Front axle housing & differential for Toyota Hilux Surf N180, 3 generation, restyling 08.1998 - 06.2000
-
Grade
-
Transmission
-
Fuel
-
Engine
-
Volume
-
Frame
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRX
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
3RZ-FE
Volume
2.70
Frame
GF-RZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 41039-34050 | Gear kit, differential | 110.42 | 1 | |
| 41101-35131 | Carrier sub-assy, differential, front | 351.11 | 1 | |
| 41201-80098 | Final gear kit, differential, front | 515.02 | 1 | |
| 41204-35060 | Flange sub-assy, front drive pinion companion, front | 46.58 | 1 | |
| 41214-35020 | Slinger, front differential drive pinion oil; Slinger, rear differential drive pinion oil | 3.28 | 1 | |
|
41222-35030
|
Plate, fornt differential ring gear set bolt lock; Plate, front axle differential ring gear set bolt lock; Plate, rear differential ring gear set bolt lock | 1.04 | 5 | |
|
41231-22010
|
Spacer, front axle differential drive pinion bearing; Spacer, front differential drive pinion bearing; Spacer, rear differential drive pinion bearing | 4.89 | 1 | |
| 41252-35030 | Deflector, dust (for front differential) | 3.88 | 1 | |
| 41306-35030 | Shaft sub-assy, differential side gear inter | 81.09 | 1 | |
| 41311-35060 | Case, front differential | 194.96 | 1 | |
| 41320-35040 | Tube assy, front differential | 106.11 | 1 | |
| 41331-35070 | Gear, front differential side | 110.42 | 2 | |
| 41337-35020 | Shaft sub-assy, differential side gear, rh | 75.05 | 1 | |
| 41341-30020 | Pinion, front axle differential; Pinion, front differential; Pinion, rear differential | 24.42 | 2 | |
|
41351-30060
|
Washer, front axle differential pinion thrust; Washer, front differential pinion thrust; Washer, rear differential pinion thrust | 1.17 | 2 | |
| 41433-35010 | Sleeve, differential clutch | 36.58 | 1 | |
| 41434-35020 | Hub, differential clutch | 15.70 | 1 | |
| 41435-35010 | Case, differential clutch | 42.96 | 1 | |
| 41436-35020 | Cover, front differential clutch case | Discontinued | 1 | |
| 41441-35010 | Fork, differential shift | 25.28 | 1 | |
| 41653-35030 | Stopper, differential mount, upper | 4.49 | 2 | |
| 41654-26010 | Stopper, differential mount, lower | 6.04 | 2 | |
| 41655-35010 | Nut, front differential mount, no.1 | Discontinued | 1 | |
| 41993-35010 | Label, differential oil information | 1.13 | 1 | |
|
52380-35010
|
Support assy, differential | 36.92 | 1 | |
| 90101-11353 | Bolt | 1.00 | 10 | |
| 90105-10391 | Bolt | 1.29 | 10 | |
| 90105-12272 | Bolt | 1.21 | - | |
| 90105-14090 | Bolt | 1.47 | - | |
| 90119-14057 | Bolt | 6.73 | - | |
| 90179-14063 | Nut | 1.00 | - | |
| 90179-18020 | Nut | 1.09 | 1 | |
| 90250-06058 | Pin | 1.32 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 90301-68003 | Ring, o (for front differential tube) | 3.02 | 1 | |
| 90311-38049 | Seal, oil (for front differential carrier) | 2.98 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
|
90341-18032
|
Plug | 1.81 | 1 | |
|
90341-24014
|
Plug | 2.68 | 1 | |
|
90364-33009
|
Bearing | 11.72 | 2 | |
| 90366-30022 | Bearing | 8.11 | 1 | |
|
90366-35023
|
Bearing | 10.50 | 1 | |
|
90368-50006
|
Bearing | 20.89 | 2 | |
| 90404-08004 | Union (for front differential) | 1.21 | 1 | |
|
90430-24003
|
Gasket | 1.00 | 1 | |
|
90521-29002
|
Ring, hole snap (for diff side gear intermeddiate shaft); Ring, hole snap (for differential side gear shaft); Ring, hole snap (for front drive shaft lh); Ring, shaft snap (for front drive inner shaft outer) | 1.00 | 1 | |
|
90903-63008
|
Bearing | 15.20 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
|
96152-00300
|
Ring | 1.00 | 1 | |
| WASHER, FRONT DIFFERENTIAL SIDE GEAR THRUST, NO.1 | ||||
| 41361-30040 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| 41361-30050 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30060 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30070 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| SHAFT, FRONT DIFFERENTIAL PINION, NO.1 | ||||
| 41342-22020 | Shaft, front axle differential pinion; Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| 41342-22021 | Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| WASHER, PLATE (FOR FRONT DIFFERENTIAL CASE) | ||||
