Transmission gear (mtm) for Toyota ToyoAce 7 generation, 2 restyling 08.2007 - 04.2016
-
Body style
-
Drive
-
Fuel
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
QDF-KDY221
Produсtion years
2011
2012
2013
2014
2015
2016
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-60050 | Gear, 2nd | 127.52 | 1 | |
| 33034-60030 | Gear, 3rd | 53.58 | 1 | |
| 33301-60050 | Shaft, input | 128.24 | 1 | |
| 33318-60030 | Piece, gear spline, no.5 | 26.00 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33384-60090 | Ring, synchronizer, outer no.3 | 17.68 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-60020 | Key, synchromesh shifting, no.3 | 2.20 | 2 | |
| 33395-60050 | Sleeve, transmission hub, no.3 | 41.38 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-35130 | Gear, speedometer drive (mtm) | 10.01 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.13 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-28030 | Ring or spacer (for mtm speedometer drive gear) | 1.00 | 2 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.89 | 1 | |
| GEAR, 1ST | ||||
| 33032-60110 | Gear, 1st | 105.41 | 1 | |
| 33032-60111 | Gear, 1st | 105.41 | 1 | |
| GEAR, REVERSE | ||||
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33331-60041 | Gear, reverse | 65.00 | 1 | |
| SHAFT, OUTPUT | ||||
| 33321-35190 | Shaft, output | 213.82 | 1 | |
| 33321-35191 | Shaft, output | 194.97 | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-60050 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| 33361-71020 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.2 | ||||
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33364-60070 | Sleeve, transmission hub, no.2 | 38.82 | 1 | |
| KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33366-35050 | Key, synchromesh shifting, no.2 | 1.93 | 3 | |
| HUB, TRANSMISSION CLUTCH, NO.2 | ||||
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33362-60030 | Hub, transmission clutch, no.2 | 27.58 | 1 | |
| GEAR, 5TH | ||||
| 33336-35100 | Gear, 5th | 49.19 | 1 | |
| 33336-35101 | Gear, 5th | 79.05 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| 33368-35050 | Ring, synchronizer | 15.84 | 1 | |
| 33368-35070 | Ring, synchronizer | 14.61 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
| 33392-60020 | Spring, synchromesh shifting key, no.3 | 1.30 | 1 | |
| 33392-60030 | Spring, synchromesh shifting key, no.3 | 1.47 | 1 | |
| 33392-60040 | Spring, synchromesh shifting key, no.3 | 1.14 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| GEAR, COUNTERSHAFT 5TH | ||||
| 33428-60040 | Gear, countershaft 5th | 86.50 | 1 | |
| 33428-60041 | Gear, countershaft 5th | 86.50 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-60170 | Gear, counter | 164.26 | 1 | |
| 33421-71010 | Gear, counter | 164.26 | 1 | |
| 33421-71011 | Gear, counter | 164.26 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-33021 | Ring, snap | 1.05 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.34 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
LDF-KDY221
Produсtion years
2007
2008
2009
2010
2011
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-60050 | Gear, 2nd | 127.52 | 1 | |
| 33034-60030 | Gear, 3rd | 53.58 | 1 | |
| 33301-60050 | Shaft, input | 128.24 | 1 | |
| 33318-60030 | Piece, gear spline, no.5 | 26.00 | 1 | |
| 33321-35190 | Shaft, output | 213.82 | 1 | |
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33336-35100 | Gear, 5th | 49.19 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33384-60090 | Ring, synchronizer, outer no.3 | 17.68 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-60020 | Key, synchromesh shifting, no.3 | 2.20 | 2 | |
| 33395-60050 | Sleeve, transmission hub, no.3 | 41.38 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
| 33421-60170 | Gear, counter | 164.26 | 1 | |
| 33428-60040 | Gear, countershaft 5th | 86.50 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-35130 | Gear, speedometer drive (mtm) | 10.01 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.13 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-28030 | Ring or spacer (for mtm speedometer drive gear) | 1.00 | 2 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.89 | 1 | |
| GEAR, 1ST | ||||
| 33032-60110 | Gear, 1st | 105.41 | 1 | |
| 33032-60111 | Gear, 1st | 105.41 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
