Number | Name | Price from, USD | Required |
---|
11361-28010 | Cover, flywheel housing under | 3.68 | 1 | |
12101-28050 | Pan sub-assy, oil | 88.00 | 1 | |
15678-28010 | Filter, oil control valve | 3.63 | 1 | |
90105-08439 | - | 1.50 | - | |
90119-06848 | Bolt | 1.00 | - | |
90126-06015 | Bolt, stud (for oil pan) | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | - | |
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.21 | 10 | |
90253-14003 | Pin | 1.00 | 2 | |
90311-89003 | Seal, engine rear oil | Discontinued | 1 | |
90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.06 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02124 | Bolt (for crankshaft bearing cap set) | 1.76 | 10 | |
90910-09087 | Plug | 1.85 | 1 | |
90910-09120 | Cock assy, drain(for oil filter bracket); Cock sub-assy, water drain (for cylinder block) | 5.37 | 1 | |
91512-81032 | Bolt | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
91631-G0614 | Bolt, hood hinge | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96761-24020 | Gasket | 1.69 | - | |
11410-29115 | Block sub-assy, cylinder | 1,812.89 | 1 | |
PIN, STRAIGHT(FOR TIMING GEAR COVER SET) | ||||
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 2 | |
CRANKCASE ASSY, STIFFENING | ||||
11421-28020 | Crankcase assy, stiffening | 478.74 | 1 | |
11421-28900 | Crankcase assy, stiffening | 435.62 | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-28020 | Gage sub-assy, oil level | 8.14 | 1 | |
15301-28050 | Gage sub-assy, oil level | 9.41 | 1 | |
15301-28051 | Gage sub-assy, oil level | 9.41 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-28010 | Guide, oil level gage | 16.81 | 1 | |
11452-28011 | Guide, oil level gage | 17.07 | 1 | |
GASKET, STRAIGHT SCREW PLUG NO.1(FOR CYLINDER BLOCK) | ||||
90430-14009 | Gasket | 1.00 | 1 | |
90430-14011 | Gasket | 1.00 | 1 | |
PLUG(FOR OIL PAN DRAIN) | ||||
90341-12012 | Plug | 1.41 | 1 | |
90341-12026 | Plug | 2.89 | 1 | |
Subschemes | ||||
SWITCH & RELAY & COMPUTER |
Number | Name | Price from, USD | Required |
---|
11361-28010 | Cover, flywheel housing under | 3.68 | 1 | |
12101-28050 | Pan sub-assy, oil | 88.00 | 1 | |
15678-28010 | Filter, oil control valve | 3.63 | 1 | |
90105-08439 | - | 1.50 | - | |
90119-06848 | Bolt | 1.00 | - | |
90126-06015 | Bolt, stud (for oil pan) | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | - | |
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.21 | 10 | |
90253-14003 | Pin | 1.00 | 2 | |
90311-89003 | Seal, engine rear oil | Discontinued | 1 | |
90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.06 | 1 | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 2.02 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90910-02124 | Bolt (for crankshaft bearing cap set) | 1.76 | 10 | |
90910-09087 | Plug | 1.85 | 1 | |
90910-09120 | Cock assy, drain(for oil filter bracket); Cock sub-assy, water drain (for cylinder block) | 5.37 | 1 | |
91512-81032 | Bolt | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
91631-G0614 | Bolt, hood hinge | 1.00 | - | |
96721-19010 | Ring, o | 1.12 | 1 | |
96761-24020 | Gasket | 1.69 | - | |
11410-29115 | Block sub-assy, cylinder | 1,812.89 | 1 | |
