Clutch & band servo (unit) for Nissan Cube Z10, 1 generation 02.1998 - 08.2000
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
F
S
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CG13DE
Volume
1.30
Frame
GF-Z10
Produсtion years
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00922-50510 | Pin | 1.00 | - | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31506-31X01 | Ring, snap | 1.24 | 1 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.12 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.12 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.12 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.12 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.12 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31527-31X62 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-31X63 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-31X70 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31605-31X19 | Spring, servo | 2.12 | 1 | |
| 31611-31X07 | Retainer, servo piston | 24.19 | 1 | |
| 31615-31X01 | Piston, band servo | 18.71 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
|
31625-31X01
|
Pin, anchor end | 2.12 | 1 | |
| 31630-31X01 | Band assembly, brake | 46.11 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
| 31675-31X01 | Piston, accumulator | 6.07 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31691-31X00 | Retainer, servo piston | 25.28 | 1 | |
| stem, band servo piston | ||||
| 31618-31X01 | Stem, band servo piston | 4.60 | 1 | |
| 31618-31X03 | Stem, band servo piston | 4.61 | 1 | |
| piston, over drive servo | ||||
| 31695-31X00 | Piston, over drive servo; Piston-overdrive servo | 8.04 | 1 | |
| 31695-31X07 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
F
S
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CG13DE
Volume
1.30
Frame
GF-Z10
Produсtion years
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31412-31X10 | High clutch drum & input shaft | 62.33 | 1 | |
| 31505-31X02 | Spring, piston return | 3.14 | 16 | |
| 31505-31X03 | Spring, piston return | 3.14 | 16 | |
| 31506-31X03 | Ring, snap overrun clutch | 1.24 | 1 | |
| 31506-31X04 | Ring, snap forward clutch | 1.00 | 1 | |
| 31506-31X05 | Ring, snap forward clutch | 2.70 | 1 | |
| 31506-31X06 | Ring, snap | 3.15 | 1 | |
| 31506-31X07 | Ring, snap | 1.00 | 1 | |
| 31506-31X08 | Ring, snap clutch drum | 3.15 | 1 | |
| 31506-31X09 | Ring, snap | 2.12 | 1 | |
| 31521-31X00 | Retainer, spring | 2.12 | 1 | |
| 31521-31X01 | Retainer, spring | 4.09 | 1 | |
| 31522-31X02 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 2.12 | 1 | |
| 31525-31X02 | Seal,o ring | 5.48 | 3 | |
| 31526-31X01 | Seal,o ring | 2.12 | 1 | |
| 31527-31X01 | Seal,???? cut ring; Seal-lathe cut ring | 3.14 | 1 | |
| 31527-31X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.61 | 1 | |
| 31527-31X03 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31527-31X73 | Seal,???? cut ring; Seal-lathe cut ring | 2.12 | 1 | |
| 31528-21X10 | Seal, lip | 4.46 | 1 | |
| 31528-31X01 | Seal, lip | 5.48 | 1 | |
| 31528-31X02 | Seal, lip | 4.09 | 1 | |
| 31528-31X03 | Seal, lip | 4.09 | 1 | |
| 31532-31X02 | Plate | 13.22 | 5 | |
| 31532-31X13 | Plate assembly, drive | 14.54 | 3 | |
| 31535-31X02 | Plate, dished | 9.86 | 1 | |
| 31535-31X03 | Plate, dished | 2.63 | 1 | |
| 31536-31X14 | Plate, driven | 2.63 | 5 | |
| 31536-31X16 | Plate, driven | 2.63 | 4 | |
| 31544-31X03 | Piston assembly, high clutch | 17.98 | 1 | |
| 31570-31X18 | Clutch | 242.60 | 1 | |
| 31571-31X08 | Drum assembly, forward clutch; Drum assembly-foward clutch | 168.80 | 1 | |
