Number | Name | Price from, USD | Required |
---|
11401-79179 | Block sub-assy, cylinder | 1,761.34 | 1 | |
11452-88362 | Guide, oil level gage | Discontinued | 1 | |
12101-74050 | Pan sub-assy, oil | 248.92 | 1 | |
12123-74040 | Plate, oil pan baffle, no.1 | 23.45 | 1 | |
15301-88364 | Gage sub-assy, oil level | Discontinued | 1 | |
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90116-06022 | Bolt, stud | 1.08 | 2 | |
90119-06684 | Bolt | 1.00 | - | |
90119-06727 | Bolt | 1.00 | - | |
90179-06045 | Nut | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 4 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.00 | 2 | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
90430-12027 | Gasket | 1.00 | 1 | |
PLUG, W/HEAD TAPER SCREW, NO.5 | ||||
90344-53006 | Plug | 1.46 | 2 | |
90344-53008 | Plug | 1.00 | 2 | |
90344-53015 | Plug | 2.43 | 2 | |
PLUG(FOR OIL PAN DRAIN) | ||||
90341-12012 | Plug | 1.26 | 1 | |
90341-12026 | Plug | 2.71 | 1 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90119-06684 | Bolt | 1.00 | - | |
90119-06727 | Bolt | 1.00 | - | |
90179-06045 | Nut | 1.00 | - | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.00 | 2 | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-79179 | Block sub-assy, cylinder | 1,761.34 | 1 | |
11401-79645 | Block sub-assy, cylinder | 1,788.29 | 1 | |
PAN SUB-ASSY, OIL | ||||
12101-74050 | Pan sub-assy, oil | 248.92 | 1 | |
12101-88460 | Pan sub-assy, oil | Discontinued | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-88364 | Gage sub-assy, oil level | Discontinued | 1 | |
15301-88461 | Gage sub-assy, oil level | Discontinued | 1 | |
GASKET(FOR OIL PAN DRAIN PLUG) | ||||
90430-12027 | Gasket | 1.00 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-88362 | Guide, oil level gage | Discontinued | 1 | |
11452-88461 | Guide, oil level gage | Discontinued | 1 | |
PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL) | ||||
90250-06003 | Pin, straight | 1.00 | 4 | |
90250-06015 | Pin, straight | 1.00 | 2 | |
PLUG, W/HEAD TAPER SCREW, NO.5 | ||||
90344-53006 | Plug | 1.46 | 2 | |
90344-53015 | Plug | 2.43 | 2 | |
PLATE, OIL PAN BAFFLE, NO.1 | ||||
12121-88461 | Plate, oil pan baffle, no.1 | 50.32 | 1 | |
12123-74040 | Plate, oil pan baffle, no.1 | 23.45 | 1 | |
BOLT, STUD(FOR OIL PAN) | ||||
90116-06022 | Bolt, stud | 1.08 | 2 | |
90116-06048 | Bolt, stud | 1.00 | 2 | |
PLUG(FOR OIL PAN DRAIN) | ||||
90341-12012 | Plug | 1.26 | 1 | |
90341-12026 | Plug | 2.71 | 1 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
90119-06684 | Bolt | 1.00 | - | |
90119-06727 | Bolt | 1.00 | - | |
90179-06045 | Nut | 1.00 | - | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
12102-88460 | Pan sub-assy, oil, no.2 | 104.24 | 1 | |
15790-88460 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90110-06003 | Bolt | 1.00 | - | |
90116-06127 | Bolt, stud | 1.00 | - | |
90119-06624 | Bolt | 1.26 | - | |
90179-06257 | Nut | 1.00 | - | |
90179-06299 | Nut, wire adjusting | 1.00 | - | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13004 | Pin, ring | 1.98 | 2 | |
90253-13017 | Pin | 1.00 | 2 | |
90341-12026 | Plug | 2.71 | 1 | |
90344-53015 | Plug | 2.43 | - | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 1.89 | 1 | |
90405-10034 | Union (for oil level gage guide) | 2.97 | 1 | |
90406-14003 | Pipe, metal | 1.26 | - | |
90901-10004 | Bolt | 1.00 | - | |
91513-K0620 | Bolt | 1.00 | - | |
