Number | Name | Price from, USD | Required |
---|
21215-P0Z-000 | Holder, idle shaft | Discontinued | 1 | |
23421-P7W-000 | Gear, countershaft low | 84.67 | 1 | |
23427-P7W-000 | Gear, parking | 71.04 | 1 | |
23441-PGS-000 | - | 75.10 | 1 | |
23451-P7W-000 | Gear, countershaft third | 69.01 | 1 | |
23471-PFY-000 | - | 57.24 | 1 | |
23491-PFY-000 | - | 54.81 | 1 | |
23531-P7Z-000 | Gear, countershaft reverse | 63.30 | 1 | |
23541-P0Z-000 | Gear, reverse idle | 41.93 | 1 | |
23542-P7T-000 | Shaft, reverse idle gear | 6.08 | 1 | |
23565-P0Z-000 | Selector, reverse gear | 33.54 | 1 | |
23566-P0Z-010 | Hub, selector | 29.59 | 1 | |
90203-P0Z-000 | Nut, flange, 24mm (left hand thread) | 5.43 | 1 | |
90401-P0Z-000 | Washer, thrust 14x30x1 | 2.14 | 1 | |
90402-P0Z-000 | Washer, spring 24mm | 4.03 | 1 | |
90408-PY4-000 | Washer, thrust 14x30x1 | 1.93 | 1 | |
90431-P6H-000 | Cotter, 31mm | 1.10 | 4 | |
90441-PGH-000 | Collar, 35x47x45 | 9.29 | 1 | |
90445-PGH-000 | Collar, 35x47x7.8 | 7.48 | 1 | |
90614-P0Z-000 | Ring, snap 35mm | 1.00 | 1 | |
91022-P0Z-013 | Bearing, thrust needle, 42x67x3.5 | 4.06 | 2 | |
91024-PAX-006 | Bearing, needle 40x46x14.5 | 5.28 | 1 | |
91025-P24-006 | Bearing, needle 14x18x15 | 3.17 | 2 | |
91028-P0Z-013 | Bearing, needle 35x41x25.8 | 5.35 | 1 | |
91035-PAX-006 | Bearing, needle 42x50x19 | 5.68 | 1 | |
91308-PW4-003 | O-ring 21.8x1.9 | 1.00 | 2 | |
95701-080-3208 | Bolt, flange 8x32 | 1.00 | 2 | |
2 | ||||
23220-P7W-020 | - | 179.44 | 1 | |
23220-P7W-030 | - | 179.44 | 1 | |
21 | ||||
90520-P7W-000 | Washer a, 31x63.5x8.5 | 12.99 | 1 | |
90521-P7W-000 | Washer b, 31x63.5x8.5 | 12.99 | 1 | |
90522-P7W-000 | Washer c, 31x63.5x8.5 | 12.99 | 1 | |
90523-P7W-000 | Washer d, 31x63.5x8.5 | 12.99 | 1 |