| 33392-60020 | Spring, synchromesh shifting key, no.3 | 1.30 | 1 | |
| 33392-60030 | Spring, synchromesh shifting key, no.3 | 1.47 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-33021 | Ring, snap | 1.05 | 1 | |
| WASHER, 5TH GEAR THRUST | ||||
| 33346-35020 | Washer, 5th gear thrust | 4.74 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.34 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Gasoline
NG
Engine
1TR-FE
1TR-FPE
Volume
2.00
Frame
ABF-TRY220
NBG-TRY231
Produсtion years
2011
2012
2013
2014
2015
2016
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-35120 | Gear, 2nd | 75.54 | 1 | |
| 33034-25020 | Gear, 3rd | 75.54 | 1 | |
| 33301-25020 | Shaft, input | 83.45 | 1 | |
| 33318-35050 | Piece, gear spline, no.5 | 21.08 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33369-35011 | Ring, synchronizer, no.3 | 19.52 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33392-14020 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35040 | Key, synchromesh shifting, no.3 | 5.54 | 3 | |
| 33395-35041 | Sleeve, transmission hub, no.3 | 45.68 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25050 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60080 | Gear, 1st | 68.51 | 1 | |
|
33032-60081
|
Gear, 1st | 68.51 | 1 | |
| GEAR, REVERSE | ||||
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33331-60041 | Gear, reverse | 65.00 | 1 | |
| SHAFT, OUTPUT | ||||
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33321-25051 | Shaft, output | Discontinued | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-35040 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| 33361-71010 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.2 | ||||
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33364-60070 | Sleeve, transmission hub, no.2 | 38.82 | 1 | |
| KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33366-35050 | Key, synchromesh shifting, no.2 | 1.93 | 3 | |
| HUB, TRANSMISSION CLUTCH, NO.2 | ||||
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33362-60030 | Hub, transmission clutch, no.2 | 27.58 | 1 | |
| GEAR, 5TH | ||||
| 33336-25020 | Gear, 5th | 31.18 | 1 | |
| 33336-25021 | Gear, 5th | 41.64 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| 33368-35050 | Ring, synchronizer | 15.84 | 1 | |
| 33368-35070 | Ring, synchronizer | 14.61 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, SYNCHRONIZER, NO.1 | ||||
| 33367-35030 | Ring, synchronizer, no.1 | 21.11 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.47 | 1 | |
| GEAR, COUNTERSHAFT 5TH | ||||
| 33046-25020 | Gear, countershaft 5th | 104.53 | 1 | |
| 33046-25021 | Gear, countershaft 5th | 139.66 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-25050 | Gear, counter | 288.99 | 1 | |
| 33421-25051 | Gear, counter | 288.99 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Commercial van
Truck
Drive
FR
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
LDF-KDY241V
QDF-KDY231
Produсtion years
2011
2012
2013
2014
2015
2016
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-60050 | Gear, 2nd | 127.52 | 1 | |
| 33034-60030 | Gear, 3rd | 53.58 | 1 | |
| 33301-60050 | Shaft, input | 128.24 | 1 | |
| 33318-60030 | Piece, gear spline, no.5 | 26.00 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33384-60090 | Ring, synchronizer, outer no.3 | 17.68 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-60020 | Key, synchromesh shifting, no.3 | 2.20 | 2 | |
| 33395-60050 | Sleeve, transmission hub, no.3 | 41.38 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25080 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60110 | Gear, 1st | 105.41 | 1 | |
| 33032-60111 | Gear, 1st | 105.41 | 1 | |
| GEAR, REVERSE | ||||
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33331-60041 | Gear, reverse | 65.00 | 1 | |
| SHAFT, OUTPUT | ||||
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33321-25051 | Shaft, output | Discontinued | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-60050 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| 33361-71020 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.2 | ||||
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33364-60070 | Sleeve, transmission hub, no.2 | 38.82 | 1 | |
| KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33366-35050 | Key, synchromesh shifting, no.2 | 1.93 | 3 | |
| HUB, TRANSMISSION CLUTCH, NO.2 | ||||
