 | 3 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.73 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90521-22003 | Ring, snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
RZ
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
5VZ-FE
Volume
3.40
Frame
GF-VZJ90W
Produсtion years
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90105-06203 | Bolt | 1.00 | - | |
| 91511-60820 | Bolt | 1.00 | - | |
|
33033-60040
|
Gear, 2nd | 85.92 | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| 33321-35140 | Shaft, output | 172.15 | 1 | |
| 33301-35090 | Shaft, input | 145.54 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.27 | 1 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33034-60040 | Gear, 3rd | 75.40 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33336-35100 | Gear, 5th | 49.10 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.52 | 1 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.37 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.86 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 17.98 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.11 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 90363-35039 | Bearing (for output shaft center) | 23.03 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.66 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.41 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.87 | 1 | |
| 33428-60030 | Gear, countershaft 5th | 86.18 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.20 | 1 | |
| 33421-60180 | Gear, counter | 277.93 | 1 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.88 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.73 | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.20 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.87 | 1 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 34.02 | 1 | |
| 33388-60010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-60010 | Ring, synchronizer cone | 12.40 | 1 | |
| 33387-60050 | Ring, reverse synchronizer | 34.02 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90501-08158 | Spring | 1.00 | 3 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.59 | 3 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.73 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| 33176-60010 | Separator, manual transmission oil, no.1 | 4.13 | 1 | |
| GEAR, 1ST | ||||
| 33032-60050 | Gear, 1st | 75.40 | 1 | |
| 33032-60120 | Gear, 1st | 156.06 | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-35040 | Hub, transmission clutch, no.1 | 39.45 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.75 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.28 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
RX
RZ
TX
TZ
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
KH-KDJ90W
KH-KDJ95W
Produсtion years
2000
2001
2002
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33032-60110 | Gear, 1st | 105.21 | 1 | |
| 33033-60050 | Gear, 2nd | 118.76 | 1 | |
| 33034-60030 | Gear, 3rd | 53.48 | 1 | |
| 33301-60050 | Shaft, input | 128.00 | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.20 | 1 | |
| 33321-35140 | Shaft, output | 172.15 | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| 33336-35100 | Gear, 5th | 49.10 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.73 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.73 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.75 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.27 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 34.02 | 1 | |
| 33387-60050 | Ring, reverse synchronizer | 34.02 | 1 | |
| 33388-60010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-60010 | Ring, synchronizer cone | 12.40 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.59 | 3 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.37 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.52 | 1 | |
| 33421-60170 | Gear, counter | 163.95 | 1 | |
| 33428-60030 | Gear, countershaft 5th | 86.18 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.86 | 1 | |
| 90105-06258 | Bolt | 1.00 | - | |
| 90250-05026 | Pin | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.11 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.03 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 17.98 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.87 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.41 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.87 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.20 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.88 | 1 | |
| 91511-J0820 | Bolt, washer based head hexagon (for transfer case cover) | 1.00 | - | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90521-22003 | Ring, snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.28 | 1 | |
| SPRING, COMPRESSION | ||||
| 90501-08158 | Spring | 1.00 | 3 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
RZ
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
5VZ-FE
Volume
3.40
Frame
GF-VZJ90W
Produсtion years
2000
2001
2002
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
33033-60040
|
Gear, 2nd | 85.92 | 1 | |
| 33034-60040 | Gear, 3rd | 75.40 | 1 | |
| 33176-60010 | Separator, manual transmission oil, no.1 | 4.13 | 1 | |
| 33301-35090 | Shaft, input | 145.54 | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.20 | 1 | |
| 33321-35140 | Shaft, output | 172.15 | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| 33336-35100 | Gear, 5th | 49.10 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.73 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.73 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.27 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 34.02 | 1 | |
| 33387-60050 | Ring, reverse synchronizer | 34.02 | 1 | |