91513-K0825 | Bolt | 1.08 | - | |
91641-80612 | Bolt | 1.00 | - | |
91643-H0822 | Bolt | 1.08 | - | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
96741-19010 | Ring, o | 1.46 | - | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-79179 | Block sub-assy, cylinder | 1,761.34 | 1 | |
11401-79645 | Block sub-assy, cylinder | 1,788.29 | 1 | |
PAN SUB-ASSY, OIL | ||||
12101-74050 | Pan sub-assy, oil | 248.92 | 1 | |
12101-88460 | Pan sub-assy, oil | Discontinued | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-88364 | Gage sub-assy, oil level | Discontinued | 1 | |
15301-88461 | Gage sub-assy, oil level | Discontinued | 1 | |
GASKET(FOR OIL PAN DRAIN PLUG) | ||||
90430-12027 | Gasket | 1.00 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-88362 | Guide, oil level gage | Discontinued | 1 | |
11452-88461 | Guide, oil level gage | Discontinued | 1 | |
PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL) | ||||
90250-06003 | Pin, straight | 1.00 | 4 | |
90250-06015 | Pin, straight | 1.00 | 2 | |
PLUG, W/HEAD TAPER SCREW, NO.5 | ||||
90344-53006 | Plug | 1.46 | 2 | |
90344-53015 | Plug | 2.43 | 2 | |
PLATE, OIL PAN BAFFLE, NO.1 | ||||
12121-88461 | Plate, oil pan baffle, no.1 | 50.32 | 1 | |
12123-74040 | Plate, oil pan baffle, no.1 | 23.45 | 1 | |
BOLT, STUD(FOR OIL PAN) | ||||
90116-06022 | Bolt, stud | 1.08 | 2 | |
90116-06048 | Bolt, stud | 1.00 | 2 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
11452-88461 | Guide, oil level gage | Discontinued | 1 | |
15301-88461 | Gage sub-assy, oil level | Discontinued | 1 | |
15790-88460 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90110-06003 | Bolt | 1.00 | - | |
90116-06048 | Bolt, stud | 1.00 | 2 | |
90116-06127 | Bolt, stud | 1.00 | - | |
90119-06624 | Bolt | 1.26 | - | |
90179-06257 | Nut | 1.00 | - | |
90179-06299 | Nut, wire adjusting | 1.00 | - | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13004 | Pin, ring | 1.98 | 2 | |
90253-13017 | Pin | 1.00 | 2 | |
90341-12026 | Plug | 2.71 | 1 | |
90344-53015 | Plug | 2.43 | - | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 1.89 | 1 | |
90405-10034 | Union (for oil level gage guide) | 2.97 | 1 | |
90406-14003 | Pipe, metal | 1.26 | - | |
90430-12031 | Gasket | 1.00 | 1 | |
90901-10004 | Bolt | 1.00 | - | |
91513-K0620 | Bolt | 1.00 | - | |
91513-K0825 | Bolt | 1.08 | - | |
91641-80612 | Bolt | 1.00 | - | |
91643-H0822 | Bolt | 1.08 | - | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
96741-19010 | Ring, o | 1.46 | - | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-79645 | Block sub-assy, cylinder | 1,788.29 | 1 | |
11401-80696 | Block sub-assy, cylinder | 1,779.31 | 1 | |
PAN SUB-ASSY, OIL | ||||
12101-88460 | Pan sub-assy, oil | Discontinued | 1 | |
12101-88560 | Pan sub-assy, oil | Discontinued | 1 | |
PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL) | ||||
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-06015 | Pin, straight | 1.00 | 2 | |
PLATE, OIL PAN BAFFLE, NO.1 | ||||
12121-88461 | Plate, oil pan baffle, no.1 | 50.32 | 1 | |
12121-88561 | Plate, oil pan baffle, no.1 | 42.51 | 1 | |
PAN SUB-ASSY, OIL, NO.2 | ||||
12102-88460 | Pan sub-assy, oil, no.2 | 104.24 | 1 | |
12102-88560 | Pan sub-assy, oil, no.2 | Discontinued | 1 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
90110-06003 | Bolt | 1.00 | - | |
90116-06127 | Bolt, stud | 1.00 | - | |
90119-06624 | Bolt | 1.26 | - | |
90179-06257 | Nut | 1.00 | - | |