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33362-60030 | Hub, transmission clutch, no.2 | 27.58 | 1 | |
| GEAR, 5TH | ||||
| 33336-35100 | Gear, 5th | 49.19 | 1 | |
| 33336-35101 | Gear, 5th | 79.05 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| 33368-35050 | Ring, synchronizer | 15.84 | 1 | |
| 33368-35070 | Ring, synchronizer | 14.61 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
| 33392-60020 | Spring, synchromesh shifting key, no.3 | 1.30 | 1 | |
| 33392-60030 | Spring, synchromesh shifting key, no.3 | 1.47 | 1 | |
| 33392-60040 | Spring, synchromesh shifting key, no.3 | 1.14 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| GEAR, COUNTERSHAFT 5TH | ||||
| 33428-60040 | Gear, countershaft 5th | 86.50 | 1 | |
| 33428-60041 | Gear, countershaft 5th | 86.50 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-60170 | Gear, counter | 164.26 | 1 | |
| 33421-71010 | Gear, counter | 164.26 | 1 | |
| 33421-71011 | Gear, counter | 164.26 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-33021 | Ring, snap | 1.05 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.34 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Gasoline
Engine
1TR-FE
Volume
2.00
Frame
ABF-TRY230
Produсtion years
2011
2012
2013
2014
2015
2016
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-35120 | Gear, 2nd | 75.54 | 1 | |
| 33034-25020 | Gear, 3rd | 75.54 | 1 | |
| 33301-25020 | Shaft, input | 83.45 | 1 | |
| 33318-35050 | Piece, gear spline, no.5 | 21.08 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33369-35011 | Ring, synchronizer, no.3 | 19.52 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33392-14020 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35040 | Key, synchromesh shifting, no.3 | 5.54 | 3 | |
| 33395-35041 | Sleeve, transmission hub, no.3 | 45.68 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25060 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60080 | Gear, 1st | 68.51 | 1 | |
|
33032-60081
|
Gear, 1st | 68.51 | 1 | |
| GEAR, REVERSE | ||||
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33331-60041 | Gear, reverse | 65.00 | 1 | |
| SHAFT, OUTPUT | ||||
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33321-25051 | Shaft, output | Discontinued | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-35040 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| 33361-71010 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.2 | ||||
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33364-60070 | Sleeve, transmission hub, no.2 | 38.82 | 1 | |
| KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33366-35050 | Key, synchromesh shifting, no.2 | 1.93 | 3 | |
| HUB, TRANSMISSION CLUTCH, NO.2 | ||||
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33362-60030 | Hub, transmission clutch, no.2 | 27.58 | 1 | |
| GEAR, 5TH | ||||
| 33336-25020 | Gear, 5th | 31.18 | 1 | |
| 33336-25021 | Gear, 5th | 41.64 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| 33368-35050 | Ring, synchronizer | 15.84 | 1 | |
| 33368-35070 | Ring, synchronizer | 14.61 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, SYNCHRONIZER, NO.1 | ||||
| 33367-35030 | Ring, synchronizer, no.1 | 21.11 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.47 | 1 | |
| GEAR, COUNTERSHAFT 5TH | ||||
| 33046-25020 | Gear, countershaft 5th | 104.53 | 1 | |
| 33046-25021 | Gear, countershaft 5th | 139.66 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-25050 | Gear, counter | 288.99 | 1 | |
| 33421-25051 | Gear, counter | 288.99 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | ||||
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Gasoline
Engine
1TR-FE
Volume
2.00
Frame
ABF-TRY220
Produсtion years
2007
2008
2009
2010
2011
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-35120 | Gear, 2nd | 75.54 | 1 | |
| 33034-25020 | Gear, 3rd | 75.54 | 1 | |
| 33046-25020 | Gear, countershaft 5th | 104.53 | 1 | |
| 33301-25020 | Shaft, input | 83.45 | 1 | |
| 33318-35050 | Piece, gear spline, no.5 | 21.08 | 1 | |
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33336-25020 | Gear, 5th | 31.18 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33361-35040 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33369-35011 | Ring, synchronizer, no.3 | 19.52 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33392-14020 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35040 | Key, synchromesh shifting, no.3 | 5.54 | 3 | |