| 33388-60010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-60010 | Ring, synchronizer cone | 12.40 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.59 | 3 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.37 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.52 | 1 | |
| 33421-60180 | Gear, counter | 277.93 | 1 | |
| 33428-60030 | Gear, countershaft 5th | 86.18 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.86 | 1 | |
| 90105-06258 | Bolt | 1.00 | - | |
| 90250-05026 | Pin | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.11 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.03 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 17.98 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.87 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.41 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.87 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.20 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.88 | 1 | |
| 91511-J0820 | Bolt, washer based head hexagon (for transfer case cover) | 1.00 | - | |
| GEAR, 1ST | ||||
| 33032-60050 | Gear, 1st | 75.40 | 1 | |
| 33032-60120 | Gear, 1st | 156.06 | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-35040 | Hub, transmission clutch, no.1 | 39.45 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.75 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.28 | 1 | |
| SPRING, COMPRESSION | ||||
| 90501-08158 | Spring | 1.00 | 3 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
Scheme fits to:
Steering wheel
Left
Body style
SUV
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
5VZ-FE
Volume
3.40
Frame
VZJ90
VZJ95
Produсtion years
1999
2000
2001
2002
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
33033-60040
|
Gear, 2nd | 85.92 | 1 | |
| 33034-60040 | Gear, 3rd | 75.40 | 1 | |
| 33176-60010 | Separator, manual transmission oil, no.1 | 4.13 | 1 | |
| 33301-35090 | Shaft, input | 145.54 | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.20 | 1 | |
| 33321-35140 | Shaft, output | 172.15 | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| 33336-35100 | Gear, 5th | 49.10 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.73 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.73 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.27 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.66 | 1 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 34.02 | 1 | |
| 33387-60050 | Ring, reverse synchronizer | 34.02 | 1 | |
| 33388-60010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-60010 | Ring, synchronizer cone | 12.40 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.59 | 3 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.37 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.52 | 1 | |
| 33421-60180 | Gear, counter | 277.93 | 1 | |
| 33428-60030 | Gear, countershaft 5th | 86.18 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.86 | 1 | |
| 90105-06203 | Bolt | 1.00 | - | |
| 90250-05026 | Pin | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.11 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.03 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 17.98 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.87 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.41 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.87 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.20 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.88 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
| GEAR, 1ST | ||||
| 33032-60050 | Gear, 1st | 75.40 | 1 | |
| 33032-60120 | Gear, 1st | 156.06 | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-35040 | Hub, transmission clutch, no.1 | 39.45 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.75 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.28 | 1 | |
| SPRING, COMPRESSION | ||||
| 90501-08158 | Spring | 1.00 | 3 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
Scheme fits to:
Steering wheel
Left
Body style
SUV
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
KDJ90
KDJ95
Produсtion years
2000
2001
2002
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33032-60120 | Gear, 1st | 156.06 | 1 | |
|
33033-60040
|
Gear, 2nd | 85.92 | 1 | |
| 33034-60030 | Gear, 3rd | 53.48 | 1 | |
| 33301-60050 | Shaft, input | 128.00 | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.20 | 1 | |
| 33321-35140 | Shaft, output | 172.15 | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| 33336-35100 | Gear, 5th | 49.10 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.73 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.73 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.75 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.27 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 34.02 | 1 | |
| 33387-60050 | Ring, reverse synchronizer | 34.02 | 1 | |
| 33388-60010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-60010 | Ring, synchronizer cone | 12.40 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.59 | 3 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.37 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.52 | 1 | |
| 33421-60200 | Gear, counter | Discontinued | 1 | |
| 33428-60030 | Gear, countershaft 5th | 86.18 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.86 | 1 | |
| 90105-06258 | Bolt | 1.00 | - | |
| 90250-05026 | Pin | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.11 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.03 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 17.98 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.87 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.41 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.87 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.20 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.88 | 1 | |
| 91511-J0820 | Bolt, washer based head hexagon (for transfer case cover) | 1.00 | - | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90521-22003 | Ring, snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.28 | 1 | |