Number | Name | Price from, USD | Required |
---|
11363-31010 | Cover, flywheel housing side | 4.75 | 1 | |
11401-80810 | Block sub-assy, cylinder | 2,182.51 | 1 | |
11445-31020 | Spacer, cylinder block water jacket, rh | 13.38 | 1 | |
11446-31020 | Spacer, cylinder block water jacket, lh | 13.38 | 1 | |
11452-31040 | Guide, oil level gage | 11.18 | 1 | |
12101-31101 | Pan sub-assy, oil | 97.54 | 1 | |
12102-31030 | Pan sub-assy, oil, no.2 | 59.84 | 1 | |
12121-31060 | Plate, oil pan baffle, no.1 | 29.57 | 1 | |
12142-31010 | Guide, oil level gage, no.2 | 14.52 | 1 | |
12151-31010 | Gasket, oil pan | 7.04 | 2 | |
15301-31080 | Gage sub-assy, oil level | 6.07 | 1 | |
15708-31010 | Nozzle sub-assy, oil, no.1 | 8.45 | 3 | |
90110-06018 | Bolt | 1.00 | - | |
90119-06938 | Bolt | 1.00 | - | |
90126-06028 | Bolt, stud | 1.00 | - | |
90126-08047 | Bolt, stud(for egr valve) | 1.00 | - | |
90126-08052 | Bolt, stud | 1.00 | 2 | |
90210-07006 | Seal | 1.00 | - | |
90250-04097 | Pin | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 4 | |
90250-10030 | Pin | 1.00 | 1 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90301-12018 | Ring, o (for oil level gage guide) | 1.23 | 1 | |
90341-12012 | Plug | 1.41 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02153 | Bolt(for crankshaft bearing cap set) | 2.11 | - | |
90910-02154 | Bolt (for crankshaft bearing cap set) | 2.11 | 9 | |
90910-09087 | Plug | 2.02 | 2 | |
90910-09129 | Cock assy, drain(for water inlet housing); Cock sub-assy, water drain (for cylinder block); Drain cock assy(for water inlet pipe) | 3.26 | 2 | |
90919-05057 | Sensor, crank position | 24.29 | 1 | |
91551-80616 | Bolt | 1.00 | - | |
91551-80825 | Bolt | 1.00 | - | |
91551-80845 | Bolt (for front differential case) | 1.00 | - | |
91551-L0830 | Bolt | 1.00 | - | |
91551-L0845 | Bolt | 1.00 | - | |
91671-80610 | Bolt | 1.00 | - | |
91671-80612 | Bolt | 1.00 | - | |
91671-80816 | Bolt (for transmission control cable bracket) | 1.00 | - | |
94151-80600 | Nut | 1.00 | - | |
94151-80800 | Nut | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96741-19005 | Ring, o (for oil level gage) | 1.23 | 1 |
Number | Name | Price from, USD | Required |
---|
11361-31040 | Cover, flywheel housing under | 2.99 | 1 | |
11363-31010 | Cover, flywheel housing side | 4.75 | 1 | |
11401-80810 | Block sub-assy, cylinder | 2,182.51 | 1 | |
11445-31020 | Spacer, cylinder block water jacket, rh | 13.38 | 1 | |
11446-31020 | Spacer, cylinder block water jacket, lh | 13.38 | 1 | |
11452-31050 | Guide, oil level gage | 10.65 | 1 | |
12101-31110 | Pan sub-assy, oil | 341.46 | 1 | |
12102-31040 | Pan sub-assy, oil, no.2 | 42.77 | 1 | |
12121-31060 | Plate, oil pan baffle, no.1 | 29.57 | 1 | |
12142-31020 | Guide, oil level gage, no.2 | 16.10 | 1 | |
12151-31010 | Gasket, oil pan | 7.04 | 2 | |
15301-31070 | Gage sub-assy, oil level | 6.07 | 1 | |
15708-31010 | Nozzle sub-assy, oil, no.1 | 8.45 | 3 | |
90105-08254 | Bolt | 1.68 | - | |
90110-06018 | Bolt | 1.00 | - | |
90119-06938 | Bolt | 1.00 | - | |
90126-06028 | Bolt, stud | 1.00 | - | |
90126-08047 | Bolt, stud(for egr valve) | 1.00 | - | |
90126-08052 | Bolt, stud | 1.00 | 2 | |
90210-07006 | Seal | 1.00 | - | |
90250-04097 | Pin | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 4 | |
90250-10030 | Pin | 1.00 | 1 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90301-12018 | Ring, o (for oil level gage guide) | 1.23 | 1 | |
90341-12012 | Plug | 1.41 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02153 | Bolt(for crankshaft bearing cap set) | 2.11 | - | |
90910-02154 | Bolt (for crankshaft bearing cap set) | 2.11 | 9 | |
90910-09087 | Plug | 2.02 | 2 | |
90910-09129 | Cock assy, drain(for water inlet housing); Cock sub-assy, water drain (for cylinder block); Drain cock assy(for water inlet pipe) | 3.26 | 2 | |
