Gear shift fork & lever shaft (mtm) for Toyota Corolla Axio E140, 1 generation 10.2006 - 09.2008
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
G
X
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NZE141
Produсtion years
2006
2007
2008
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90119-08A41 | Bolt | 1.00 | - | |
| 90201-08049 | Washer(for rear wheel cylinder) | 1.00 | - | |
| 94130-60800 | Nut | 1.00 | - | |
| 94531-00800 | Washer | 1.00 | - | |
| 90501-17040 | Spring, compression, no.1 (for select return) | 1.00 | 1 | |
| 33266-20020 | Plate, shift inter lock | 29.76 | 1 | |
| 33261-52110 | Shaft, shift & select lever | 82.82 | 1 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 33251-12090 | Lever, shift, inner no.1 | 28.38 | 1 | |
| 90501-16190 | Spring, compression, no.2 (for select return) | 1.00 | 1 | |
| 33506-17081 | Cover, control shaft | 22.77 | 1 | |
| 33240-16020 | Bracket assy, reverse shift arm | 35.20 | 1 | |
| 33243-20070 | Shaft, gear shift fork, no.2 | 18.12 | 1 | |
| 33244-52030 | Shaft, gear shift fork, no.3 | 21.22 | 1 | |
|
33213-20050
|
Fork, gear shift, no.2 | 13.89 | 1 | |
| 33276-12022 | Seat, select spring, no.1 | 3.28 | 1 | |
| 33252-12040 | Lever, shift, inner no.2 | 5.26 | 1 | |
| 33280-12061 | Pin assy, reverse restrict | 8.20 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
| 33212-10013 | Fork, gear shift, no.1 | 11.56 | 1 | |
| 90105-06115 | Bolt | 1.00 | 1 | |
| 33214-20050 | Fork, gear shift, no.3 | 15.53 | 1 | |
| 90254-05003 | Pin, slotted spring | 1.00 | 1 | |
| 33275-12041 | Seat, shift detent ball spring, no.1 | 1.64 | 3 | |
| 33211-12021 | Fork, reverse shift | 17.17 | 1 | |
| 90341-12004 | Plug (for differential lock shift fork shaft) | 1.21 | 3 | |
| 33531-12030 | Boot, dust (for shift & select lever shaft) | 8.37 | 1 | |
| 90311-18013 | Seal, oil | 1.49 | 1 | |
| 33232-20030 | Head, gear shift, no.1 | 18.81 | 1 | |
| 90520-12003 | Ring | 1.00 | 1 | |
| 33277-12011 | Seat, select spring, no.2 | 3.28 | 1 | |
| 33205-52010 | Shaft, gear shift fork, no.1 | 27.78 | 1 | |
| 90310-15004 | Seal, oil (for shift & select lever shaft) | 1.14 | 1 | |
| 33256-12022 | Lever, select inner | 5.95 | 1 | |
| 33584-12060 | Gasket, control shift lever retainer | 1.00 | 1 | |
| 90360-10003 | Ball (for 2nd gear bush) | 1.00 | 3 | |
| 90520-15003 | Ring, shaft snap | 1.00 | 1 | |
| 90930-03133 | Plug, breather | 3.19 | 1 | |
| 90369-15001 | Bearing, needle roller (for shift & select lever shaft) | 17.17 | 1 | |
| 33281-16020 | Pin, lever lock; Pin, lever lock (for control shift lever); Pin, lever lock (for floor shift); Pin, lever lock (for shift outer lever); Pin, lever lock (for transfer shift lever outer); Pin, lever lock (for transfer vacuum actuator); Pin, shift lever, no.1 | 1.00 | 1 | |
| 33544-12050 | Damper, shift lever | 33.82 | 1 | |
| 90360-06004 | Ball (for 1st gear bush) | 1.00 | 2 | |
|
90523-12003
|
Ring | 1.00 | 1 | |
| 33295-52010 | Pin, shift gate | 1.82 | 1 | |
| BALL ASSY, LOCK, NO.1 | ||||
| 33290-12011 | Ball assy, lock | Discontinued | 1 | |
| 33290-52040 | Ball assy, lock | 9.83 | 1 | |
| BOLT (FOR CONTROL SHAFT COVER) | ||||
| 90119-10288 | Bolt (for control shaft cover) | 1.00 | 2 | |
| 91612-61025 | Bolt (for control shaft cover) | 1.00 | 2 | |
| SPRING, COMPRESSION (FOR SHIFT DETENT BALL) | ||||
| 90501-12187 | Spring, compression (for shift detent ball) | 1.00 | 3 | |
| 90501-12207 | Spring, compression (for shift detent ball) | 1.00 | 3 | |
