Torque converter, housing & case (unit) for Nissan Skyline V36, 12 generation 10.2007 - 12.2015
-
Body styleSedan
-
Grade250GT/F, 250GTP, 250GTV
-
Drive4WD
-
EngineVQ25HR
-
Volume2.50
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
250GT/F
250GTP
250GTV
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
VQ25HR
Volume
2.50
Frame
DBA-NV36
Produсtion years
2006
2007
2008
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 08120-61228 | Bolt | 1.00 | - | |
| 081B1-0351A | Bolt | 1.60 | - | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 24136-CG101 | Bracket | 4.90 | 1 | |
| 24210-AM61A | Clip | 5.12 | 2 | |
| 24210-S090A | Clip | 1.00 | 1 | |
| 31100-90X61 | Converter assembly, torque | 621.13 | 1 | |
| 31301-97X0B | Housing, converter | 296.68 | 1 | |
| 31305-90X01 | Plug, thread | 1.24 | 3 | |
| 31308-41X00 | Pin, dowel | 1.24 | 1 | |
| 31330-97X02 | Case assembly, adapter | 309.83 | 1 | |
| 31338-95X0A | Gasket, extension | 4.17 | 1 | |
| 31375-90X0A | Seal, oil adapter case | 3.22 | 1 | |
|
31377-31X06
|
Bolt | 2.97 | 1 | |
| 31377-90X02 | Bolt | 1.61 | 3 | |
|
31377-JL01A
|
Bolt | 1.00 | 1 | |
| 31381-41X01 | Breather, air | 4.60 | 1 | |
| 31397-90X01 | Gasket, spacer oil charging pipe | 1.97 | 1 | |
| 31437-90X02 | Spacer, oil charging pipe | 4.17 | 1 | |
| 31505-90X00 | Spring, piston return | 5.19 | 1 | |
| 31506-90X03 | Ring, snap | 2.70 | 1 | |
| 31526-90X05 | Seal,o ring | 2.12 | 1 | |
| 31526-90X08 | Seal,o ring | 1.24 | 3 | |
| 31527-90X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 31527-95X00 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 31605-90X02 | Spring | 2.12 | 1 | |
| 31656-90X00 | Retainer, spring reverse | 6.87 | 1 | |
| 31662-90X00 | Plate assembly, drive | 15.12 | 5 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |
| 31981-95X00 | Support, parking actuator | 4.17 | 1 | |
| 31986-90X00 | Shaft, parking pole | 2.12 | 1 | |
| 31988-95X00 | Spring, return pole | 4.09 | 1 | |
| 31991-95X01 | Pawl-parking | 17.17 | 1 | |
| 31666-90X00 | Plate, driven | 15.13 | 5 | |
| seal, oil | ||||
| 31375-31X01 | Oil, oil | 1.24 | 2 | |
| 31375-90X0B | Seal, oil | 2.12 | 2 | |
| magnet | ||||
| 31379-3AX0A | Magnet | 2.21 | 2 | |
| 31379-41X00 | Magnet | 2.21 | 2 | |
| gasket, oil pan | ||||
| 31397-90X00 | Gasket, oil pan | 12.20 | 1 | |
| 31397-90X0A | Gasket, oil pan | 12.20 | 1 | |
| pan assembly, oil | ||||
| 31390-90X00 | Pan assembly, oil | 31.06 | 1 | |
| 31390-90X0B | Pan assembly, oil | 31.06 | 1 | |
| plate, retaining | ||||
| 31667-90X0A | Plate, retaining | 8.55 | 1 | |
| 31667-90X14 | Plate, retaining | 8.99 | 1 | |
| 31667-90X15 | Plate, retaining | 8.99 | 1 | |
| 31667-90X16 | Plate, retaining | 8.99 | 1 | |
| 31667-90X17 | Plate, retaining | 8.99 | 1 | |
| 31667-90X18 | Plate, retaining | 8.99 | 1 | |
| 31667-90X19 | Plate, retaining | 8.99 | 1 | |
| bolt | ||||
|
31377-41X06
|
Bolt | 1.00 | 22 | |
| 31377-41X60 | Bolt | 1.17 | 22 | |
| ring, snap | ||||
| 31506-1XJ0A | Ring, snap | 2.70 | 1 | |
| 31506-90X04 | Ring, snap | 2.70 | 1 | |
| piston, reverse brake | ||||
| 31645-97X00 | Piston, reverse brake | 11.40 | 1 | |
| 31645-97X0A | Piston, reverse brake | 11.40 | 1 | |
