Transfer case & extension housing for Toyota Corona Exiv T200, 2 generation, restyling 08.1995 - 12.1998
-
Transmission
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
GT4WD
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
3S-GE
Volume
2.00
Frame
E-ST205
Produсtion years
1995
1996
1997
1998
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33117-32030 | Protector, transfer case | Discontinued | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| 33183-20050 | Damper, transfer dynamic | 69.88 | 1 | |
| 34303-32010 | Strainer sub-assy, transfer oil | 32.09 | 1 | |
| 34439-32010 | Strainer, transfer valve body | Discontinued | 1 | |
| 36101-20010 | Case sub-assy, transfer | 1,009.33 | 1 | |
| 36102-32010 | Retainer sub-assy, transfer rh bearing | Discontinued | 1 | |
| 36109-32010 | Housing sub-assy, transfer extension | 89.72 | 1 | |
| 36118-20030 | Plate, transfer stiffener, rh | 56.94 | 1 | |
| 36119-32021 | Plate, transfer stiffener, center | 41.24 | 1 | |
| 36124-32010 | Cover, transfer inspection hole | 4.05 | 1 | |
| 36141-32010 | Gasket, transfer case | Discontinued | 2 | |
| 36142-12010 | Gasket, transfer cover | 2.93 | 2 | |
| 36403-20030 | Tube sub-assy, transfer oil filler | 20.45 | 1 | |
| 36404-20030 | Gage sub-assy, transfer oil level | 7.33 | 1 | |
| 90105-08040 | Bolt | 1.00 | 2 | |
| 90105-08068 | Bolt | 1.04 | - | |
| 90105-08129 | - | 1.19 | - | |
| 90105-08173 | - | 1.12 | - | |
| 90105-10216 | Bolt (for transfer oil receiver no.1) | 1.04 | - | |
| 90105-10237 | Bolt | 1.00 | - | |
| 90105-10238 | - | 2.07 | - | |
| 90119-08276 | - | Discontinued | - | |
| 90179-10016 | Nut | 1.00 | - | |
| 90179-12032 | Nut | 2.24 | - | |
| 90301-05002 | Plug, o (for transfer pinion bearing cage plug); Ring, o (for front support) | Discontinued | 1 | |
| 90301-06008 | Gasket, overdrive brake | 1.00 | 1 | |
| 90301-06196 | O ring, transaxle case, no.1 | 1.30 | 1 | |
| 90301-09173 | Ring, o | 1.21 | 1 | |
| 90301-63005 | Ring, o (for transfer extension housing) | 1.55 | 1 | |
| 90301-85003 | Ring, o (for transfer rh bearing retainer) | 1.47 | 1 | |
| 90301-94001 | Ring, o | Discontinued | 1 | |
| 90310-50002 | Seal, oil | 1.56 | 1 | |
|
90311-38032
|
Seal, oil | 2.84 | 1 | |
| 90316-52001 | Seal, oil, no.1 (for transfer rh bearing retainer) | 3.55 | 1 | |
|
90316-61001
|
Seal, oil (for transfer case lh) | 4.33 | 1 | |
| 90334-09004 | Plug, straight (for transfer pinion bearing cage) | Discontinued | 1 | |
| 90341-08001 | Plug | 1.04 | 1 | |
| 90341-18021 | Plug (for front differential drain) | 1.63 | 1 | |
| 90404-51059 | Union, breather | 1.99 | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
| 91511-61020 | Bolt | 1.12 | - | |
| 91511-61050 | Bolt, flange (for idler) | Discontinued | - | |
| 91512-61045 | Bolt | 1.21 | - | |
| 91651-40612 | Bolt | 1.00 | - | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12027 | Bolt, stud (for transfer & transaxle setting) | 2.50 | 1 | |
| 90116-12028 | Bolt, stud (for transfer & transaxle setting) | 3.54 | 2 | |
| 90116-12029 | Bolt, stud (for transfer & transaxle setting) | 3.19 | 2 | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-12005 | Pin, straight | 1.90 | 2 | |
| 90254-10003 | Pin | 3.97 | 2 | |
| BOLT (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90105-12137 | Bolt (for transfer & transaxle setting) | Discontinued | 1 | |
| 90105-12161 | Bolt (for transfer & transaxle setting) | 3.36 | 1 | |
| 90105-12162 | Bolt (for transfer & transaxle setting) | 2.50 | 1 | |
| Subschemes | ||||
| TRANSMISSION CASE & OIL PAN (ATM) | ||||
| THROTTLE LINK & VALVE LEVER (ATM) | ||||
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
GT4WD
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
3S-GE
Volume
2.00
Frame
E-ST205
Produсtion years
1995
1996
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33117-32030 | Protector, transfer case | Discontinued | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| 33183-20050 | Damper, transfer dynamic | 69.88 | 1 | |
| 36109-20012 | Housing sub-assy, transfer extension | 94.03 | 1 | |
| 36116-12010 | Cage, transfer pinion bearing | 75.05 | 1 | |
| 36118-32011 | Plate, transfer stiffener, rh | Discontinued | 1 | |