90179-06299 | Nut, wire adjusting | 1.00 | - | |
90344-53015 | Plug | 2.43 | - | |
90406-14003 | Pipe, metal | 1.26 | - | |
90901-10004 | Bolt | 1.00 | - | |
91513-K0620 | Bolt | 1.00 | - | |
91513-K0825 | Bolt | 1.08 | - | |
91641-80612 | Bolt | 1.00 | - | |
91643-H0822 | Bolt | 1.08 | - | |
96741-19010 | Ring, o | 1.46 | - | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
11452-88461 | Guide, oil level gage | Discontinued | 1 | |
15301-88461 | Gage sub-assy, oil level | Discontinued | 1 | |
15790-88460 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
90105-06202 | Bolt (for cylinder head cover) | 1.00 | - | |
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90110-06003 | Bolt | 1.00 | - | |
90116-06048 | Bolt, stud | 1.00 | 2 | |
90116-06079 | Bolt | 1.08 | - | |
90116-06127 | Bolt, stud | 1.00 | - | |
90119-06624 | Bolt | 1.26 | - | |
90119-08B60 | Bolt | 1.00 | - | |
90179-06257 | Nut | 1.00 | - | |
90179-06299 | Nut, wire adjusting | 1.00 | - | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13004 | Pin, ring | 1.98 | 2 | |
90253-13017 | Pin | 1.00 | 2 | |
90341-12026 | Plug | 2.71 | 1 | |
90344-53015 | Plug | 2.43 | - | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 1.89 | 1 | |
90405-10034 | Union (for oil level gage guide) | 2.97 | 1 | |
90406-14003 | Pipe, metal | 1.26 | - | |
90430-12031 | Gasket | 1.00 | 1 | |
90901-10004 | Bolt | 1.00 | - | |
91513-K0620 | Bolt | 1.00 | - | |
91513-K0825 | Bolt | 1.08 | - | |
91641-80612 | Bolt | 1.00 | - | |
91643-H0822 | Bolt | 1.08 | - | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
96741-19010 | Ring, o | 1.46 | - | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-79645 | Block sub-assy, cylinder | 1,788.29 | 1 | |
11401-80016 | Block sub-assy, cylinder | 1,788.29 | 1 | |
11401-80696 | Block sub-assy, cylinder | 1,779.31 | 1 | |
PAN SUB-ASSY, OIL | ||||
12101-88460 | Pan sub-assy, oil | Discontinued | 1 | |
12101-88560 | Pan sub-assy, oil | Discontinued | 1 | |
PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL) | ||||
90250-06003 | Pin, straight | 1.00 | 2 | |
90250-06015 | Pin, straight | 1.00 | 2 | |
PLATE, OIL PAN BAFFLE, NO.1 | ||||
12121-88461 | Plate, oil pan baffle, no.1 | 50.32 | 1 | |
12121-88561 | Plate, oil pan baffle, no.1 | 42.51 | 1 | |
12121-88563 | Plate, oil pan baffle, no.1 | 42.51 | 1 | |
PAN SUB-ASSY, OIL, NO.2 | ||||
12102-88460 | Pan sub-assy, oil, no.2 | 104.24 | 1 | |
12102-88560 | Pan sub-assy, oil, no.2 | Discontinued | 1 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
90105-06202 | Bolt (for cylinder head cover) | 1.00 | - | |
90110-06003 | Bolt | 1.00 | - | |
90116-06079 | Bolt | 1.08 | - | |
90116-06127 | Bolt, stud | 1.00 | - | |
90119-06624 | Bolt | 1.26 | - | |
90119-08B60 | Bolt | 1.00 | - | |
90179-06257 | Nut | 1.00 | - | |
90179-06299 | Nut, wire adjusting | 1.00 | - | |
90344-53015 | Plug | 2.43 | - | |
90406-14003 | Pipe, metal | 1.26 | - | |
90901-10004 | Bolt | 1.00 | - | |
91513-K0620 | Bolt | 1.00 | - | |
91513-K0825 | Bolt | 1.08 | - | |
91641-80612 | Bolt | 1.00 | - | |
91643-H0822 | Bolt | 1.08 | - | |
96741-19010 | Ring, o | 1.46 | - | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP |
Number | Name | Price from, USD | Required |
---|
12123-88360 | Plate, oil pan baffle | Discontinued | 1 | |
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90110-06003 | Bolt | 1.00 | - | |
90119-06167 | Bolt | 1.00 | - | |
