Clutch & band servo (unit) for Nissan R'nessa N30, 1 generation, restyling 01.2000 - 12.2001
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT/T
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
SR20DET
Volume
2.00
Frame
GF-NN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00922-50510 | Pin | 1.00 | - | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31377-80X13 | Bolt | 1.17 | 3 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31526-80X03 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X04 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X05 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X06 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31527-80X07 | Seal, race cut ring; Seal-lathe cut ring | 1.55 | 1 | |
| 31527-80X08 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-80X15 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| 31611-80X04 | Retainer, servo piston | 24.19 | 1 | |
| 31615-80X00 | Piston, band servo | 18.71 | 1 | |
| 31618-80X07 | Stem, band servo piston | 4.60 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
| 31623-80X01 | Gasket, retainer servo | 5.48 | 1 | |
| 31624-41X00 | Strut, band | 2.12 | 1 | |
| 31625-80X01 | Pin, anchor end | 2.12 | 1 | |
| 31630-80X02 | Band assembly, brake | 41.94 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31691-80X14 | Retainer, servo piston | 25.28 | 1 | |
| 31695-80X14 | Piston, over drive servo | 7.31 | 1 |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
KA24DE
Volume
2.40
Frame
GF-PNN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 00922-50510 | Pin | 1.00 | - | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31377-80X13 | Bolt | 1.17 | 3 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31526-80X03 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X04 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X05 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X06 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31527-31X66 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31527-31X67 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31527-80X14 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| 31611-80X05 | Retainer, servo piston | 24.19 | 1 | |
| 31615-80X02 | Piston, band servo | 18.70 | 1 | |
| 31618-80X07 | Stem, band servo piston | 4.60 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
| 31623-80X01 | Gasket, retainer servo | 5.48 | 1 | |
| 31624-41X00 | Strut, band | 2.12 | 1 | |
| 31625-80X01 | Pin, anchor end | 2.12 | 1 | |
| 31630-80X02 | Band assembly, brake | 41.94 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31691-80X12 | Retainer, servo piston | 25.28 | 1 | |
| 31695-80X15 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT/T
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
SR20DET
Volume
2.00
Frame
GF-NN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31407-80X06 | Bearing, needle thrust | 8.99 | 1 | |
| 31412-80X07 | High clutch drum & input shaft | 72.12 | 1 | |
| 31505-80X05 | Spring, return piston | 1.75 | 12 | |
| 31505-80X06 | Spring, piston return | 4.09 | 1 | |
| 31506-80X01 | Ring, snap | 1.24 | 1 | |
| 31506-80X02 | Ring, snap | 1.00 | 1 | |
| 31506-80X03 | Ring, snap | 2.70 | 1 | |
| 31506-80X05 | Ring, snap | 1.00 | 1 | |
| 31506-80X06 | Ring, snap | 2.12 | 1 | |
| 31506-80X07 | Ring, snap | 3.14 | 1 | |
| 31506-80X13 | Ring, snap | 3.15 | 1 | |
| 31510-80X22 | Clutch assembly, reverse | 154.19 | 1 | |
| 31511-80X07 | Drum, reverse clutch | 80.38 | 1 | |
| 31514-80X01 | Piston assembly, clutch | 42.38 | 1 | |
| 31521-80X00 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 7.31 | 1 | |
| 31522-80X04 | Retainer, spring | 4.09 | 1 | |
| 31522-80X06 | Retainer, spring | 2.12 | 1 | |
| 31525-80X02 | Seal,o ring | 5.48 | 3 | |
| 31526-80X01 | Seal,o ring | 2.12 | 1 | |
| 31527-80X00 | Seal,???? cut ring; Seal-lathe cut ring | 2.12 | 1 | |