| 36119-32010 | Plate, transfer stiffener, center | 39.77 | 1 | |
| 36124-12010 | Cover, transfer inspection hole | 4.05 | 1 | |
| 36129-20010 | Tube, transfer oil | 12.08 | 1 | |
| 90105-08040 | Bolt | 1.00 | 2 | |
| 90105-08129 | - | 1.19 | - | |
| 90105-10210 | - | 1.90 | - | |
| 90105-10216 | Bolt (for transfer oil receiver no.1) | 1.04 | - | |
| 90105-12137 | Bolt (for transfer & transaxle setting) | Discontinued | 3 | |
| 90116-12018 | Bolt, stud (for transfer & transaxle setting) | Discontinued | 3 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-10016 | Nut | 1.00 | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
| 90301-63005 | Ring, o (for transfer extension housing) | 1.55 | 1 | |
| 90301-99049 | Ring, o (for transfer pinion bearing cage) | 3.02 | 1 | |
|
90311-38032
|
Seal, oil | 2.84 | 1 | |
|
90311-47003
|
Seal, oil | 5.47 | 1 | |
| 90331-08002 | Plug, tight | 1.00 | 1 | |
| 90331-14004 | Pin, ring (for manual transmission case) | 2.93 | 1 | |
| 90341-12004 | Plug (for differential lock shift fork shaft) | 1.21 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18023 | Gasket (for rear differential filler plug) | 1.64 | 1 | |
| 90341-22001 | Plug | Discontinued | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
| 90430-22002 | Gasket | 2.42 | 1 | |
| 90540-06027 | Cushion (for transfer oil tube) | Discontinued | 1 | |
| 91511-61045 | Bolt, flange (for idler) | 2.33 | - | |
| 91512-61020 | - | 1.12 | - | |
|
91512-61035
|
Bolt | 1.00 | - | |
| 91611-60816 | Bolt | 1.00 | - | |
| 91611-60820 | Bolt | 1.08 | - | |
| 91611-61030 | - | 1.00 | - | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90250-12005 | Pin, straight | 1.90 | 2 | |
| CASE, TRANSFER, LH | ||||
| 36114-12030 | Case, transfer, lh | 259.67 | 1 | |
| 36114-12050 | Case, transfer, lh | 263.12 | 1 | |
| CASE, TRANSFER, RH | ||||
| 36113-20030 | Case, transfer, rh | 350.25 | 1 | |
| 36113-20040 | Case, transfer, rh | 184.61 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
GT4WD
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
3S-GE
Volume
2.00
Frame
E-ST205
Produсtion years
1996
1997
1998
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33117-32030 | Protector, transfer case | Discontinued | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| 33183-20050 | Damper, transfer dynamic | 69.88 | 1 | |
| 36109-20012 | Housing sub-assy, transfer extension | 94.03 | 1 | |
| 36113-20040 | Case, transfer, rh | 184.61 | 1 | |
| 36114-12050 | Case, transfer, lh | 263.12 | 1 | |
| 36116-12010 | Cage, transfer pinion bearing | 75.05 | 1 | |
| 36118-32011 | Plate, transfer stiffener, rh | Discontinued | 1 | |
| 36119-32010 | Plate, transfer stiffener, center | 39.77 | 1 | |
| 36124-12010 | Cover, transfer inspection hole | 4.05 | 1 | |
| 36129-20010 | Tube, transfer oil | 12.08 | 1 | |
| 90105-08040 | Bolt | 1.00 | 2 | |
| 90105-08129 | - | 1.19 | - | |
| 90105-10210 | - | 1.90 | - | |
| 90105-10216 | Bolt (for transfer oil receiver no.1) | 1.04 | - | |
| 90105-12137 | Bolt (for transfer & transaxle setting) | Discontinued | 3 | |
| 90116-12018 | Bolt, stud (for transfer & transaxle setting) | Discontinued | 3 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-10016 | Nut | 1.00 | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
| 90301-63005 | Ring, o (for transfer extension housing) | 1.55 | 1 | |
| 90301-99049 | Ring, o (for transfer pinion bearing cage) | 3.02 | 1 | |
|
90311-38032
|
Seal, oil | 2.84 | 1 | |
|
90311-47003
|
Seal, oil | 5.47 | 1 | |
| 90331-08002 | Plug, tight | 1.00 | 1 | |
| 90331-14004 | Pin, ring (for manual transmission case) | 2.93 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18023 | Gasket (for rear differential filler plug) | 1.64 | 1 | |
| 90341-22001 | Plug | Discontinued | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
| 90430-22002 | Gasket | 2.42 | 1 | |
| 90540-06027 | Cushion (for transfer oil tube) | Discontinued | 1 | |
| 91511-61045 | Bolt, flange (for idler) | 2.33 | - | |
| 91512-61020 | - | 1.12 | - | |
|
91512-61035
|
Bolt | 1.00 | - | |
| 91611-60816 | Bolt | 1.00 | - | |
| 91611-60820 | Bolt | 1.08 | - | |
| 91611-61030 | - | 1.00 | - | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90250-12005 | Pin, straight | 1.90 | 2 | |