| 33395-35041 | Sleeve, transmission hub, no.3 | 45.68 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
| 33421-25050 | Gear, counter | 288.99 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25050 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60080 | Gear, 1st | 68.51 | 1 | |
|
33032-60081
|
Gear, 1st | 68.51 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, SYNCHRONIZER, NO.1 | ||||
| 33367-35030 | Ring, synchronizer, no.1 | 21.11 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.47 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| WASHER, 5TH GEAR THRUST | ||||
| 33346-35020 | Washer, 5th gear thrust | 4.74 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
LDF-KDY231
Produсtion years
2007
2008
2009
2010
2011
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-60050 | Gear, 2nd | 127.52 | 1 | |
| 33034-60030 | Gear, 3rd | 53.58 | 1 | |
| 33301-60050 | Shaft, input | 128.24 | 1 | |
| 33318-60030 | Piece, gear spline, no.5 | 26.00 | 1 | |
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33336-35100 | Gear, 5th | 49.19 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33361-60050 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33384-60090 | Ring, synchronizer, outer no.3 | 17.68 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-60020 | Key, synchromesh shifting, no.3 | 2.20 | 2 | |
| 33395-60050 | Sleeve, transmission hub, no.3 | 41.38 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
| 33421-60170 | Gear, counter | 164.26 | 1 | |
| 33428-60040 | Gear, countershaft 5th | 86.50 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25080 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60110 | Gear, 1st | 105.41 | 1 | |
| 33032-60111 | Gear, 1st | 105.41 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
| 33392-60020 | Spring, synchromesh shifting key, no.3 | 1.30 | 1 | |
| 33392-60030 | Spring, synchromesh shifting key, no.3 | 1.47 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-33021 | Ring, snap | 1.05 | 1 | |
| WASHER, 5TH GEAR THRUST | ||||
| 33346-35020 | Washer, 5th gear thrust | 4.74 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.34 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
FR
Transmission
MT
Fuel
Gasoline
Engine
1TR-FE
Volume
2.00
Frame
ABF-TRY230
Produсtion years
2007
2008
2009
2010
2011
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-35120 | Gear, 2nd | 75.54 | 1 | |
| 33034-25020 | Gear, 3rd | 75.54 | 1 | |
| 33046-25020 | Gear, countershaft 5th | 104.53 | 1 | |
| 33301-25020 | Shaft, input | 83.45 | 1 | |
| 33318-35050 | Piece, gear spline, no.5 | 21.08 | 1 | |
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33336-25020 | Gear, 5th | 31.18 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33361-35040 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33369-35011 | Ring, synchronizer, no.3 | 19.52 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33392-14020 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35040 | Key, synchromesh shifting, no.3 | 5.54 | 3 | |
| 33395-35041 | Sleeve, transmission hub, no.3 | 45.68 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
| 33421-25050 | Gear, counter | 288.99 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25060 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60080 | Gear, 1st | 68.51 | 1 | |
|
33032-60081
|
Gear, 1st | 68.51 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, SYNCHRONIZER, NO.1 | ||||
| 33367-35030 | Ring, synchronizer, no.1 | 21.11 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.47 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | ||||
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| WASHER, 5TH GEAR THRUST | ||||
| 33346-35020 | Washer, 5th gear thrust | 4.74 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
4WD
FR
Transmission
MT
Fuel
NG
Engine
1TR-FPE
Volume
2.00
Frame
NBG-TRY231
Produсtion years
2007
2008
2009
2010
2011
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33033-35120 | Gear, 2nd | 75.54 | 1 | |
| 33034-25020 | Gear, 3rd | 75.54 | 1 | |
| 33046-25020 | Gear, countershaft 5th | 104.53 | 1 | |
| 33301-25020 | Shaft, input | 83.45 | 1 | |
| 33318-35050 | Piece, gear spline, no.5 | 21.08 | 1 | |
| 33321-25050 | Shaft, output | 242.43 | 1 | |