| 31527-80X01 | Seal,???? cut ring; Seal-lathe cut ring | 5.48 | 1 | |
| 31527-80X02 | Seal,???? cut ring; Seal-lathe cut ring | 3.14 | 1 | |
| 31527-80X03 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31527-80X04 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31528-80X00 | Seal, lip | 3.51 | 1 | |
| 31528-80X01 | Seal, lip | 4.09 | 1 | |
| 31532-80X11 | Plate assembly, drive | 8.99 | 2 | |
| 31532-80X12 | Plate assembly, drive | 13.23 | 3 | |
| 31535-80X02 | Plate, dished | 9.86 | 1 | |
| 31535-80X07 | Plate, dished | 5.48 | 2 | |
| 31535-80X08 | Plate, dished | 15.13 | 2 | |
| 31536-80X11 | Plate, driven | 5.92 | 5 | |
| 31536-80X12 | Plate, driven | 5.92 | 5 | |
| 31536-80X13 | Plate, driven | 5.92 | 1 | |
| 31536-80X14 | Plate, driven | 5.92 | 6 | |
| 31536-80X15 | Plate, driven | 5.48 | 2 | |
| 31537-80X75 | Plate, retaining | 11.62 | 1 | |
| 31544-80X02 | Piston assembly, high clutch | 46.77 | 1 | |
| 31571-80X04 | Drum assembly, forward clutch; Drum assembly-foward clutch | 153.45 | 1 | |
| 31575-80X00 | Piston, forward clutch; Piston-foward clutch | 12.57 | 1 | |
| 31584-80X01 | Piston assembly, overrun clutch | 17.98 | 1 | |
| plate, retaining | ||||
| 31537-80X05 | Plate, retaining | 8.99 | 1 | |
| 31537-80X06 | Plate, retaining | 8.99 | 1 | |
| 31537-80X07 | Plate, retaining | 8.99 | 1 | |
| 31537-80X08 | Plate, retaining | 8.99 | 1 | |
| 31537-80X09 | Plate, retaining | 8.99 | 1 | |
| 31537-80X20 | Plate, retaining | 8.99 | 1 | |
| 31537-80X21 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-81X10 | Plate, retaining | 8.99 | 1 | |
| 31537-81X11 | Plate, retaining | 8.99 | 1 | |
| 31537-81X12 | Plate, retaining | 8.99 | 1 | |
| 31537-81X13 | Plate, retaining | 8.99 | 1 | |
| 31537-81X14 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-80X70 | Plate, retaining | 11.62 | 1 | |
| 31537-80X71 | Plate, retaining | 11.62 | 1 | |
| 31537-80X72 | Plate, retaining | 11.62 | 1 | |
| 31537-80X73 | Plate, retaining | 11.62 | 1 | |
| 31537-80X74 | Plate, retaining | 11.62 | 1 | |
| 31537-80X75 | Plate, retaining | 11.62 | 1 | |
| 31537-80X76 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-80X65 | Plate, retaining | 10.74 | 1 | |
| 31537-80X66 | Plate, retaining | 10.74 | 1 | |
| 31537-80X67 | Plate, retaining | 10.74 | 1 | |
| 31537-80X68 | Plate, retaining | 10.74 | 1 | |
| 31537-80X69 | Plate, retaining | 10.74 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
KA24DE
Volume
2.40
Frame
GF-PNN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31407-80X06 | Bearing, needle thrust | 8.99 | 1 | |
| 31412-80X07 | High clutch drum & input shaft | 72.12 | 1 | |
| 31505-80X05 | Spring, return piston | 1.75 | 12 | |
| 31505-80X06 | Spring, piston return | 4.09 | 1 | |
| 31506-80X01 | Ring, snap | 1.24 | 1 | |
| 31506-80X02 | Ring, snap | 1.00 | 1 | |
| 31506-80X03 | Ring, snap | 2.70 | 1 | |
| 31506-80X05 | Ring, snap | 1.00 | 1 | |
| 31506-80X06 | Ring, snap | 2.12 | 1 | |
| 31506-80X07 | Ring, snap | 3.14 | 1 | |
| 31506-80X13 | Ring, snap | 3.15 | 1 | |
| 31510-80X22 | Clutch assembly, reverse | 154.19 | 1 | |
| 31511-80X07 | Drum, reverse clutch | 80.38 | 1 | |
| 31514-80X01 | Piston assembly, clutch | 42.38 | 1 | |
| 31521-80X00 | Retainer, spring forward clutch; Retainer-spring,foward clutch | 7.31 | 1 | |
| 31522-80X04 | Retainer, spring | 4.09 | 1 | |
| 31522-80X06 | Retainer, spring | 2.12 | 1 | |
| 31525-80X02 | Seal,o ring | 5.48 | 3 | |
| 31526-80X01 | Seal,o ring | 2.12 | 1 | |
| 31527-80X00 | Seal,???? cut ring; Seal-lathe cut ring | 2.12 | 1 | |
| 31527-80X01 | Seal,???? cut ring; Seal-lathe cut ring | 5.48 | 1 | |
| 31527-80X02 | Seal,???? cut ring; Seal-lathe cut ring | 3.14 | 1 | |
| 31527-80X03 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31527-80X04 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31528-80X00 | Seal, lip | 3.51 | 1 | |
| 31528-80X01 | Seal, lip | 4.09 | 1 | |
| 31532-80X11 | Plate assembly, drive | 8.99 | 2 | |
