Transmission gear (mtm) for Toyota Soarer Z30, 3 generation, restyling 01.1994 - 07.1996
Scheme fits to:
Steering wheel
Right
Body style
Coupe
Grade
GTT
Drive
FR
Transmission
MT
Fuel
Gasoline
Engine
1JZ-GTE
Volume
2.50
Frame
E-JZZ30
Produсtion years
1995
1996
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33032-35040 | Gear, 1st | 68.60 | 1 | |
|
33033-22050
|
Gear, 2nd | 157.44 | 1 | |
| 33046-22040 | Gear, countershaft 5th | 124.90 | 1 | |
| 33301-22040 | Shaft, input | Discontinued | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.28 | 1 | |
| 33321-35130 | Shaft, output | Discontinued | 1 | |
| 33336-14040 | Gear, 5th | Discontinued | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.40 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.40 | 1 | |
| 33361-35040 | Hub, transmission clutch, no.1 | 39.58 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 61.57 | 1 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.00 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.31 | 1 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 31.58 | 1 | |
| 33387-35010 | Ring, reverse synchronizer | 34.13 | 1 | |
| 33388-35010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-35010 | Ring, synchronizer cone | 13.86 | 1 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.55 | 3 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.57 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 68.60 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.89 | 1 | |
| 33481-35130 | Gear, speedometer drive (mtm) | 10.03 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.14 | 1 | |
|
90363-35023
|
Bearing (for output shaft center) | 32.31 | 1 | |
|
90363-40034
|
Bearing | 18.04 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.92 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.47 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.90 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.31 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| 90501-08158 | Spring | 1.00 | 3 | |
| 90520-28030 | Ring or spacer (for mtm speedometer drive gear) | 1.00 | 2 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.06 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.50 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.06 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.90 | 1 | |
| GEAR, REVERSE | ||||
| 33331-35070 | Gear, reverse | Discontinued | 1 | |
| 33331-60040 | Gear, reverse | 119.92 | 1 | |
| GEAR, 3RD | ||||
| 33034-22030 | Gear, 3rd | 109.94 | 1 | |
| 33034-24010 | Gear, 3rd | 109.94 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | ||||
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33391-35010 | Spring, synchromesh shifting key, no.2 | 1.00 | 2 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-22060 | Gear, counter | Discontinued | 1 | |
| 33421-24020 | Gear, counter | Discontinued | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.50 | 1 | |
| 90521-81001 | Ring, hole snap; Ring, hole snap (for front drive inboard joint lh); Ring, hole snap (for front drive inboard joint); Ring, shaft snap (for output shaft bearing) | Discontinued | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-35010 | Ring set, synchronizer, no.1 | Discontinued | 1 | |
| 33037-60020 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Coupe
Grade
GTT
Drive
FR
Transmission
MT
Fuel
Gasoline
Engine
1JZ-GTE
Volume
2.50
Frame
E-JZZ30
Produсtion years
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33032-35040 | Gear, 1st | 68.60 | 1 | |
| 33037-35010 | Ring set, synchronizer, no.1 | Discontinued | 1 | |
| 33321-35130 | Shaft, output | Discontinued | 1 | |
| 33336-14040 | Gear, 5th | Discontinued | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.40 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.30 | 1 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33387-35010 | Ring, reverse synchronizer | 34.13 | 1 | |
| 33388-35010 | Ring, reverse synchronizer pull | 7.49 | 1 | |
| 33389-35010 | Ring, synchronizer cone | 13.86 | 1 | |
| 33394-35030 | Key, synchromesh shifting, no.3 | 2.55 | 3 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.89 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
|
90363-35023
|
Bearing (for output shaft center) | 32.31 | 1 | |
|
90363-40034
|
Bearing | 18.04 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.47 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.90 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90501-07104 | Spring, compression | 1.00 | 3 | |
| 90501-08158 | Spring | 1.00 | 3 | |
| 90520-28030 | Ring or spacer (for mtm speedometer drive gear) | 1.00 | 2 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.06 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.50 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.06 | 1 | |