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33336-25020 | Gear, 5th | 31.18 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33361-35040 | Hub, transmission clutch, no.1 | 39.53 | 1 | |
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33369-35011 | Ring, synchronizer, no.3 | 19.52 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33392-14020 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-35040 | Key, synchromesh shifting, no.3 | 5.54 | 3 | |
| 33395-35041 | Sleeve, transmission hub, no.3 | 45.68 | 1 | |
| 33402-35060 | Gear sub-assy, reverse idler | 74.66 | 1 | |
| 33421-25050 | Gear, counter | 288.99 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 33481-25050 | Gear, speedometer drive (mtm) | 17.13 | 1 | |
| 90179-22016 | Nut | 1.93 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 1 | |
| 90363-30047 | Bearing (for output shaft rear) | 18.01 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
| GEAR, 1ST | ||||
| 33032-60080 | Gear, 1st | 68.51 | 1 | |
|
33032-60081
|
Gear, 1st | 68.51 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| RING, SYNCHRONIZER, NO.1 | ||||
| 33367-35030 | Ring, synchronizer, no.1 | 21.11 | 1 | |
|
33367-35080
|
Ring, synchronizer, no.1 | 19.47 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Truck
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1KD-FTV
Volume
3.00
Frame
LDF-KDY271
LDF-KDY281
QDF-KDY271
QDF-KDY281
Produсtion years
2011
2012
2013
2014
2015
2016
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33318-60030 | Piece, gear spline, no.5 | 26.00 | 1 | |
|
33346-71010
|
Washer, 5th gear thrust | 4.74 | 1 | |
| 33348-35010 | Washer, 1st gear thrust; Washer, 5th gear thrust | 4.74 | 1 | |
| 33365-35060 | Key, synchromesh shifting, no.1 | 1.05 | 3 | |
| 33384-60090 | Ring, synchronizer, outer no.3 | 17.68 | 1 | |
| 33391-25030 | Spring, synchromesh shifting key | 1.00 | 2 | |
| 33394-60020 | Key, synchromesh shifting, no.3 | 2.20 | 2 | |
| 33395-60050 | Sleeve, transmission hub, no.3 | 41.38 | 1 | |
|
33451-35030
|
Shaft, reverse idler gear | 8.88 | 1 | |
| 90250-05026 | Pin | 1.00 | 1 | |
|
90363-30075
|
Bearing (for output shaft rear) | 10.13 | 1 | |
| 90363-35039 | Bearing (for output shaft center) | 23.08 | 1 | |
|
90363-40050
|
Bearing (for input shaft front) | 18.01 | 1 | |
|
90364-25012
|
Bearing, input shaft | 12.34 | 1 | |
| 90364-30009 | Bearing (for counter 5th gear) | 14.90 | 1 | |
| 90364-38011 | Bearing, needle roller (for 3rd gear) | 9.85 | 1 | |
| 90364-39005 | Bearing, needle roller (for 1st gear) | 18.45 | 1 | |
| 90364-47003 | Bearing, needle roller (for 2nd gear) | 7.88 | 1 | |
|
90365-25019
|
Bearing or roller (for counter gear front) | 32.26 | 1 | |
|
90365-34005
|
Bearing | 20.21 | 1 | |
|
90501-08212
|
Spring | 1.00 | 3 | |
| 90520-56002 | Ring, counter gear front bearing snap, no.1 | 1.05 | 1 | |
| 90520-81001 | Ring, shaft snap (for output shaft bearing) | 1.67 | 1 | |
| 90520-88001 | Ring, shaft snap | 1.67 | 1 | |
| 90560-39002 | Spacer (for 1st gear bearing) | 1.14 | 1 | |
|
90561-30005
|
Spacer (for output shaft) | 5.89 | 1 | |
| 33033-60050 | Gear, 2nd | 127.52 | 1 | |
| 33301-60050 | Shaft, input | 128.24 | 1 | |
| 33034-60030 | Gear, 3rd | 53.58 | 1 | |
|
33402-60030
|
Gear sub-assy, reverse idler | 57.09 | 1 | |
| GEAR, 1ST | ||||
| 33032-60110 | Gear, 1st | 105.41 | 1 | |
| 33032-60111 | Gear, 1st | 105.41 | 1 | |
| GEAR, REVERSE | ||||
| 33331-60040 | Gear, reverse | 119.98 | 1 | |
| 33331-60041 | Gear, reverse | 65.00 | 1 | |
| SHAFT, OUTPUT | ||||
| 33321-35140 | Shaft, output | 172.23 | 1 | |
| 33321-35141 | Shaft, output | 172.23 | 1 | |
| HUB, TRANSMISSION CLUTCH, NO.1 | ||||
| 33361-60050 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| 33361-71020 | Hub, transmission clutch, no.1 | 38.82 | 1 | |
| SLEEVE, TRANSMISSION HUB, NO.2 | ||||
| 33364-35050 | Sleeve, transmission hub, no.2 | 62.31 | 1 | |
| 33364-60070 | Sleeve, transmission hub, no.2 | 38.82 | 1 | |
| KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
| 33366-35030 | Key, synchromesh shifting, no.2 | 1.99 | 3 | |
| 33366-35050 | Key, synchromesh shifting, no.2 | 1.93 | 3 | |
| HUB, TRANSMISSION CLUTCH, NO.2 | ||||
| 33362-35030 | Hub, transmission clutch, no.2 | 41.32 | 1 | |
| 33362-60030 | Hub, transmission clutch, no.2 | 27.58 | 1 | |
| GEAR, 5TH | ||||
| 33336-35100 | Gear, 5th | 49.19 | 1 | |
| 33336-35101 | Gear, 5th | 79.05 | 1 | |
| RING, SYNCHRONIZER, NO.2 | ||||