| 31532-80X12 | Plate assembly, drive | 13.23 | 3 | |
| 31535-80X02 | Plate, dished | 9.86 | 1 | |
| 31535-80X07 | Plate, dished | 5.48 | 2 | |
| 31535-80X08 | Plate, dished | 15.13 | 2 | |
| 31536-80X11 | Plate, driven | 5.92 | 5 | |
| 31536-80X12 | Plate, driven | 5.92 | 5 | |
| 31536-80X13 | Plate, driven | 5.92 | 1 | |
| 31536-80X14 | Plate, driven | 5.92 | 7 | |
| 31536-80X15 | Plate, driven | 5.48 | 2 | |
| 31537-80X75 | Plate, retaining | 11.62 | 1 | |
| 31544-80X02 | Piston assembly, high clutch | 46.77 | 1 | |
| 31571-80X04 | Drum assembly, forward clutch; Drum assembly-foward clutch | 153.45 | 1 | |
| 31575-80X00 | Piston, forward clutch; Piston-foward clutch | 12.57 | 1 | |
| 31584-80X01 | Piston assembly, overrun clutch | 17.98 | 1 | |
| plate, retaining | ||||
| 31537-80X05 | Plate, retaining | 8.99 | 1 | |
| 31537-80X06 | Plate, retaining | 8.99 | 1 | |
| 31537-80X07 | Plate, retaining | 8.99 | 1 | |
| 31537-80X08 | Plate, retaining | 8.99 | 1 | |
| 31537-80X09 | Plate, retaining | 8.99 | 1 | |
| 31537-80X20 | Plate, retaining | 8.99 | 1 | |
| 31537-80X21 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-81X11 | Plate, retaining | 8.99 | 1 | |
| 31537-81X12 | Plate, retaining | 8.99 | 1 | |
| 31537-81X13 | Plate, retaining | 8.99 | 1 | |
| 31537-81X14 | Plate, retaining | 8.99 | 1 | |
| 31537-81X15 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-80X70 | Plate, retaining | 11.62 | 1 | |
| 31537-80X71 | Plate, retaining | 11.62 | 1 | |
| 31537-80X72 | Plate, retaining | 11.62 | 1 | |
| 31537-80X73 | Plate, retaining | 11.62 | 1 | |
| 31537-80X74 | Plate, retaining | 11.62 | 1 | |
| 31537-80X75 | Plate, retaining | 11.62 | 1 | |
| 31537-80X76 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31537-80X65 | Plate, retaining | 10.74 | 1 | |
| 31537-80X66 | Plate, retaining | 10.74 | 1 | |
| 31537-80X67 | Plate, retaining | 10.74 | 1 | |
| 31537-80X68 | Plate, retaining | 10.74 | 1 | |
| 31537-80X69 | Plate, retaining | 10.74 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT/T
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
SR20DET
Volume
2.00
Frame
GF-NN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31506-80X09 | Ring, snap | 2.12 | 1 | |
| 31527-80X05 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31527-80X06 | Seal,???? cut ring; Seal-lathe cut ring | 4.61 | 1 | |
| 31642-80X03 | Retainer assembly, spring low & reverse brake | 17.98 | 1 | |
| 31645-80X04 | Piston, low & reverse brake | 28.50 | 1 | |
| 31655-80X01 | Retainer assembly, spring low & reverse brake | 11.76 | 1 | |
| 31662-80X03 | Plate assembly, drive | 13.23 | 7 | |
| 31665-80X04 | Plate, dished | 15.13 | 2 | |
| 31666-80X03 | Plate, driven | 9.37 | 7 | |
| plate, retaining | ||||
| 31667-80X00 | Plate, retaining | 8.99 | 1 | |
| 31667-80X01 | Plate, retaining | 8.99 | 1 | |
| 31667-80X02 | Plate, retaining | 8.99 | 1 | |
| 31667-80X03 | Plate, retaining | 8.99 | 1 | |
| 31667-80X04 | Plate, retaining | 8.99 | 1 | |
| 31667-80X05 | Plate, retaining | 8.99 | 1 | |
| 31667-80X06 | Plate, retaining | 8.99 | 1 | |
| 31667-80X07 | Plate, retaining | 8.99 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
KA24DE
Volume
2.40
Frame
GF-PNN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31506-80X09 | Ring, snap | 2.12 | 1 | |
| 31527-80X05 | Seal,???? cut ring; Seal-lathe cut ring | 4.60 | 1 | |
| 31527-80X06 | Seal,???? cut ring; Seal-lathe cut ring | 4.61 | 1 | |
| 31642-80X03 | Retainer assembly, spring low & reverse brake | 17.98 | 1 | |
| 31645-80X04 | Piston, low & reverse brake | 28.50 | 1 | |
| 31655-80X01 | Retainer assembly, spring low & reverse brake | 11.76 | 1 | |
| 31662-80X03 | Plate assembly, drive | 13.23 | 6 | |
| 31665-80X04 | Plate, dished | 15.13 | 2 | |
| 31666-80X03 | Plate, driven | 9.37 | 6 | |
| 31667-80X08 | Plate, retaining | 8.99 | 1 | |
| plate, retaining | ||||
| 31667-80X00 | Plate, retaining | 8.99 | 1 | |