| 31575-31X02 | Piston, forward clutch; Piston-foward clutch | 13.81 | 1 | |
| 31584-31X01 | Piston assembly, overrun clutch | 12.57 | 1 | |
| piston assembly, clutch | ||||
| 31514-31X01 | Piston assembly, clutch | 42.38 | 1 | |
| 31514-31X02 | Piston assembly, clutch | 42.38 | 1 | |
| drum, reverse clutch | ||||
| 31511-31X03 | Drum, reverse clutch | 80.38 | 1 | |
| 31511-31X05 | Drum, reverse clutch | 80.38 | 1 | |
| plate, retaining | ||||
| 31537-31X00 | Plate, retaining | 8.99 | 1 | |
| 31537-31X01 | Plate, retaining | 8.99 | 1 | |
| 31537-31X02 | Plate, retaining | 8.99 | 1 | |
| 31537-31X03 | Plate, retaining | 8.99 | 1 | |
| 31537-31X04 | Plate, retaining | 8.99 | 1 | |
| plate assembly, drive | ||||
| 31532-31X12 | Plate assembly, drive | 9.86 | 2 | |
| 31532-31X18 | Plate assembly, drive | 8.99 | 2 | |
| plate, driven | ||||
| 31536-31X15 | Plate, driven | 5.48 | 2 | |
| 31536-31X21 | Plate, driven | 5.48 | 2 | |
| plate, dished | ||||
| 31535-31X11 | Plate, dished | 6.07 | 2 | |
| 31535-31X13 | Plate, dished | 5.48 | 2 | |
| clutch assembly, reverse | ||||
| 31510-31X13 | Clutch assembly, reverse | 169.53 | 1 | |
| 31510-31X17 | Clutch assembly, reverse | 169.53 | 1 | |
| 31510-31X20 | Clutch assembly, reverse | 154.19 | 1 | |
| 31510-31X61 | Clutch assembly, reverse | 154.19 | 1 | |
| 31510-31X67 | Clutch assembly, reverse | 154.19 | 1 | |
| plate, retaining | ||||
| 31537-32X00 | Plate, retaining | 8.99 | 1 | |
| 31537-32X01 | Plate, retaining | 8.99 | 1 | |
| 31537-32X02 | Plate, retaining | 8.99 | 1 | |
| 31537-32X03 | Plate, retaining | 8.99 | 1 | |
| 31537-32X04 | Plate, retaining | 8.99 | 1 | |
| 31537-32X05 | Plate, retaining | 8.99 | 1 | |
| 31537-32X12 | Plate, retaining | 8.99 | 1 | |
| plate assembly, drive | ||||
| 31532-31X01 | Plate assembly, drive | 6.36 | 3 | |
| 31532-31X19 | Plate assembly, drive | 6.35 | 3 | |
| plate, driven | ||||
| 31536-31X12 | Plate, driven | 5.77 | 5 | |
| 31536-31X19 | Plate, driven | 5.92 | 5 | |
| high clutch & input shaft assembly | ||||
| 31410-32X14 | High clutch & input shaft assembly | 218.49 | 1 | |
| 31410-32X76 | High clutch & input shaft assembly | 179.03 | 1 | |
| plate, retaining | ||||
| 31537-31X60 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X61 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X62 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X63 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X64 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X65 | Plate, retaining forward clutch | 11.62 | 1 | |
| plate, retaining | ||||
| 31567-31X79 | Plate, retaining | 8.99 | 1 | |
| 31567-31X80 | Plate, retaining | 8.99 | 1 | |
| 31567-31X81 | Plate, retaining | 8.99 | 1 | |
| 31567-31X82 | Plate, retaining | 8.99 | 1 | |
| 31567-31X83 | Plate, retaining | 8.99 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
F
S
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CGA3DE
Volume
1.30
Frame
GH-AZ10
Produсtion years
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31410-32X79 | High clutch & input shaft assembly | 179.03 | 1 | |
| 31412-31X10 | High clutch drum & input shaft | 62.33 | 1 | |
| 31505-31X03 | Spring, piston return | 3.14 | 16 | |
| 31506-31X03 | Ring, snap overrun clutch | 1.24 | 1 | |
| 31506-31X04 | Ring, snap forward clutch | 1.00 | 1 | |
| 31506-31X05 | Ring, snap forward clutch | 2.70 | 1 | |
| 31506-31X06 | Ring, snap | 3.15 | 1 | |
| 31506-31X07 | Ring, snap | 1.00 | 1 | |
| 31506-31X08 | Ring, snap clutch drum | 3.15 | 1 | |
| 31506-31X09 | Ring, snap | 2.12 | 1 | |
| 31510-31X67 | Clutch assembly, reverse | 154.19 | 1 | |
| 31511-31X05 | Drum, reverse clutch | 80.38 | 1 | |