| 90564-50092 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50093 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50094 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50095 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50096 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50097 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50098 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50099 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50100 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50101 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50102 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50103 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50104 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50105 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50106 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50107 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50108 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50109 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50110 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50111 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50112 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50113 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50114 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50115 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50116 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50117 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50118 | Washer, plate (for front differential case) | 4.06 | 2 | |
| CARRIER ASSY, DIFFERENTIAL, FRONT | ||||
| 41110-34241 | Carrier assy, differential, front | 1,794.37 | 1 | |
| 41110-3D160 | Carrier assy, differential, front | 1,820.25 | 1 | |
| GEAR, DIFFERENTIAL RING | ||||
|
90201-35497
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35498 | Gear, differential ring | 1.55 | 1 | |
| 90201-35499 | Gear, differential ring | 1.55 | 1 | |
|
90201-35500
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35501 | Gear, differential ring | 1.55 | 1 | |
| 90201-35502 | Gear, differential ring | 1.55 | 1 | |
| 90201-35503 | Gear, differential ring | 1.55 | 1 | |
| 90201-35504 | Gear, differential ring | 1.55 | 1 | |
| 90201-35505 | Gear, differential ring | 1.55 | 1 | |
| 90201-35506 | Gear, differential ring | 1.55 | 1 | |
| 90201-35507 | Gear, differential ring | 1.55 | 1 | |
| 90201-35508 | Gear, differential ring | 1.55 | 1 | |
| 90201-35509 | Gear, differential ring | 1.55 | 1 | |
| 90201-35510 | Gear, differential ring | 1.55 | 1 | |
| 90201-35511 | Gear, differential ring | 1.55 | 1 | |
| 90201-35512 | Gear, differential ring | 1.55 | 1 | |
| 90201-35513 | Gear, differential ring | 1.55 | 1 | |
| 90201-35514 | Gear, differential ring | 1.55 | 1 | |
| 90201-35515 | Gear, differential ring | 1.04 | 1 | |
| 90201-35516 | Gear, differential ring | 1.04 | 1 | |
| 90201-35517 | Gear, differential ring | 1.04 | 1 | |
| 90201-35518 | Gear, differential ring | 1.04 | 1 | |
| SUPPORT, FRONT DIFFERENTIAL, NO.2 | ||||
| 52380-35040 | Support, front differential, no.2 | 61.25 | 1 | |
| 52380-35050 | Support, front differential, no.2 | 62.11 | 1 | |
| RING, SHAFT SNAP (FOR DIFFERENTIAL SIDE GEAR SHAFT RH) | ||||
|
90520-39023
|
Ring, shaft snap (for differential side gear shaft rh) | 1.90 | 1 | |
| 90520-75002 | Ring, shaft snap | 1.81 | 1 | |
| 90521-86002 | Ring, shaft snap | 1.81 | 1 | |
| BOLT (FOR DIFFERENTIAL CLUTCH CASE SETTING) | ||||
|
90107-12001
|
Bolt (for differential clutch case setting) | 3.74 | 2 | |
|
90109-12029
|
Bolt (for differential clutch case setting) | 1.55 | 4 | |
| ACTUATOR ASSY, DIFFERENTIAL VACUUM | ||||
| 41400-34011 | Actuator assy, differential vacuum | 205.53 | 1 | |
| 41400-35020 | Actuator assy, differential vacuum | 100.07 | 1 | |
| Subschemes | ||||
| FRONT DRIVE SHAFT | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSR
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
3RZ-FE
Volume
2.70
Frame
GF-RZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 41039-34050 | Gear kit, differential | 110.42 | 1 | |
| 41101-35131 | Carrier sub-assy, differential, front | 351.11 | 1 | |
| 41110-3D160 | Carrier assy, differential, front | 1,820.25 | 1 | |
| 41201-80098 | Final gear kit, differential, front | 515.02 | 1 | |
| 41204-35060 | Flange sub-assy, front drive pinion companion, front | 46.58 | 1 | |
| 41214-35020 | Slinger, front differential drive pinion oil; Slinger, rear differential drive pinion oil | 3.28 | 1 | |
|
41222-35030
|
Plate, fornt differential ring gear set bolt lock; Plate, front axle differential ring gear set bolt lock; Plate, rear differential ring gear set bolt lock | 1.04 | 5 | |