| 31667-80X01 | Plate, retaining | 8.99 | 1 | |
| 31667-80X02 | Plate, retaining | 8.99 | 1 | |
| 31667-80X03 | Plate, retaining | 8.99 | 1 | |
| 31667-80X04 | Plate, retaining | 8.99 | 1 | |
| 31667-80X05 | Plate, retaining | 8.99 | 1 | |
| 31667-80X06 | Plate, retaining | 8.99 | 1 | |
| 31667-80X07 | Plate, retaining | 8.99 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT/T
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
SR20DET
Volume
2.00
Frame
GF-NN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31527-80X07 | Seal, race cut ring; Seal-lathe cut ring | 1.55 | 1 | |
| 31527-80X08 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-80X15 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31611-80X04 | Retainer, servo piston | 24.19 | 1 | |
| 31615-80X00 | Piston, band servo | 18.71 | 1 | |
| 31623-80X01 | Gasket, retainer servo | 5.48 | 1 | |
| 31695-80X14 | Piston, over drive servo | 7.31 | 1 | |
| 31630-80X02 | Band assembly, brake | 41.94 | 1 | |
| 31625-80X01 | Pin, anchor end | 2.12 | 1 | |
| 31624-41X00 | Strut, band | 2.12 | 1 | |
| 31618-80X07 | Stem, band servo piston | 4.60 | 1 | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
| 31526-80X06 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31526-80X03 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31526-80X05 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31377-80X13 | Bolt | 1.17 | 3 | |
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X04 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| retainer, servo piston | ||||
| 31691-80X14 | Retainer, servo piston | 25.28 | 1 | |
| 31691-80X23 | Retainer, servo piston | 25.28 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
KA24DE
Volume
2.40
Frame
GF-PNN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31623-80X01 | Gasket, retainer servo | 5.48 | 1 | |
| 31625-80X01 | Pin, anchor end | 2.12 | 1 | |
| 31611-80X05 | Retainer, servo piston | 24.19 | 1 | |
| 31624-41X00 | Strut, band | 2.12 | 1 | |
| 31615-80X02 | Piston, band servo | 18.70 | 1 | |
| 31527-31X66 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31527-31X67 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
| 31526-80X06 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31526-80X03 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31526-80X05 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31377-80X13 | Bolt | 1.17 | 3 | |
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X04 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| band assembly, brake | ||||
| 31630-80X02 | Band assembly, brake | 41.94 | 1 | |
| 31630-80X05 | Band assembly, brake | 24.99 | 1 | |
| stem, band servo piston | ||||
|
31618-80X05
|
Stem, band servo piston | 4.20 | 1 | |
| 31618-80X07 | Stem, band servo piston | 4.60 | 1 | |
| seal, race cut ring | ||||
| 31527-80X14 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31527-80X17 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| piston, over drive servo | ||||
| 31695-80X08 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| 31695-80X15 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| spring, servo | ||||
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31605-31X20 | Spring, servo | 1.76 | 1 | |
| spring, servo | ||||
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
|
31605-80X07
|
Spring, servo | 1.76 | 1 | |
| retainer, servo piston | ||||
| 31691-80X12 | Retainer, servo piston | 25.28 | 1 | |
| 31691-80X62 | Retainer, servo piston | 25.28 | 1 | |
| spring, servo | ||||
| 31605-80X00 | Spring, servo | 1.52 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
GT/T
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
SR20DET
Volume
2.00
Frame
GF-NN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31526-80X07 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31527-80X07 | Seal, race cut ring; Seal-lathe cut ring | 1.55 | 1 | |