90179-06257 | Nut | 1.00 | - | |
90253-13017 | Pin | 1.00 | 2 | |
90404-28002 | - | Discontinued | - | |
90430-28003 | Gasket | Discontinued | - | |
91651-60820 | Bolt | 1.00 | - | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
96732-19010 | Gasket | Discontinued | - | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 1.89 | 1 | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90344-53015 | Plug | 2.43 | 2 | |
90341-12026 | Plug | 2.71 | 1 | |
90405-10034 | Union (for oil level gage guide) | 2.97 | 1 | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-79455 | Block sub-assy, cylinder | 1,797.28 | 1 | |
11401-79456 | Block sub-assy, cylinder | 1,779.31 | 1 | |
11401-79675 | Block sub-assy, cylinder | Discontinued | 1 | |
11401-79695 | Block sub-assy, cylinder | 1,779.31 | 1 | |
NOZZLE SUB-ASSY, OIL, NO.1 | ||||
15790-88381 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
15790-88460 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
PAN SUB-ASSY, OIL | ||||
12101-74060 | Pan sub-assy, oil | 248.02 | 1 | |
12101-88480 | Pan sub-assy, oil | Discontinued | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-88382 | Gage sub-assy, oil level | Discontinued | 1 | |
15301-88461 | Gage sub-assy, oil level | Discontinued | 1 | |
GASKET(FOR OIL PAN DRAIN PLUG) | ||||
90430-12027 | Gasket | 1.00 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-88382 | Guide, oil level gage | Discontinued | 1 | |
11452-88461 | Guide, oil level gage | Discontinued | 1 | |
BOLT, STUD(FOR OIL PAN) | ||||
90116-06048 | Bolt, stud | 1.00 | 2 | |
90116-06119 | Bolt, stud | 1.08 | 2 | |
PIN, STRAIGHT(FOR CLUTCH HOUSING SET) | ||||
90250-06015 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP | ||||
RADIATOR & WATER OUTLET |
Number | Name | Price from, USD | Required |
---|
11452-88382 | Guide, oil level gage | Discontinued | 1 | |
12101-74060 | Pan sub-assy, oil | 248.02 | 1 | |
12123-88360 | Plate, oil pan baffle | Discontinued | 1 | |
15301-88382 | Gage sub-assy, oil level | Discontinued | 1 | |
90105-10028 | Bolt (for crankshaft bearing cap set) | 1.98 | 10 | |
90110-06003 | Bolt | 1.00 | - | |
90116-06119 | Bolt, stud | 1.08 | 2 | |
90119-06167 | Bolt | 1.00 | - | |
90179-06257 | Nut | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.00 | 2 | |
90345-52001 | Cock sub-assy, water drain (for cylinder block) | 1.89 | 1 | |
90404-28002 | - | Discontinued | - | |
90405-10034 | Union (for oil level gage guide) | 2.97 | 1 | |
90430-28003 | Gasket | Discontinued | - | |
91651-60820 | Bolt | 1.00 | - | |
96411-43500 | Plug | 2.16 | 8 | |
96411-44000 | Plug | 2.34 | 1 | |
96732-19010 | Gasket | Discontinued | - | |
90344-53015 | Plug | 2.43 | 2 | |
BLOCK SUB-ASSY, CYLINDER | ||||
11401-79455 | Block sub-assy, cylinder | 1,797.28 | 1 | |
11401-79456 | Block sub-assy, cylinder | 1,779.31 | 1 | |
NOZZLE SUB-ASSY, OIL, NO.1 | ||||
15790-88380 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
15790-88381 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
GASKET(FOR OIL PAN DRAIN PLUG) | ||||
90430-12019 | Gasket | 1.00 | 1 | |
90430-12027 | Gasket | 1.00 | 1 | |
PLUG(FOR OIL PAN DRAIN) | ||||
90341-12012 | Plug | 1.26 | 1 | |
90341-12026 | Plug | 2.71 | 1 | |
PIN, STRAIGHT(FOR CLUTCH HOUSING SET) | ||||
90250-06015 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
Subschemes | ||||
CRANKSHAFT & PISTON | ||||
ENGINE OIL PUMP | ||||
RADIATOR & WATER OUTLET |