|
41231-22010
|
Spacer, front axle differential drive pinion bearing; Spacer, front differential drive pinion bearing; Spacer, rear differential drive pinion bearing | 4.89 | 1 | |
| 41252-35030 | Deflector, dust (for front differential) | 3.88 | 1 | |
| 41306-35030 | Shaft sub-assy, differential side gear inter | 81.09 | 1 | |
| 41311-35060 | Case, front differential | 194.96 | 1 | |
| 41320-35040 | Tube assy, front differential | 106.11 | 1 | |
| 41331-35070 | Gear, front differential side | 110.42 | 2 | |
| 41337-35020 | Shaft sub-assy, differential side gear, rh | 75.05 | 1 | |
| 41341-30020 | Pinion, front axle differential; Pinion, front differential; Pinion, rear differential | 24.42 | 2 | |
|
41351-30060
|
Washer, front axle differential pinion thrust; Washer, front differential pinion thrust; Washer, rear differential pinion thrust | 1.17 | 2 | |
| 41400-35020 | Actuator assy, differential vacuum | 100.07 | 1 | |
| 41433-35010 | Sleeve, differential clutch | 36.58 | 1 | |
| 41434-35020 | Hub, differential clutch | 15.70 | 1 | |
| 41435-35010 | Case, differential clutch | 42.96 | 1 | |
| 41436-35020 | Cover, front differential clutch case | Discontinued | 1 | |
| 41441-35010 | Fork, differential shift | 25.28 | 1 | |
| 41653-35030 | Stopper, differential mount, upper | 4.49 | 2 | |
| 41654-26010 | Stopper, differential mount, lower | 6.04 | 2 | |
| 41655-35010 | Nut, front differential mount, no.1 | Discontinued | 1 | |
| 41993-35010 | Label, differential oil information | 1.13 | 1 | |
|
52380-35010
|
Support assy, differential | 36.92 | 1 | |
| 90101-11353 | Bolt | 1.00 | 10 | |
| 90105-10391 | Bolt | 1.29 | 10 | |
| 90105-12272 | Bolt | 1.21 | - | |
| 90105-14090 | Bolt | 1.47 | - | |
| 90119-14057 | Bolt | 6.73 | - | |
| 90179-14063 | Nut | 1.00 | - | |
| 90179-18020 | Nut | 1.09 | 1 | |
| 90250-06058 | Pin | 1.32 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 90301-68003 | Ring, o (for front differential tube) | 3.02 | 1 | |
| 90311-38049 | Seal, oil (for front differential carrier) | 2.98 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
|
90341-18032
|
Plug | 1.81 | 1 | |
|
90341-24014
|
Plug | 2.68 | 1 | |
|
90364-33009
|
Bearing | 11.72 | 2 | |
| 90366-30022 | Bearing | 8.11 | 1 | |
|
90366-35023
|
Bearing | 10.50 | 1 | |
|
90368-50006
|
Bearing | 20.89 | 2 | |
| 90404-08004 | Union (for front differential) | 1.21 | 1 | |
|
90430-24003
|
Gasket | 1.00 | 1 | |
|
90521-29002
|
Ring, hole snap (for diff side gear intermeddiate shaft); Ring, hole snap (for differential side gear shaft); Ring, hole snap (for front drive shaft lh); Ring, shaft snap (for front drive inner shaft outer) | 1.00 | 1 | |
|
90903-63008
|
Bearing | 15.20 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
|
96152-00300
|
Ring | 1.00 | 1 | |
| WASHER, FRONT DIFFERENTIAL SIDE GEAR THRUST, NO.1 | ||||
| 41361-30040 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| 41361-30050 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30060 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30070 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| SHAFT, FRONT DIFFERENTIAL PINION, NO.1 | ||||
| 41342-22020 | Shaft, front axle differential pinion; Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| 41342-22021 | Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| WASHER, PLATE (FOR FRONT DIFFERENTIAL CASE) | ||||
| 90564-50092 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50093 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50094 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50095 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50096 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50097 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50098 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50099 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50100 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50101 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50102 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50103 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50104 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50105 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50106 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50107 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50108 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50109 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50110 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50111 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50112 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50113 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50114 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50115 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50116 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50117 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50118 | Washer, plate (for front differential case) | 4.06 | 2 | |