90919-05057 | Sensor, crank position | 24.29 | 1 | |
91551-80616 | Bolt | 1.00 | - | |
91551-80825 | Bolt | 1.00 | - | |
91551-80845 | Bolt (for front differential case) | 1.00 | - | |
91551-L0830 | Bolt | 1.00 | - | |
91551-L0845 | Bolt | 1.00 | - | |
91671-80610 | Bolt | 1.00 | - | |
91671-80612 | Bolt | 1.00 | - | |
91671-80816 | Bolt (for transmission control cable bracket) | 1.00 | - | |
92122-80825 | Bolt, stud (for manifold to cylinder head) | 1.00 | - | |
94151-80600 | Nut | 1.00 | - | |
94151-80800 | Nut | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96741-19005 | Ring, o (for oil level gage) | 1.23 | 1 |
Number | Name | Price from, USD | Required |
---|
11363-31030 | Cover, flywheel housing side | 4.75 | 1 | |
11401-39777 | Block sub-assy, cylinder | 2,147.31 | 1 | |
11452-31040 | Guide, oil level gage | 11.18 | 1 | |
12101-31101 | Pan sub-assy, oil | 97.54 | 1 | |
12102-31030 | Pan sub-assy, oil, no.2 | 59.84 | 1 | |
12121-31080 | Plate, oil pan baffle, no.1 | 26.84 | 1 | |
12142-31011 | Guide, oil level gage, no.2 | 9.06 | 1 | |
12151-31010 | Gasket, oil pan | 7.04 | 2 | |
15301-31080 | Gage sub-assy, oil level | 6.07 | 1 | |
15708-31050 | Nozzle sub-assy, oil, no.1 | 6.03 | 3 | |
90110-06018 | Bolt | 1.00 | - | |
90110-06040 | Bolt, oil nozzle | 1.00 | - | |
90119-06938 | Bolt | 1.00 | - | |
90126-06028 | Bolt, stud | 1.00 | - | |
90126-08047 | Bolt, stud(for egr valve) | 1.00 | - | |
90126-08052 | Bolt, stud | 1.00 | 2 | |
90179-06326 | Nut | 1.00 | - | |
90210-07006 | Seal | 1.00 | - | |
90250-04097 | Pin | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 4 | |
90250-10030 | Pin | 1.00 | 1 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90301-12018 | Ring, o (for oil level gage guide) | 1.23 | 1 | |
90341-12012 | Plug | 1.41 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02153 | Bolt(for crankshaft bearing cap set) | 2.11 | - | |
90910-02154 | Bolt (for crankshaft bearing cap set) | 2.11 | 9 | |
90910-09087 | Plug | 2.02 | 1 | |
90919-05057 | Sensor, crank position | 24.29 | 1 | |
91551-80616 | Bolt | 1.00 | - | |
91551-F0825 | - | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
91551-L0830 | Bolt | 1.00 | - | |
91551-L0845 | Bolt | 1.00 | - | |
91671-80610 | Bolt | 1.00 | - | |
91671-80612 | Bolt | 1.00 | - | |
91671-80816 | Bolt (for transmission control cable bracket) | 1.00 | - | |
94151-80600 | Nut | 1.00 | - | |
94151-80800 | Nut | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96741-19005 | Ring, o (for oil level gage) | 1.23 | 1 | |
COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK) | ||||
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 2.02 | 1 | |
90910-09129 | Cock assy, drain(for water inlet housing); Cock sub-assy, water drain (for cylinder block); Drain cock assy(for water inlet pipe) | 3.26 | 1 |
Number | Name | Price from, USD | Required |
---|
11363-31030 | Cover, flywheel housing side | 4.75 | 1 | |
11401-80817 | Block sub-assy, cylinder | 1,504.87 | 1 | |
11445-31020 | Spacer, cylinder block water jacket, rh | 13.38 | 1 | |
11446-31020 | Spacer, cylinder block water jacket, lh | 13.38 | 1 | |
11452-31040 | Guide, oil level gage | 11.18 | 1 | |
12101-31101 | Pan sub-assy, oil | 97.54 | 1 | |
12102-31030 | Pan sub-assy, oil, no.2 | 59.84 | 1 | |
12121-31060 | Plate, oil pan baffle, no.1 | 29.57 | 1 | |
12142-31011 | Guide, oil level gage, no.2 | 9.06 | 1 | |
12151-31010 | Gasket, oil pan | 7.04 | 2 | |
15301-31080 | Gage sub-assy, oil level | 6.07 | 1 | |
15708-31010 | Nozzle sub-assy, oil, no.1 | 8.45 | 3 | |
90110-06018 | Bolt | 1.00 | - | |
90110-06040 | Bolt, oil nozzle | 1.00 | - | |
90119-06938 | Bolt | 1.00 | - | |
90126-06028 | Bolt, stud | 1.00 | - | |
90126-08047 | Bolt, stud(for egr valve) | 1.00 | - | |
90126-08052 | Bolt, stud | 1.00 | 2 | |
90179-06326 | Nut | 1.00 | - | |