PIN, STRAIGHT(FOR TIMING GEAR COVER SET) | ||||
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 2 | |
CRANKCASE ASSY, STIFFENING | ||||
11421-28020 | Crankcase assy, stiffening | 478.74 | 1 | |
11421-28900 | Crankcase assy, stiffening | 435.62 | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-28020 | Gage sub-assy, oil level | 8.14 | 1 | |
15301-28050 | Gage sub-assy, oil level | 9.41 | 1 | |
15301-28051 | Gage sub-assy, oil level | 9.41 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-28010 | Guide, oil level gage | 16.81 | 1 | |
11452-28011 | Guide, oil level gage | 17.07 | 1 | |
GASKET, STRAIGHT SCREW PLUG NO.1(FOR CYLINDER BLOCK) | ||||
90430-14009 | Gasket | 1.00 | 1 | |
90430-14011 | Gasket | 1.00 | 1 | |
PLUG(FOR OIL PAN DRAIN) | ||||
90341-12012 | Plug | 1.41 | 1 | |
90341-12026 | Plug | 2.89 | 1 | |
Subschemes | ||||
SWITCH & RELAY & COMPUTER |
Number | Name | Price from, USD | Required |
---|
11401-29705 | Block sub-assy, cylinder | 1,733.69 | 1 | |
11448-64010 | Orifice, cylinder block oil | 1.76 | 1 | |
11452-27030 | Guide, oil level gage | 19.54 | 1 | |
12102-27030 | Pan sub-assy, oil, no.2 | 146.09 | 1 | |
12156-27020 | Insulator, oil pan | 15.66 | 1 | |
15301-27040 | Gage sub-assy, oil level | 9.77 | 1 | |
15310-27020 | Regulator assy, oil | 46.64 | 1 | |
15703-27010 | Valve sub-assy, oil check | 15.22 | 1 | |
90105-06055 | - | 1.06 | - | |
90110-06034 | - | 1.00 | - | |
90116-06164 | Bolt, stud (for oil pan) | 1.00 | 3 | |
90119-06775 | Bolt | 1.14 | - | |
90179-06299 | Nut, wire adjusting | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-06068 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-11021 | Pin, ring | 1.03 | - | |
90253-14004 | Pin, straight | 3.42 | 2 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-14235 | Gasket | 2.02 | - | |
90910-02135 | Bolt (for crankshaft bearing cap set) | 3.17 | 10 | |
90910-09075 | Cock sub-assy, water drain (for cylinder block) | 3.26 | 1 | |
90910-09087 | Plug | 1.85 | 1 | |
91511-60612 | Bolt | 1.00 | - | |
91511-B0825 | Bolt | 1.00 | - | |
91511-B0830 | Bolt | 1.00 | - | |
91511-B0850 | Bolt (for cylinder head cover) | 1.32 | - | |
91511-J0625 | Bolt (for cylinder head cover) | 1.00 | - | |
91512-61040 | Bolt | 1.76 | - | |
91513-80635 | - | 1.00 | - | |
91621-B0816 | Bolt | 1.00 | - | |
91642-81045 | Bolt | 3.70 | - | |
91643-80622 | Bolt | 1.00 | - | |
91645-80620 | - | 1.00 | - | |
92122-61060 | - | 2.11 | - | |
96411-41800 | Plug | 1.00 | 4 | |
96411-63000 | Plug, tight | 1.85 | 3 | |
96411-63500 | Plug, tight | 2.03 | 4 | |
96721-24023 | Gasket | 1.94 | - | |
96741-19010 | Ring, o | 1.57 | - | |
NOZZLE SUB-ASSY, OIL, NO.1 | ||||
15790-27010 | Nozzle, sub-assy oil, no.1 | 16.54 | 4 | |
15790-27020 | Nozzle, sub-assy oil, no.1 | 16.54 | 4 | |
PAN SUB-ASSY, OIL | ||||
12101-27010 | Pan sub-assy, oil | 464.66 | 1 | |
12101-27011 | Pan sub-assy, oil | 367.64 | 1 | |
PLUG(FOR OIL PAN DRAIN) | ||||
90341-12012 | Plug | 1.41 | 1 | |
90341-12026 | Plug | 2.89 | 1 | |
FLANGE(FOR WATER BY-PASS) | ||||
16353-27010 | Flange (for water by-pass) | 14.26 | 1 | |
16353-27011 | Flange (for water by-pass) | 13.99 | 1 |