| plate, dished | ||||
| 31665-90X01 | Plate, dished | 3.51 | 1 | |
| 31665-90X02 | Plate, dished | 10.38 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
250GT/F
250GTP
250GTV
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
VQ25HR
Volume
2.50
Frame
DBA-NV36
Produсtion years
2006
2007
2008
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 08120-61228 | Bolt | 1.00 | - | |
| 081B1-0351A | Bolt | 1.60 | - | |
| 31986-90X00 | Shaft, parking pole | 2.12 | 1 | |
| 31988-95X00 | Spring, return pole | 4.09 | 1 | |
| 31991-95X01 | Pawl-parking | 17.17 | 1 | |
| 31301-97X0B | Housing, converter | 296.68 | 1 | |
| 31381-41X01 | Breather, air | 4.60 | 1 | |
| 31526-90X05 | Seal,o ring | 2.12 | 1 | |
| 31375-90X0B | Seal, oil | 2.12 | 2 | |
| 31338-95X0A | Gasket, extension | 4.17 | 1 | |
| 31305-90X01 | Plug, thread | 1.24 | 3 | |
| 31527-95X00 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 31377-90X02 | Bolt | 1.61 | 2 | |
| 31100-90X61 | Converter assembly, torque | 621.13 | 1 | |
| 31662-90X00 | Plate assembly, drive | 15.12 | 5 | |
| 31379-3AX0A | Magnet | 2.21 | 2 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 31666-95X03 | Plate, driven | 15.13 | 1 | |
|
31377-31X06
|
Bolt | 2.97 | 1 | |
| 31981-95X00 | Support, parking actuator | 4.17 | 1 | |
| 31506-90X03 | Ring, snap | 2.70 | 1 | |
| 31308-41X00 | Pin, dowel | 1.24 | 1 | |
| 31526-90X08 | Seal,o ring | 1.24 | 3 | |
| 31377-41X60 | Bolt | 1.17 | 22 | |
| 31330-97X02 | Case assembly, adapter | 309.83 | 1 | |
| 31505-90X00 | Spring, piston return | 5.19 | 1 | |
| 31605-90X02 | Spring | 2.12 | 1 | |
| 31375-90X0A | Seal, oil adapter case | 3.22 | 1 | |
| 31645-97X0A | Piston, reverse brake | 11.40 | 1 | |
| 31437-90X02 | Spacer, oil charging pipe | 4.17 | 1 | |
| 31397-90X01 | Gasket, spacer oil charging pipe | 1.97 | 1 | |
| 31656-90X00 | Retainer, spring reverse | 6.87 | 1 | |
| 24210-S090A | Clip | 1.00 | 1 | |
| 24210-AM61A | Clip | 5.12 | 2 | |
| 31527-90X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 24136-CG101 | Bracket | 4.90 | 1 | |
| plate, driven | ||||
| 31666-90X00 | Plate, driven | 15.13 | 5 | |
| 31666-90X0C | Plate, driven | 15.12 | 4 | |
| gasket, oil pan | ||||
| 31397-90X00 | Gasket, oil pan | 12.20 | 1 | |
| 31397-90X0A | Gasket, oil pan | 12.20 | 1 | |
| pan assembly, oil | ||||
| 31390-90X00 | Pan assembly, oil | 31.06 | 1 | |
| 31390-90X0A | Pan assembly, oil | 31.06 | 1 | |
| 31390-90X0B | Pan assembly, oil | 31.06 | 1 | |
| plate, retaining | ||||
| 31667-90X0A | Plate, retaining | 8.55 | 1 | |
| 31667-90X14 | Plate, retaining | 8.99 | 1 | |
| 31667-90X15 | Plate, retaining | 8.99 | 1 | |
| 31667-90X16 | Plate, retaining | 8.99 | 1 | |
| 31667-90X17 | Plate, retaining | 8.99 | 1 | |
| 31667-90X18 | Plate, retaining | 8.99 | 1 | |
| 31667-90X19 | Plate, retaining | 8.99 | 1 | |
| ring, snap | ||||
| 31506-1XJ0A | Ring, snap | 2.70 | 1 | |
| 31506-1XJ3A | Ring, snap | 2.70 | 1 | |
| bolt, spacer oil charging pipe | ||||
| 31377-1XJ0B | Bolt, spacer oil charging pipe | 1.17 | 2 | |
|
31377-JL01A
|
Bolt | 1.00 | 1 | |
| plate, dished | ||||
| 31665-90X02 | Plate, dished | 10.38 | 1 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |
