Cylinder block for Toyota Corolla II L40, 3 generation, restyling 08.1992 - 08.1994
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Grade
WIN
Drive
FF
Transmission
AT
MT
Fuel
Diesel
Engine
1N-T
Volume
1.50
Frame
X-NL40
Produсtion years
1992
1993
1994
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11401-59329 | Block sub-assy, cylinder | 1,880.63 | 1 | |
| 11448-55010 | Orifice, cylinder block oil | 3.11 | 1 | |
| 11452-55030 | Guide, oil level gage | 16.74 | 1 | |
| 12101-55010 | Pan sub-assy, oil | 129.40 | 1 | |
| 15301-55030 | Gage sub-assy, oil level | Discontinued | 1 | |
| 15790-55010 | Nozzle sub-assy, oil, no.1 | Discontinued | 4 | |
| 90105-10153 | Bolt (for crankshaft bearing cap set) | 2.50 | 10 | |
| 90116-06022 | Bolt, stud | 1.13 | - | |
| 90119-06167 | Bolt | 1.00 | - | |
| 90179-06045 | Nut | 1.04 | - | |
| 90250-06003 | Pin, straight | 1.00 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 1 | |
| 90253-10005 | Pin, straight (for engine rear oil seal) | 1.04 | 2 | |
| 90253-14001 | Pin | Discontinued | 2 | |
| 90253-15001 | Pin | 1.00 | 1 | |
| 90910-09088 | Cock sub-assy, water drain (for cylinder block) | 5.35 | 1 | |
| 90929-01259 | - | 3.45 | - | |
|
91611-60620
|
Screw or bolt (for valve rocker shaft lock) | 1.00 | - | |
| 96411-42000 | Plug, tight | 1.38 | 2 | |
| 96411-43000 | Plug | 1.73 | 2 | |
|
96411-43500
|
Plug | 2.07 | 5 | |
| GASKET(FOR OIL PAN DRAIN PLUG) | ||||
| 90430-12027 | Gasket | 1.00 | 1 | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| PLUG, WATER DRAIN COCK(FOR CYLINDER BLOCK) | ||||
| 90345-52003 | Cock sub-assy, water drain (for cylinder block) | 1.81 | 1 | |
| 90910-09087 | Plug | 1.82 | 1 | |
| PLUG(FOR OIL PAN DRAIN) | ||||
|
90341-12012
|
Plug | 1.38 | 1 | |
| 90341-12026 | Plug | 2.89 | 1 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| ENGINE OIL PUMP | ||||
| WATER PUMP | ||||
