Number | Name | Price from, USD | Required |
---|
90110-06018 | Bolt | 1.00 | - | |
90119C0120 | - | Not available | - | |
90126-06015 | Bolt, stud (for oil pan) | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90253-11005 | Pin, ring | 1.00 | - | |
90910-02142 | Bolt | 1.13 | - | |
91631-G0614 | Bolt, hood hinge | 1.00 | - | |
90250-08120 | Pin, straight | 1.00 | 2 | |
90253-14003 | Pin | 1.15 | 2 | |
15708-28011 | Nozzle sub-assy, oil, no.1 | 7.25 | 4 | |
11361-28010 | Cover, flywheel housing under | 3.67 | 1 | |
96721-19010 | Ring, o | 1.16 | 1 | |
90253-13017 | Pin | 1.00 | 10 | |
90910-02124 | Bolt (for crankshaft bearing cap set) | 1.73 | 10 | |
90341-12012 | Plug | 1.38 | 1 | |
96741-19005 | Ring, o (for oil level gage) | 1.21 | 1 | |
90250-06003 | Pin, straight | 1.00 | 2 | |
BLOCK SUB-ASSY, CYLINDER | ||||
11410-09221 | Block sub-assy, cylinder | 2,182.57 | 1 | |
11410-29345 | Block sub-assy, cylinder | 2,018.66 | 1 | |
CRANKCASE ASSY, STIFFENING | ||||
11420-0H050 | - | Out of stock | 1 | |
11420-0H051 | - | Out of stock | 1 | |
11420-28020 | Crankcase assy, stiffening | 284.83 | 1 | |
11420-28021 | Crankcase assy, stiffening | 284.83 | 1 | |
SEAL, ENGINE REAR OIL | ||||
90311-89003 | Seal, engine rear oil | 3.94 | 1 | |
90311-C0001 | - | Out of stock | 1 | |
PAN SUB-ASSY, OIL | ||||
12101-0H060 | Pan sub-assy, oil | 133.71 | 1 | |
12101-28060 | Pan sub-assy, oil | 62.87 | 1 | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-0H050 | Gage sub-assy, oil level | 9.58 | 1 | |
15301-28030 | Gage sub-assy, oil level | 7.34 | 1 | |
GASKET(FOR OIL PAN DRAIN PLUG) | ||||
90430-12031 | Gasket | 1.00 | 1 | |
90430-C0005 | - | Out of stock | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-28040 | Guide, oil level gage | 14.84 | 1 | |
11452-28060 | Guide, oil level gage | 13.72 | 1 | |
SPACER, CYLINDER BLOCK WATER JACKET | ||||
11445-0H020 | Spacer, cylinder block water jacket | 17.94 | 1 | |
11445-28020 | Spacer, cylinder block water jacket | 11.23 | 1 | |
Subschemes | ||||
OIL COOLER & TUBE(CVT) |
Number | Name | Price from, USD | Required |
---|
90105-08056 | Bolt | 1.12 | - | |
90105-08439 | - | 1.47 | - | |
90105-C0074 | - | Out of stock | - | |
90250-06003 | Pin, straight | 1.00 | - | |
91512-81032 | Bolt | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
15678-28010 | Filter, oil control valve | 3.62 | 1 | |
GASKET, STRAIGHT SCREW PLUG NO.1(FOR CYLINDER BLOCK) | ||||
90430-14011 | Gasket | 1.00 | 1 | |
90430-C0004 | - | Out of stock | 1 | |
Subschemes | ||||
SWITCH & RELAY & COMPUTER |
Number | Name | Price from, USD | Required |
---|
90105-10237 | Bolt | 1.00 | - | |
90110-06018 | Bolt | 1.00 | - | |
90119-06938 | Bolt | 1.00 | - | |
90119-06958 | - | 1.00 | - | |
90126-06028 | Bolt, stud | 1.00 | - | |
90126-08047 | Bolt, stud(for egr valve) | 1.00 | - | |
90126-08052 | Bolt, stud | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90180-10007 | - | 1.00 | - | |
90210-09020 | - | 1.00 | - | |
90910-02153 | Bolt(for crankshaft bearing cap set) | 2.07 | - | |
91551-80616 | Bolt | 1.00 | - | |
91551-80825 | Bolt | 1.00 | - | |
91551-80845 | Bolt (for front differential case) | 1.00 | - | |
91552-K1030 | Bolt | 1.00 | - | |
91552-K1045 | Bolt | 1.00 | - | |
91671-80816 | Bolt (for transmission control cable bracket) | 1.00 | - | |
91671-80818 | Bolt, flange w/washer | 1.00 | - | |
91671-A0612 | Bolt | 1.00 | - | |
94151-80800 | Nut | 1.00 | - | |
90250-04097 | Pin | 1.00 | 2 | |
11401-80774 | Block sub-assy, cylinder | 2,527.64 | 1 | |
90250-08120 | Pin, straight | 1.00 | 4 | |
15708-31030 | Nozzle sub-assy, oil, no.1 | 5.98 | 3 | |
11361-31060 | Cover, flywheel housing under | 11.39 | 1 | |
12101-31121 | Pan sub-assy, oil | 141.81 | 1 | |
15301-31100 | Gage sub-assy, oil level | 6.56 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90301-12018 | Ring, o (for oil level gage guide) | 1.21 | 1 | |
11452-31060 | Guide, oil level gage | 6.39 | 1 | |
90910-02154 | Bolt (for crankshaft bearing cap set) | 2.07 | 8 | |
90910-09129 | Cock assy, drain(for water inlet housing); Cock sub-assy, water drain (for cylinder block); Drain cock assy(for water inlet pipe) | 3.20 | 2 | |
90910-09087 | Plug | 1.82 | 2 | |
12121-31070 | Plate, oil pan baffle, no.1 | 47.45 | 1 | |
90341-12012 | Plug | 1.38 | 1 | |
12142-31030 | Guide, oil level gage, no.2 | 7.47 | 1 | |
12151-31010 | Gasket, oil pan | 6.90 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90250-10030 | Pin | 1.00 | 1 | |
90919-05057 | Sensor, crank position | 22.00 | 1 | |
96721-19010 | Ring, o | 1.16 | 1 | |
PAN SUB-ASSY, OIL, NO.2 | ||||
12102-31050 | Pan sub-assy, oil, no.2 | 58.66 | 1 | |
12102-31051 | Pan sub-assy, oil, no.2 | 58.66 | 1 | |
Subschemes | ||||
ENGINE OIL PUMP |