Hood & front fender for Toyota Corolla Spacio E120, 2 generation, restyling 04.2003 - 06.2007
-
Grade
-
DriveFF
-
Engine1ZZ-FE
-
Volume1.80
-
Frame
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
SAER
X
Drive
FF
Transmission
AT
Fuel
Gasoline
Engine
1ZZ-FE
Volume
1.80
Frame
CBA-ZZE122N
Produсtion years
2005
2006
2007
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 53341-13010 | Insulator, hood | 50.04 | 1 | |
| 53851-13020 | Pad, front wheel opening extension, no.1 | 12.77 | 2 | |
| 53879-13010 | Retainer, front fender liner | 6.38 | 2 | |
| 90119-06137 | Bolt | 1.00 | - | |
|
90119-06877
|
Bolt, no.1 | 1.00 | - | |
|
90159-60488
|
Screw | 1.00 | - | |
|
90159-60602
|
Screw | 1.00 | - | |
|
90179-06274
|
Direct; Nut (for transmission control cable) | 1.00 | - | |
|
90189-06013
|
Clip, front fender liner | 1.00 | - | |
|
90467-05138
|
Clip (for front bumper retainer) | 1.54 | - | |
| 90467-07132 | Clip, headlining | 1.00 | - | |
| 90467-08124 | Clip | 1.10 | - | |
|
90467-10183
|
Clip | 1.00 | - | |
| 90541-15019 | Cushion | 1.73 | - | |
| 53301-13050 | Hood sub-assy | 214.15 | 1 | |
| 53875-13020 | Liner, front fender, rh | 47.45 | 1 | |
| 53876-13020 | Liner, front fender, lh | 47.45 | 1 | |
| 53835-13030 | Brace, front fender to apron, rh | 4.05 | 1 | |
| 53381-13020 | Seal, hood to radiator support | 14.32 | 1 | |
|
90467-08011
|
Clip | 1.00 | 9 | |
| 53827-13050 | Protector, front fender side panel, rh | 23.21 | 1 | |
| 53836-13030 | Brace, front fender to extension, lh | 4.05 | 1 | |
| 53828-13030 | Protector, front fender side panel, lh | 23.21 | 1 | |
| 53882-16030 | Pad, rear bumper, center | 1.00 | 2 | |
| FENDER SUB-ASSY, FRONT RH | ||||
| 53811-13100 | Fender sub-assy, front rh | 271.74 | 1 | |
| 53811-13110 | Fender sub-assy, front rh | 271.74 | 1 | |
| FENDER SUB-ASSY, FRONT LH | ||||
| 53812-13090 | Fender sub-assy, front lh | 271.74 | 1 | |
| 53812-13100 | Fender sub-assy, front lh | 181.92 | 1 | |
| Subschemes | ||||
| HOLE PLUG | ||||