| 31514-31X02 | Piston assembly, clutch | 42.38 | 1 | |
| 31521-31X00 | Retainer, spring | 2.12 | 1 | |
| 31521-31X01 | Retainer, spring | 4.09 | 1 | |
| 31525-31X02 | Seal,o ring | 5.48 | 3 | |
| 31526-31X01 | Seal,o ring | 2.12 | 1 | |
| 31527-31X01 | Seal,???? cut ring; Seal-lathe cut ring | 3.14 | 1 | |
| 31527-31X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.61 | 1 | |
| 31527-31X03 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31527-31X73 | Seal,???? cut ring; Seal-lathe cut ring | 2.12 | 1 | |
| 31528-21X10 | Seal, lip | 4.46 | 1 | |
| 31528-31X01 | Seal, lip | 5.48 | 1 | |
| 31528-31X02 | Seal, lip | 4.09 | 1 | |
| 31528-31X03 | Seal, lip | 4.09 | 1 | |
| 31532-31X18 | Plate assembly, drive | 8.99 | 2 | |
| 31532-31X19 | Plate assembly, drive | 6.35 | 2 | |
| 31535-31X02 | Plate, dished | 9.86 | 1 | |
| 31535-31X03 | Plate, dished | 2.63 | 1 | |
| 31535-31X13 | Plate, dished | 5.48 | 2 | |
| 31536-31X17 | Plate, driven | 2.63 | 5 | |
| 31536-31X18 | Plate, driven | 2.63 | 4 | |
| 31536-31X19 | Plate, driven | 5.92 | 6 | |
| 31536-31X21 | Plate, driven | 5.48 | 2 | |
| 31544-31X03 | Piston assembly, high clutch | 17.98 | 1 | |
| 31575-31X02 | Piston, forward clutch; Piston-foward clutch | 13.81 | 1 | |
| 31584-31X01 | Piston assembly, overrun clutch | 12.57 | 1 | |
| plate, retaining | ||||
| 31537-31X00 | Plate, retaining | 8.99 | 1 | |
| 31537-31X01 | Plate, retaining | 8.99 | 1 | |
| 31537-31X02 | Plate, retaining | 8.99 | 1 | |
| 31537-31X03 | Plate, retaining | 8.99 | 1 | |
| 31537-31X04 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-32X00 | Plate, retaining | 8.99 | 1 | |
| 31537-32X01 | Plate, retaining | 8.99 | 1 | |
| 31537-32X02 | Plate, retaining | 8.99 | 1 | |
| 31537-32X03 | Plate, retaining | 8.99 | 1 | |
| 31537-32X04 | Plate, retaining | 8.99 | 1 | |
| 31537-32X05 | Plate, retaining | 8.99 | 1 | |
| 31537-32X12 | Plate, retaining | 8.99 | 1 | |
| clutch assembly, forward | ||||
| 31570-31X80 | Clutch | 247.72 | 1 | |
| 31570-32X08 | Clutch | 225.07 | 1 | |
| drum assembly, forward clutch | ||||
| 31571-31X06 | Drum assembly, forward clutch; Drum assembly-foward clutch | 153.45 | 1 | |
| 31571-31X08 | Drum assembly, forward clutch; Drum assembly-foward clutch | 168.80 | 1 | |
| retainer, spring forward clutch | ||||
| 31522-31X02 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 2.12 | 1 | |
| 31522-31X03 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 7.31 | 1 | |
| plate assembly, drive | ||||
| 31532-31X16 | Plate assembly, drive | 14.54 | 3 | |
| 31532-31X24 | Plate assembly, drive | 13.22 | 3 | |
| plate, retaining | ||||
| 31537-31X60 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X61 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X62 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X63 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X64 | Plate, retaining forward clutch | 11.62 | 1 | |
| 31537-31X65 | Plate, retaining forward clutch | 11.62 | 1 | |
| plate, retaining | ||||
| 31567-31X79 | Plate, retaining | 8.99 | 1 | |
| 31567-31X80 | Plate, retaining | 8.99 | 1 | |
| 31567-31X81 | Plate, retaining | 8.99 | 1 | |
| 31567-31X82 | Plate, retaining | 8.99 | 1 | |
| 31567-31X83 | Plate, retaining | 8.99 | 1 | |
| plate assembly, drive | ||||
| 31532-31X02 | Plate | 13.22 | 5 | |
| 31532-31X60 | Plate assembly, drive | 13.22 | 5 | |
| spring, piston return | ||||
| 31505-31X02 | Spring, piston return | 3.14 | 16 | |
| 31505-31X05 | Spring, piston return | 3.14 | 16 | |
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
F
S
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CG13DE
Volume
1.30
Frame
GF-Z10
