Cylinder block for Toyota Corolla II L40, 3 generation, restyling 08.1992 - 08.1994
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
LIM
WIN
Drive
FF
Transmission
AT
MT
Fuel
Gasoline
Engine
4E-FE
Volume
1.30
Frame
E-EL41
Produсtion years
1992
1993
1994
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11452-11040 | Guide, oil level gage | Discontinued | 1 | |
| 15301-11030 | Gage sub-assy, oil level | Discontinued | 1 | |
| 90119-06719 | Bolt | 1.00 | - | |
| 90253-12001 | Pin, ring | Discontinued | 2 | |
| 90430-13002 | Gasket | 1.00 | 1 | |
| 90910-02019 | Bolt (for crankshaft bearing cap set) | 2.07 | 10 | |
| 96411-42500 | Plug | 2.07 | 2 | |
| 96411-43000 | Plug | 1.73 | 6 | |
|
96411-43500
|
Plug | 2.07 | 1 | |
| 96711-19010 | Ring, o | 1.38 | 1 | |
| 90250-06068 | Pin, straight | 1.00 | 2 | |
| 90341-12026 | Plug | 2.89 | 1 | |
| BLOCK SUB-ASSY, CYLINDER | ||||
| 11401-19565 | Block sub-assy, cylinder | 1,086.97 | 1 | |
| 11401-19566 | Block sub-assy, cylinder | 1,086.97 | 1 | |
| 11401-19567 | Block sub-assy, cylinder | 1,086.97 | 1 | |
| 11401-19568 | Block sub-assy, cylinder | 1,086.97 | 1 | |
| PAN SUB-ASSY, OIL | ||||
| 12101-10010 | Pan sub-assy, oil | 58.97 | 1 | |
| 12101-10011 | Pan sub-assy, oil | 92.31 | 1 | |
| GASKET(FOR OIL PAN DRAIN PLUG) | ||||
| 90430-12027 | Gasket | 1.00 | 1 | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| PLUG, WATER DRAIN COCK(FOR CYLINDER BLOCK) | ||||
| 90341-12026 | Plug | 2.89 | 1 | |
|
90345-52001
|
Cock sub-assy, water drain (for cylinder block) | 1.98 | 1 | |
| PIN, STRAIGHT(FOR CLUTCH HOUSING SET) | ||||
| 90250-10017 | Pin, straight | 1.03 | 1 | |
| 90253-15003 | Pin, straight (for clutch housing set) | 1.30 | 1 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| ENGINE OIL PUMP | ||||