| 31527-80X08 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| 31527-80X15 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31611-80X04 | Retainer, servo piston | 24.19 | 1 | |
| 31615-80X00 | Piston, band servo | 18.71 | 1 | |
| 31695-80X14 | Piston, over drive servo | 7.31 | 1 | |
| 31630-80X02 | Band assembly, brake | 41.94 | 1 | |
| 31625-80X01 | Pin, anchor end | 2.12 | 1 | |
| 31624-41X00 | Strut, band | 2.12 | 1 | |
| 31618-80X07 | Stem, band servo piston | 4.60 | 1 | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
| 31526-80X06 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31526-80X03 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31526-80X05 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31377-80X13 | Bolt | 1.17 | 3 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X04 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| piston, accumulator servo | ||||
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31675-80X07 | Piston, accumulator servo | 5.48 | 1 | |
| retainer, servo piston | ||||
| 31691-80X14 | Retainer, servo piston | 25.28 | 1 | |
| 31691-80X23 | Retainer, servo piston | 25.28 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
KA24DE
Volume
2.40
Frame
GF-PNN30
Produсtion years
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 31526-80X07 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31625-80X01 | Pin, anchor end | 2.12 | 1 | |
| 31611-80X05 | Retainer, servo piston | 24.19 | 1 | |
| 31624-41X00 | Strut, band | 2.12 | 1 | |
| 31615-80X02 | Piston, band servo | 18.70 | 1 | |
| 31527-31X66 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31527-31X67 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31365-31X04 | Nut | 1.17 | 1 | |
| 31622-31X01 | Retainer, snap stem band | 3.14 | 1 | |
| 31526-80X06 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31619-01X00 | Retainer, return spring servo | 1.00 | 1 | |
| 31526-41X03 | Seal,o ring; Seal-0 ring | 1.15 | 1 | |
| 31526-80X03 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31605-31X15 | Spring, accumulator | 2.12 | 1 | |
| 31526-80X05 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31377-80X13 | Bolt | 1.17 | 3 | |
| 31526-31X08 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
| 31526-80X04 | Seal,o ring; Seal-0 ring | 2.12 | 1 | |
|
31672-21X00
|
Seal,o ring accumulator; Seal-0 ring | 2.47 | 1 | |
|
31526-41X02
|
Seal,o ring; Seal-0 ring | 1.16 | 1 | |
| 31506-31X17 | Ring, snap | 2.70 | 1 | |
| band assembly, brake | ||||
| 31630-80X02 | Band assembly, brake | 41.94 | 1 | |
| 31630-80X05 | Band assembly, brake | 24.99 | 1 | |
| stem, band servo piston | ||||
|
31618-80X05
|
Stem, band servo piston | 4.20 | 1 | |
| 31618-80X07 | Stem, band servo piston | 4.60 | 1 | |
| seal, race cut ring | ||||
| 31527-80X14 | Seal, race cut ring; Seal-lathe cut ring | 2.42 | 1 | |
| 31527-80X17 | Seal, race cut ring; Seal-lathe cut ring | 2.41 | 1 | |
| piston, over drive servo | ||||
| 31695-80X08 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| 31695-80X15 | Piston, over drive servo; Piston-overdrive servo | 7.31 | 1 | |
| spring, servo | ||||
| 31605-31X00 | Spring, piston return | 2.12 | 1 | |
| 31605-31X20 | Spring, servo | 1.76 | 1 | |
| spring, servo | ||||
| 31605-31X01 | Spring, piston return | 1.24 | 1 | |
|
31605-80X07
|
Spring, servo | 1.76 | 1 | |
| piston, accumulator servo | ||||
| 31675-80X02 | Piston, accumulator | 5.48 | 1 | |
| 31675-80X07 | Piston, accumulator servo | 5.48 | 1 | |
| retainer, servo piston | ||||
| 31691-80X12 | Retainer, servo piston | 25.28 | 1 | |
| 31691-80X62 | Retainer, servo piston | 25.28 | 1 | |
| piston, accumulator servo | ||||
| 31675-31X02 | Piston, accumulator | 5.48 | 1 | |
| 31675-31X06 | Piston, accumulator servo | 5.48 | 1 | |
| spring, servo | ||||
| 31605-80X00 | Spring, servo | 1.52 | 1 | |
| 31605-80X03 | Spring, accumulator | 2.12 | 1 | |
| Subschemes | ||||
| Torque Converter, Housing & Case (Unit) | ||||