| 33368-35030 | Ring, synchronizer | 20.58 | 1 | |
|
33368-35040
|
Ring, synchronizer | 20.65 | 1 | |
| 33368-35050 | Ring, synchronizer | 15.84 | 1 | |
| 33368-35070 | Ring, synchronizer | 14.61 | 1 | |
| SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
| 33392-60020 | Spring, synchromesh shifting key, no.3 | 1.30 | 1 | |
| 33392-60030 | Spring, synchromesh shifting key, no.3 | 1.47 | 1 | |
| 33392-60040 | Spring, synchromesh shifting key, no.3 | 1.14 | 1 | |
| RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | ||||
| 90520-28031 | Ring, counter gear front bearing snap, no.2; Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28032 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28033 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28034 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28035 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28037 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28039 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28042 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28043 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28045 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28046 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28047 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28048 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28049 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28050 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28051 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| 90520-28052 | Ring, shaft snap (for output shaft bearing) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR CLUTCH HUB SET) | ||||
| 90520-30014 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30015 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for input shaft rear bearing); Ring, shaft snap (for output shaft bearing); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30016 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30017 | Ring, counter gear front bearing snap, no.1; Ring, shaft snap (for clutch hub set); Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
| 90520-30018 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30019 | Ring, shaft snap | 1.00 | 1 | |
| 90520-30020 | Ring, shaft snap (for clutch hub set) | 1.00 | 1 | |
| RING, SHAFT SNAP (FOR FRONT BEARING) | ||||
| 90520-38008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38013 | Ring, shaft snap | 1.00 | 1 | |
| 90520-38014 | Ring, shaft snap | 1.00 | 1 | |
| GEAR, COUNTERSHAFT 5TH | ||||
| 33428-60040 | Gear, countershaft 5th | 86.50 | 1 | |
| 33428-60041 | Gear, countershaft 5th | 86.50 | 1 | |
| RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | ||||
| 90520-23057 | Ring, counter gear front bearing snap | 1.00 | 1 | |
| 90520-23058 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23059 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23060 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23061 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| 90520-23062 | Ring, counter gear front bearing snap, no.2 | 1.00 | 1 | |
| GEAR, COUNTER | ||||
| 33421-60170 | Gear, counter | 164.26 | 1 | |
| 33421-71010 | Gear, counter | 164.26 | 1 | |
| 33421-71011 | Gear, counter | 164.26 | 1 | |
| RING, SHAFT SNAP (FOR BEARING) | ||||
| 90520-36007 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36008 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36009 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36010 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36011 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36012 | Ring, shaft snap | 1.00 | 1 | |
| 90520-36013 | Ring, shaft snap | 1.00 | 1 | |
| RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | ||||
| 90520-22016 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22017 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22018 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22019 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22020 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22021 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-22022 | Ring, shaft snap (for counter gear rear) | 1.00 | 1 | |
| 90520-33021 | Ring, snap | 1.05 | 1 | |
| RING SET, SYNCHRONIZER, NO.1 | ||||
| 33037-60040 | Ring set, synchronizer, no.1 | 50.12 | 1 | |
| 33037-60050 | Ring, synchronizer, no.1 | 34.34 | 1 | |