| GEAR, 2ND | ||||
| 33033-22040 | Gear, 2nd | 132.81 | 1 | |
|
33033-22050
|
Gear, 2nd | 157.44 | 1 | |
| 33033-25010 | Gear, 2nd | 132.81 | 1 | |
| GEAR, REVERSE | ||||
| 33331-35050 | Gear, reverse | 109.94 | 1 | |
| 33331-35070 | Gear, reverse | Discontinued | 1 | |
| 33331-35080 | Gear, reverse | Discontinued | 1 | |
| SHAFT, INPUT | ||||
| 33301-14020 | Shaft, input | Discontinued | 1 | |
| 33301-22040 | Shaft, input | Discontinued | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-35030 | Hub, transmission clutch, no.1 | Discontinued | 1 | |
| 33361-35040 | Hub, transmission clutch, no.1 | 39.58 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.2 | ||||
| 33364-35020 | Sleeve, transmission hub, no.2 | 61.57 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 61.57 | 1 | |
| GEAR, 3RD | ||||
| 33034-14040 | Gear, 3rd | Discontinued | 1 | |
| 33034-22030 | Gear, 3rd | 109.94 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35020 | Ring, synchronizer | 23.98 | 2 | |
| 33368-35030 | Ring, synchronizer | 20.57 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.64 | 1 | |
| GEAR SUB-ASSY, REVERSE IDLER | ||||
| 33402-35040 | Gear sub-assy, reverse idler | Discontinued | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 68.60 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.3 | ||||
| 33395-35010 | Sleeve, transmission hub, no.3 | 61.57 | 1 | |
| 33395-35030 | Sleeve, transmission hub, no.3 | 61.57 | 1 | |
| 33395-35031 | Sleeve, transmission hub, no.3 | 61.57 | 1 | |
| 33395-35040 | Sleeve, transmission hub, no.3 | 61.57 | 1 | |
| GEAR, SPEEDOMETER DRIVE (MTM) | ||||
| 33481-14080 | Gear, speedometer drive (mtm) | Discontinued | 1 | |
| 33481-35130 | Gear, speedometer drive (mtm) | 10.03 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | ||||
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33391-35010 | Spring, synchromesh shifting key, no.2 | 1.00 | 2 | |
| BEARING, INPUT SHAFT | ||||
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-25013 | Bearing, input shaft | 12.34 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| BEARING (FOR OUTPUT SHAFT REAR) | ||||
| 90363-30047 | Bearing (for output shaft rear) | 18.04 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.14 | 1 | |
| KEY, SYNCHROMESH SHIFTING, NO.1 | ||||
| 33365-35030 | Key, synchromesh shifting, no.1 | 2.33 | 3 | |
| 33365-35040 | Key, synchromesh shifting, no.1 | 1.00 | 3 | |
| RING, SYNCHRONIZER, NO.1 | ||||
| 33367-35010 | Ring, synchronizer, no.1 | 26.58 | 2 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.31 | 2 | |
| GEAR, COUNTERSHAFT 5TH | ||||
| 33046-14011 | Gear, countershaft 5th | Discontinued | 1 | |
| 33046-22030 | Gear, countershaft 5th | 124.90 | 1 | |
| 33046-22040 | Gear, countershaft 5th | 124.90 | 1 | |
| BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | ||||
| 90365-25018 | Bearing or roller (for counter gear front) | 32.31 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.31 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23037 | Ring, counter gear front bearing snap, no.2 | Discontinued | 1 | |
| 90520-23038 | Ring, counter gear front bearing snap, no.2 | Discontinued | 1 | |
| 90520-23039 | Ring, counter gear front bearing snap, no.2 | Discontinued | 1 | |
| 90520-23040 | Ring, counter gear front bearing snap, no.2 | Discontinued | 1 | |
| 90520-23041 | Ring, counter gear front bearing snap, no.2 | Discontinued | 1 | |
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-14090 | Gear, counter | Discontinued | 1 | |
| 33421-22060 | Gear, counter | Discontinued | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| SPACER (FOR OUTPUT SHAFT) | ||||
| 90560-30005 | Spacer | Discontinued | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.90 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.50 | 1 | |
| 90521-81001 | Ring, hole snap; Ring, hole snap (for front drive inboard joint lh); Ring, hole snap (for front drive inboard joint); Ring, shaft snap (for output shaft bearing) | Discontinued | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| WASHER, 5TH GEAR THRUST | ||||
| 33346-35010 | Washer, 5th gear thrust | 8.71 | 1 | |
| 33346-35020 | Washer, 5th gear thrust | 4.40 | 1 | |
| PIECE, GEAR SPLINE, NO.5 | ||||
| 33318-35020 | Piece, gear spline, no.5 | Discontinued | 1 | |
| 33318-35040 | Piece, gear spline, no.5 | 24.28 | 1 | |
| 33318-35050 | Piece, gear spline, no.5 | 21.11 | 1 | |
| BEARING (FOR COUNTER 5TH GEAR) | ||||
| 90364-28009 | Bearing (for counter 5th gear) | Discontinued | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.92 | 1 | |
| RING, SYNCHRONIZER, OUTER NO.3 | ||||
| 33384-35010 | Ring, synchronizer, outer no.3 | Discontinued | 1 | |
|
33384-35011
|
Ring, synchronizer, outer no.3 | 31.58 | 1 | |