Engine oil pump for Toyota Carina ED ST160, 1 generation 08.1985 - 08.1989
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
S
X
Drive
FF
Transmission
AT
MT
Fuel
Gasoline
Engine
1S-ELU
Volume
1.80
Frame
E-ST160
Produсtion years
1985
1986
1987
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 13524-63010 | Pulley, oil pump drive shaft | Discontinued | 1 | |
| 15100-63010 | Pump assy, oil | 59.58 | 1 | |
| 15102-63010 | Rotor set, oil pump | 25.71 | 1 | |
| 15104-63021 | Strainer sub-assy, oil | 53.49 | 1 | |
| 15131-24010 | Valve, oil pump relief | 2.84 | 1 | |
| 15132-40010 | Spring, oil pump relief valve | 2.15 | 1 | |
| 15135-15010 | Plug, oil pump relief valve; Retainer, oil pump relief valve | 2.33 | 1 | |
|
15165-70010
|
Seal (for oil pump) | 1.00 | 1 | |
| 15188-63010 | Ring, o (for oil pump) | 8.55 | 1 | |
| 90179-08071 | Nut | 1.47 | - | |
| 90253-09001 | Pin | 1.00 | 2 | |
| 90311-42003 | Seal | 2.49 | 1 | |
| 91511-60616 | Clip | 1.00 | - | |
| 91611-60610 | Bolt | 1.00 | - | |
| 91611-60618 | Bolt(for oil receiver pipe) | 1.04 | - | |
| 91611-60625 | Bolt, w/washer (for parking cove & case) | 1.00 | - | |
| 91611-60635 | Bolt | 1.04 | - | |
| 96151-01500 | Ring, hole snap (for pressure regulator valve set) | 1.47 | - | |
| 96721-19020 | Ring, o (for oil strainer) | Discontinued | 1 | |
| GASKET, OIL PUMP | ||||
| 15197-63010 | Gasket, oil pump | 3.38 | 1 | |
| 15197-63020 | Gasket, oil pump | 3.38 | 1 | |
| BUSH (FOR OIL PUMP) | ||||
| 15186-70010 | Bush (for oil pump) | 3.45 | 1 | |
| 90029-38300 | Bush (for oil pump) | 3.45 | 1 | |
