Transfer case & extension housing for Toyota Corsa L50, 5 generation, restyling 12.1997 - 08.1999
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Sedan
Grade
AX
CYN
MOA
VITX
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
5E-FE
Volume
1.50
Frame
E-EL55
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 36111-16010 | Case, transfer | 246.73 | 1 | |
| 36118-16011 | Plate, transfer stiffener, rh | 92.31 | 1 | |
| 36121-16010 | Cover, transfer case, no.1 | 67.29 | 1 | |
| 36184-16010 | Separator, transfer oil | 3.02 | 1 | |
| 41304-16010 | Nut sub-assy, center differential bearing adjusting | 64.70 | 1 | |
| 41316-16010 | Plate, center differential bearing adjusting nut lock | 2.07 | 1 | |
| 90116-12033 | Bolt, stud (for transfer & transaxle setting) | 2.42 | 4 | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
| 90301-79002 | Ring, o (for center differential bearing adjusting nut) | Discontinued | 1 | |
|
90311-38042
|
Seal, oil | 2.20 | 1 | |
| 90311-47009 | Seal, oil | 4.33 | 1 | |
|
90311-54004
|
Seal, oil | 2.49 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18045 | Plug | 2.67 | 1 | |
|
90341-18057
|
Plug | 3.02 | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
|
90930-03031
|
Deflector, dust (for steering knuckle) | 3.20 | 1 | |
| 91511-60612 | Bolt | 1.00 | - | |
| 91511-60814 | - | 1.00 | - | |
| 91511-60820 | Bolt | 1.00 | - | |
| BOLT (FOR TRANSFER STIFFENER PLATE) | ||||
| 91511-60825 | Bolt (for transfer stiffener plate) | 1.00 | 7 | |
| 91511-60845 | Bolt (for transfer stiffener plate) | 1.55 | 1 | |
Scheme fits to:
Steering wheel
Right
Body style
Hatchback
Sedan
Grade
AX
CYN
MOA
VITX
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
5E-FE
Volume
1.50
Frame
E-EL55
Produсtion years
1997
1998
1999
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 36111-16010 | Case, transfer | 246.73 | 1 | |
| 36118-16021 | Plate, transfer stiffener, rh | 89.72 | 1 | |
| 36121-16010 | Cover, transfer case, no.1 | 67.29 | 1 | |
| 36184-16010 | Separator, transfer oil | 3.02 | 1 | |
| 41304-16010 | Nut sub-assy, center differential bearing adjusting | 64.70 | 1 | |
| 41316-16010 | Plate, center differential bearing adjusting nut lock | 2.07 | 1 | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90301-79002 | Ring, o (for center differential bearing adjusting nut) | Discontinued | 1 | |
|
90311-38042
|
Seal, oil | 2.20 | 1 | |
| 90311-47009 | Seal, oil | 4.33 | 1 | |
|
90311-54004
|
Seal, oil | 2.49 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18045 | Plug | 2.67 | 1 | |
|
90341-18057
|
Plug | 3.02 | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
|
90930-03031
|
Deflector, dust (for steering knuckle) | 3.20 | 1 | |
| 91511-60612 | Bolt | 1.00 | - | |
| 91511-60814 | - | 1.00 | - | |
| 91511-60820 | Bolt | 1.00 | - | |
| BOLT, STUD (FOR TRANSFER & TRANSAXLE SETTING) | ||||
| 90116-12033 | Bolt, stud (for transfer & transaxle setting) | 2.42 | 4 | |
| 90116-12034 | Bolt, stud | 1.64 | 2 | |
| BOLT (FOR TRANSFER STIFFENER PLATE) | ||||
| 91511-60825 | Bolt (for transfer stiffener plate) | 1.00 | 7 | |
| 91511-60845 | Bolt (for transfer stiffener plate) | 1.55 | 1 | |