Number | Name | Price from, USD | Required |
---|
11401-80741 | Block sub-assy, cylinder | 1,482.49 | 1 | |
11409-75071 | Guide, oil level gage | 8.17 | 1 | |
12101-75140 | Pan sub-assy, oil | 94.86 | 1 | |
12102-75010 | Pan sub-assy, oil, no.2 | 60.62 | 1 | |
12581-75030 | Insulator, cylinder block, no.1 | 33.06 | 1 | |
15301-75091 | Gage sub-assy, oil level | 7.62 | 1 | |
90110-06036 | - | 1.00 | - | |
90126-06015 | Bolt, stud (for oil pan) | 1.00 | 2 | |
90126-08052 | Bolt, stud | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90179-08087 | Nut(for rear suspension support) | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11005 | Pin, ring | 1.00 | 3 | |
90253-14004 | Pin, straight | 3.19 | 2 | |
90253-15001 | Pin | 1.00 | 2 | |
90341-12012 | Plug | 1.26 | 1 | |
90345-53009 | Plug | 1.98 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02179 | Bolt(for crankshaft bearing cap set) | 1.98 | 10 | |
90910-09087 | Plug | 1.89 | 1 | |
90910-09118 | Cock sub-assy, water drain (for cylinder block) | 4.13 | 1 | |
91551-00820 | Bolt | 1.00 | - | |
91551-00840 | Bolt | 1.00 | - | |
91641-80818 | Bolt | 1.00 | - | |
91673-80614 | Bolt | 1.00 | - | |
96411-63000 | Plug, tight | 1.71 | 1 | |
96411-63500 | Plug, tight | 1.71 | 8 | |
96411-64000 | Plug, tight | 1.71 | 3 | |
NOZZLE SUB-ASSY, OIL, NO.1 | ||||
15708-75010 | Nozzle sub-assy, oil, no.1 | 10.42 | 4 | |
15708-75020 | Nozzle sub-assy, oil, no.1 | 4.79 | 4 | |
Subschemes | ||||
CRANKSHAFT & PISTON |
Number | Name | Price from, USD | Required |
---|
11401-49755 | Block sub-assy, cylinder | 2,614.29 | 1 | |
11409-48010 | Guide, oil level gage | 14.55 | 1 | |
11429-56011 | Plate, cylinder block stiffening | 61.99 | 1 | |
12101-58170 | Pan sub-assy, oil | 211.12 | 1 | |
15301-58060 | Gage sub-assy, oil level | 6.83 | 1 | |
15605-56010 | Valve sub-assy, oil check | 20.48 | 1 | |
15708-58040 | Nozzle sub-assy, oil, no.1 | 8.62 | 4 | |
15797-58020 | Bolt, oil nozzle union | 2.43 | 4 | |
90250-08120 | Pin, straight | 1.00 | 2 | |
90253-15008 | Pin, straight (for cylinder head set) | 1.00 | 2 | |
90331-14006 | Plug, tight | 1.00 | 3 | |
90331-50003 | Plug, tight, no.2 (for cylinder block) | 1.89 | 1 | |
90341-12012 | Plug | 1.26 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-18012 | Gasket | 1.17 | - | |
90910-09087 | Plug | 1.89 | 1 | |
90910-09095 | Cock sub-assy, water drain (for cylinder block) | 3.77 | 1 | |
90915-01015 | Nozzle, oil | 4.31 | 1 | |
91621-B0816 | Bolt | 1.00 | - | |
94130-60800 | Nut | 1.00 | - | |
96411-63500 | Plug, tight | 1.71 | 5 | |
96741-19005 | Ring, o (for oil level gage) | 1.17 | 1 | |
BOLT(FOR CRANKSHAFT BEARING CAP SET) | ||||
90910-02082 | Bolt (for crankshaft bearing cap set) | 3.41 | 5 | |
90910-02083 | Bolt (for crankshaft bearing cap set) | 3.95 | 5 | |
Subschemes | ||||
CRANKSHAFT & PISTON |
Number | Name | Price from, USD | Required |
---|
90116-08194 | Bolt, double sided | 1.00 | - | |
90119-08505 | Bolt | 1.00 | - | |
90179-08040 | Nut | 1.00 | - | |
90250-08120 | Pin, straight | 1.00 | 4 | |
90345-51007 | Plug, w/head taper screw, no.1 | 1.00 | 3 | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 1.89 | 1 | |
90345-53004 | Plug, w/head taper screw, no.2 | 1.71 | 1 | |
96411-63000 | Plug, tight | 1.71 | 4 | |
96411-63500 | Plug, tight | 1.71 | 5 | |
96411-64500 | Plug, tight | 2.34 | 1 | |
96411-65000 | Plug, tight | 1.98 | 4 | |
Subschemes | ||||
CAMSHAFT & VALVE | ||||
SWITCH & RELAY & COMPUTER |