| plate, dished | ||||
| 31665-90X01 | Plate, dished | 3.51 | 1 | |
| 31665-90X02 | Plate, dished | 10.38 | 1 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
250GT/F
250GTP
250GTV
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
VQ25HR
Volume
2.50
Frame
DBA-NV36
Produсtion years
2008
2009
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 08120-61228 | Bolt | 1.00 | - | |
| 081B1-0351A | Bolt | 1.60 | - | |
| 31986-90X00 | Shaft, parking pole | 2.12 | 1 | |
| 31988-95X00 | Spring, return pole | 4.09 | 1 | |
| 31991-95X01 | Pawl-parking | 17.17 | 1 | |
| 31301-97X0B | Housing, converter | 296.68 | 1 | |
| 31381-41X01 | Breather, air | 4.60 | 1 | |
| 31526-90X05 | Seal,o ring | 2.12 | 1 | |
| 31375-90X0B | Seal, oil | 2.12 | 2 | |
| 31338-95X0A | Gasket, extension | 4.17 | 1 | |
| 31305-90X01 | Plug, thread | 1.24 | 3 | |
| 31527-95X00 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 31377-90X02 | Bolt | 1.61 | 2 | |
| 31100-90X61 | Converter assembly, torque | 621.13 | 1 | |
| 31662-90X00 | Plate assembly, drive | 15.12 | 5 | |
| 31379-3AX0A | Magnet | 2.21 | 2 | |
| 31397-90X0A | Gasket, oil pan | 12.20 | 1 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 31666-95X03 | Plate, driven | 15.13 | 1 | |
|
31377-31X06
|
Bolt | 2.97 | 1 | |
| 31981-95X00 | Support, parking actuator | 4.17 | 1 | |
| 31506-90X03 | Ring, snap | 2.70 | 1 | |
| 31308-41X00 | Pin, dowel | 1.24 | 1 | |
| 31526-90X08 | Seal,o ring | 1.24 | 3 | |
| 31377-41X60 | Bolt | 1.17 | 22 | |
| 31330-97X02 | Case assembly, adapter | 309.83 | 1 | |
| 31505-90X00 | Spring, piston return | 5.19 | 1 | |
| 31605-90X02 | Spring | 2.12 | 1 | |
| 31375-90X0A | Seal, oil adapter case | 3.22 | 1 | |
| 31645-97X0A | Piston, reverse brake | 11.40 | 1 | |
| 31437-90X02 | Spacer, oil charging pipe | 4.17 | 1 | |
| 31397-90X01 | Gasket, spacer oil charging pipe | 1.97 | 1 | |
| 31656-90X00 | Retainer, spring reverse | 6.87 | 1 | |
| 24210-S090A | Clip | 1.00 | 1 | |
| 24210-AM61A | Clip | 5.12 | 2 | |
| 31527-90X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 24136-CG101 | Bracket | 4.90 | 1 | |
| plate, driven | ||||
| 31666-90X00 | Plate, driven | 15.13 | 4 | |
| 31666-90X0C | Plate, driven | 15.12 | 4 | |
| pan assembly, oil | ||||
| 31390-90X0A | Pan assembly, oil | 31.06 | 1 | |
| 31390-90X0B | Pan assembly, oil | 31.06 | 1 | |
| plate, retaining | ||||
| 31667-90X0A | Plate, retaining | 8.55 | 1 | |
| 31667-90X14 | Plate, retaining | 8.99 | 1 | |
| 31667-90X15 | Plate, retaining | 8.99 | 1 | |
| 31667-90X16 | Plate, retaining | 8.99 | 1 | |
| 31667-90X17 | Plate, retaining | 8.99 | 1 | |
| 31667-90X18 | Plate, retaining | 8.99 | 1 | |
| 31667-90X19 | Plate, retaining | 8.99 | 1 | |
| ring, snap | ||||
| 31506-1XJ0A | Ring, snap | 2.70 | 1 | |
| 31506-1XJ3A | Ring, snap | 2.70 | 1 | |
| bolt, spacer oil charging pipe | ||||
| 31377-1XJ0B | Bolt, spacer oil charging pipe | 1.17 | 2 | |
|
31377-JL01A
|
Bolt | 1.00 | 1 | |
| plate, dished | ||||
| 31665-90X02 | Plate, dished | 10.38 | 1 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |
| plate, dished | ||||
| 31665-90X01 | Plate, dished | 3.51 | 1 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