Produсtion years
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31506-31X16 | Ring, snap | 1.24 | 1 | |
|
31527-31X72
|
Seal,???? cut ring; Seal-lathe cut ring | 4.61 | 1 | |
| 31528-31X04 | Seal,o ring | 4.09 | 1 | |
| 31532-31X10 | Plate assembly, drive | 19.80 | 4 | |
| 31535-31X10 | Plate, dished | 15.12 | 2 | |
| 31645-31X05 | Piston, low & reverse brake | 28.50 | 1 | |
| 31655-31X01 | Retainer assembly, spring low & reverse brake | 15.35 | 1 | |
| 31666-31X03 | Plate, driven | 10.30 | 4 | |
| 31667-31X21 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31667-31X16 | Plate, retaining | 8.99 | 1 | |
| 31667-31X17 | Plate, retaining | 8.99 | 1 | |
| 31667-31X18 | Plate, retaining | 8.99 | 1 | |
| 31667-31X19 | Plate, retaining | 8.99 | 1 | |
| 31667-31X20 | Plate, retaining | 8.99 | 1 | |
| 31667-31X21 | Plate, retaining | 8.99 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
F
S
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CGA3DE
Volume
1.30
Frame
GH-AZ10
Produсtion years
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31506-31X16 | Ring, snap | 1.24 | 1 | |
|
31527-31X72
|
Seal,???? cut ring; Seal-lathe cut ring | 4.61 | 1 | |
| 31528-31X04 | Seal,o ring | 4.09 | 1 | |
| 31532-31X15 | Plate assembly, drive | 13.22 | 4 | |
| 31535-31X10 | Plate, dished | 15.12 | 2 | |
| 31645-31X05 | Piston, low & reverse brake | 28.50 | 1 | |
| 31655-31X02 | Retainer assembly, spring low & reverse brake | 15.35 | 1 | |
| 31666-31X04 | Plate, driven | 10.30 | 4 | |
| 31667-31X21 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31667-31X16 | Plate, retaining | 8.99 | 1 | |
| 31667-31X17 | Plate, retaining | 8.99 | 1 | |
| 31667-31X18 | Plate, retaining | 8.99 | 1 | |
| 31667-31X19 | Plate, retaining | 8.99 | 1 | |
| 31667-31X20 | Plate, retaining | 8.99 | 1 | |
| 31667-31X21 | Plate, retaining | 8.99 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
F
S
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
CGA3DE
Volume
1.30
Frame
GH-AZ10
Produсtion years
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31506-31X01 | Ring, snap | 1.24 | 1 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| 31526-31X02 | Seal,o ring band servo; Seal-0 ring | 2.12 | 1 | |
| 31526-31X03 | Seal,o ring band servo; Seal-0 ring | 2.12 | 1 | |
| 31526-31X04 | Seal,o ring band servo; Seal-0 ring | 2.12 | 1 | |
| 31526-31X05 | Seal,o ring band ?-?; Seal-0 ring | 2.12 | 1 | |
| 31526-31X06 | Seal,o ring band ?-?; Seal-0 ring | 2.12 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31527-31X62 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-31X63 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-31X67 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31605-31X20 | Spring, servo | 1.76 | 1 | |
| 31605-31X21 | Spring, servo | 1.76 | 1 | |
| 31605-33X01 | Spring, accumulator | 2.05 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| 31611-31X07 | Retainer, servo piston | 24.19 | 1 | |
| 31615-31X01 | Piston, band servo | 18.71 | 1 | |
| 31618-31X03 | Stem, band servo piston | 4.61 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
|
31625-31X01
|
Pin, anchor end | 2.12 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31691-31X04 | Retainer, servo piston | 25.28 | 1 | |
| 31695-31X08 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| band assembly, brake | ||||
| 31630-31X02 | Band assembly, brake | 24.99 | 1 | |
| 31630-31X03 | Band assembly, brake | 24.99 | 1 | |
| piston, accumulator servo | ||||
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31675-31X06 | Piston, accumulator servo | 5.48 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||