90210-07006 | Seal | 1.00 | - | |
90250-04097 | Pin | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 4 | |
90250-10030 | Pin | 1.00 | 1 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90301-12018 | Ring, o (for oil level gage guide) | 1.23 | 1 | |
90341-12012 | Plug | 1.41 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02153 | Bolt(for crankshaft bearing cap set) | 2.11 | - | |
90910-02154 | Bolt (for crankshaft bearing cap set) | 2.11 | 9 | |
90910-09087 | Plug | 2.02 | 1 | |
90919-05057 | Sensor, crank position | 24.29 | 1 | |
91551-80616 | Bolt | 1.00 | - | |
91551-F0825 | - | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
91551-L0830 | Bolt | 1.00 | - | |
91551-L0845 | Bolt | 1.00 | - | |
91671-80610 | Bolt | 1.00 | - | |
91671-80612 | Bolt | 1.00 | - | |
91671-80816 | Bolt (for transmission control cable bracket) | 1.00 | - | |
94151-80600 | Nut | 1.00 | - | |
94151-80800 | Nut | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96741-19005 | Ring, o (for oil level gage) | 1.23 | 1 | |
COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK) | ||||
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 2.02 | 1 | |
90910-09129 | Cock assy, drain(for water inlet housing); Cock sub-assy, water drain (for cylinder block); Drain cock assy(for water inlet pipe) | 3.26 | 1 |
Number | Name | Price from, USD | Required |
---|
11361-31040 | Cover, flywheel housing under | 2.99 | 1 | |
11363-31030 | Cover, flywheel housing side | 4.75 | 1 | |
11401-80817 | Block sub-assy, cylinder | 1,504.87 | 1 | |
11445-31020 | Spacer, cylinder block water jacket, rh | 13.38 | 1 | |
11446-31020 | Spacer, cylinder block water jacket, lh | 13.38 | 1 | |
11452-31050 | Guide, oil level gage | 10.65 | 1 | |
12101-31110 | Pan sub-assy, oil | 341.46 | 1 | |
12102-31040 | Pan sub-assy, oil, no.2 | 42.77 | 1 | |
12121-31060 | Plate, oil pan baffle, no.1 | 29.57 | 1 | |
12142-31021 | Guide, oil level gage, no.2 | 9.06 | 1 | |
12151-31010 | Gasket, oil pan | 7.04 | 2 | |
15301-31070 | Gage sub-assy, oil level | 6.07 | 1 | |
15708-31010 | Nozzle sub-assy, oil, no.1 | 8.45 | 3 | |
90105-08254 | Bolt | 1.68 | - | |
90110-06018 | Bolt | 1.00 | - | |
90110-06040 | Bolt, oil nozzle | 1.00 | - | |
90119-06938 | Bolt | 1.00 | - | |
90126-06028 | Bolt, stud | 1.00 | - | |
90126-08047 | Bolt, stud(for egr valve) | 1.00 | - | |
90126-08052 | Bolt, stud | 1.00 | 2 | |
90179-06326 | Nut | 1.00 | - | |
90210-07006 | Seal | 1.00 | - | |
90250-04097 | Pin | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 4 | |
90250-10030 | Pin | 1.00 | 1 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90301-12018 | Ring, o (for oil level gage guide) | 1.23 | 1 | |
90341-12012 | Plug | 1.41 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02153 | Bolt(for crankshaft bearing cap set) | 2.11 | - | |
90910-02154 | Bolt (for crankshaft bearing cap set) | 2.11 | 9 | |
90910-09087 | Plug | 2.02 | 1 | |
90919-05057 | Sensor, crank position | 24.29 | 1 | |
91551-80616 | Bolt | 1.00 | - | |
91551-80825 | Bolt | 1.00 | - | |
91551-80845 | Bolt (for front differential case) | 1.00 | - | |
91551-L0830 | Bolt | 1.00 | - | |
91551-L0845 | Bolt | 1.00 | - | |
91671-80610 | Bolt | 1.00 | - | |
91671-80612 | Bolt | 1.00 | - | |
91671-80816 | Bolt (for transmission control cable bracket) | 1.00 | - | |
92122-80825 | Bolt, stud (for manifold to cylinder head) | 1.00 | - | |
94151-80600 | Nut | 1.00 | - | |
94151-80800 | Nut | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96741-19005 | Ring, o (for oil level gage) | 1.23 | 1 | |
COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK) | ||||
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 2.02 | 1 | |
90910-09129 | Cock assy, drain(for water inlet housing); Cock sub-assy, water drain (for cylinder block); Drain cock assy(for water inlet pipe) | 3.26 | 1 |