250GT/F
250GTP
250GTV
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
VQ25HR
Volume
2.50
Frame
DBA-NV36
Produсtion years
2006
2007
2008
2009
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 08120-61228 | Bolt | 1.00 | - | |
| 081B1-0351A | Bolt | 1.60 | - | |
| 31327-UK00A | Baffle plate | 2.42 | 1 | |
| 31361-1XJ0A | Bolt | 1.00 | 1 | |
| 31526-EH106 | Seal,o ring | 1.24 | 1 | |
| 31986-90X00 | Shaft, parking pole | 2.12 | 1 | |
| 31988-95X00 | Spring, return pole | 4.09 | 1 | |
| 31991-95X01 | Pawl-parking | 17.17 | 1 | |
| 31301-97X0B | Housing, converter | 296.68 | 1 | |
| 31381-41X01 | Breather, air | 4.60 | 1 | |
| 31526-90X05 | Seal,o ring | 2.12 | 1 | |
| 31375-90X0B | Seal, oil | 2.12 | 2 | |
| 31338-95X0A | Gasket, extension | 4.17 | 1 | |
| 31305-90X01 | Plug, thread | 1.24 | 3 | |
| 31527-95X00 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 31377-90X02 | Bolt | 1.61 | 2 | |
| 31100-90X61 | Converter assembly, torque | 621.13 | 1 | |
| 31662-90X00 | Plate assembly, drive | 15.12 | 5 | |
| 31379-3AX0A | Magnet | 2.21 | 2 | |
| 31397-90X0A | Gasket, oil pan | 12.20 | 1 | |
|
11026-01M02
|
Gasket | 1.00 | 1 | |
| 31666-95X03 | Plate, driven | 15.13 | 1 | |
|
31377-31X06
|
Bolt | 2.97 | 1 | |
| 31981-95X00 | Support, parking actuator | 4.17 | 1 | |
| 31506-90X03 | Ring, snap | 2.70 | 1 | |
| 31308-41X00 | Pin, dowel | 1.24 | 1 | |
| 31526-90X08 | Seal,o ring | 1.24 | 3 | |
| 31377-41X60 | Bolt | 1.17 | 22 | |
| 31330-97X02 | Case assembly, adapter | 309.83 | 1 | |
| 31505-90X00 | Spring, piston return | 5.19 | 1 | |
| 31605-90X02 | Spring | 2.12 | 1 | |
| 31375-90X0A | Seal, oil adapter case | 3.22 | 1 | |
| 31645-97X0A | Piston, reverse brake | 11.40 | 1 | |
| 31437-90X02 | Spacer, oil charging pipe | 4.17 | 1 | |
| 31397-90X01 | Gasket, spacer oil charging pipe | 1.97 | 1 | |
| 31656-90X00 | Retainer, spring reverse | 6.87 | 1 | |
| 24210-S090A | Clip | 1.00 | 1 | |
| 24210-AM61A | Clip | 5.12 | 2 | |
| 31527-90X02 | Seal,???? cut ring; Seal-lathe cut ring | 4.09 | 1 | |
| 24136-CG101 | Bracket | 4.90 | 1 | |
| plate, driven | ||||
| 31666-90X00 | Plate, driven | 15.13 | 4 | |
| 31666-90X0C | Plate, driven | 15.12 | 4 | |
| pan assembly, oil | ||||
| 31390-90X0A | Pan assembly, oil | 31.06 | 1 | |
| 31390-90X0B | Pan assembly, oil | 31.06 | 1 | |
| plate, retaining | ||||
| 31667-90X0A | Plate, retaining | 8.55 | 1 | |
| 31667-90X14 | Plate, retaining | 8.99 | 1 | |
| 31667-90X15 | Plate, retaining | 8.99 | 1 | |
| 31667-90X16 | Plate, retaining | 8.99 | 1 | |
| 31667-90X17 | Plate, retaining | 8.99 | 1 | |
| 31667-90X18 | Plate, retaining | 8.99 | 1 | |
| 31667-90X19 | Plate, retaining | 8.99 | 1 | |
| ring, snap | ||||
| 31506-1XJ0A | Ring, snap | 2.70 | 1 | |
| 31506-1XJ3A | Ring, snap | 2.70 | 1 | |
| bolt, spacer oil charging pipe | ||||
| 31377-1XJ0B | Bolt, spacer oil charging pipe | 1.17 | 2 | |
|
31377-JL01A
|
Bolt | 1.00 | 1 | |
| plate, dished | ||||
| 31665-90X02 | Plate, dished | 10.38 | 1 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |
| plate, dished | ||||
| 31665-90X01 | Plate, dished | 3.51 | 1 | |
| 31665-97X00 | Plate, dished | 10.38 | 1 | |