| GEAR, DIFFERENTIAL RING | ||||
|
90201-35497
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35498 | Gear, differential ring | 1.55 | 1 | |
| 90201-35499 | Gear, differential ring | 1.55 | 1 | |
|
90201-35500
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35501 | Gear, differential ring | 1.55 | 1 | |
| 90201-35502 | Gear, differential ring | 1.55 | 1 | |
| 90201-35503 | Gear, differential ring | 1.55 | 1 | |
| 90201-35504 | Gear, differential ring | 1.55 | 1 | |
| 90201-35505 | Gear, differential ring | 1.55 | 1 | |
| 90201-35506 | Gear, differential ring | 1.55 | 1 | |
| 90201-35507 | Gear, differential ring | 1.55 | 1 | |
| 90201-35508 | Gear, differential ring | 1.55 | 1 | |
| 90201-35509 | Gear, differential ring | 1.55 | 1 | |
| 90201-35510 | Gear, differential ring | 1.55 | 1 | |
| 90201-35511 | Gear, differential ring | 1.55 | 1 | |
| 90201-35512 | Gear, differential ring | 1.55 | 1 | |
| 90201-35513 | Gear, differential ring | 1.55 | 1 | |
| 90201-35514 | Gear, differential ring | 1.55 | 1 | |
| 90201-35515 | Gear, differential ring | 1.04 | 1 | |
| 90201-35516 | Gear, differential ring | 1.04 | 1 | |
| 90201-35517 | Gear, differential ring | 1.04 | 1 | |
| 90201-35518 | Gear, differential ring | 1.04 | 1 | |
| SUPPORT, FRONT DIFFERENTIAL, NO.2 | ||||
| 52380-35040 | Support, front differential, no.2 | 61.25 | 1 | |
| 52380-35050 | Support, front differential, no.2 | 62.11 | 1 | |
| RING, SHAFT SNAP (FOR DIFFERENTIAL SIDE GEAR SHAFT RH) | ||||
|
90520-39023
|
Ring, shaft snap (for differential side gear shaft rh) | 1.90 | 1 | |
| 90520-75002 | Ring, shaft snap | 1.81 | 1 | |
| 90521-86002 | Ring, shaft snap | 1.81 | 1 | |
| BOLT (FOR DIFFERENTIAL CLUTCH CASE SETTING) | ||||
|
90107-12001
|
Bolt (for differential clutch case setting) | 3.74 | 2 | |
|
90109-12029
|
Bolt (for differential clutch case setting) | 1.55 | 4 | |
| Subschemes | ||||
| FRONT DRIVE SHAFT | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRG
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
3RZ-FE
Volume
2.70
Frame
GF-RZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 41039-34050 | Gear kit, differential | 110.42 | 1 | |
| 41101-35131 | Carrier sub-assy, differential, front | 351.11 | 1 | |
| 41201-80079 | Final gear kit, differential, front | 515.02 | 1 | |
| 41204-35060 | Flange sub-assy, front drive pinion companion, front | 46.58 | 1 | |
| 41214-35020 | Slinger, front differential drive pinion oil; Slinger, rear differential drive pinion oil | 3.28 | 1 | |
|
41222-35030
|
Plate, fornt differential ring gear set bolt lock; Plate, front axle differential ring gear set bolt lock; Plate, rear differential ring gear set bolt lock | 1.04 | 5 | |
|
41231-22010
|
Spacer, front axle differential drive pinion bearing; Spacer, front differential drive pinion bearing; Spacer, rear differential drive pinion bearing | 4.89 | 1 | |
| 41252-35030 | Deflector, dust (for front differential) | 3.88 | 1 | |
| 41306-35030 | Shaft sub-assy, differential side gear inter | 81.09 | 1 | |
| 41311-35060 | Case, front differential | 194.96 | 1 | |
| 41320-35040 | Tube assy, front differential | 106.11 | 1 | |
| 41331-35070 | Gear, front differential side | 110.42 | 2 | |
| 41337-35020 | Shaft sub-assy, differential side gear, rh | 75.05 | 1 | |
| 41341-30020 | Pinion, front axle differential; Pinion, front differential; Pinion, rear differential | 24.42 | 2 | |
|
41351-30060
|
Washer, front axle differential pinion thrust; Washer, front differential pinion thrust; Washer, rear differential pinion thrust | 1.17 | 2 | |
| 41433-35010 | Sleeve, differential clutch | 36.58 | 1 | |
| 41434-35020 | Hub, differential clutch | 15.70 | 1 | |
| 41435-35010 | Case, differential clutch | 42.96 | 1 | |
| 41436-35020 | Cover, front differential clutch case | Discontinued | 1 | |
| 41441-35010 | Fork, differential shift | 25.28 | 1 | |
| 41653-35030 | Stopper, differential mount, upper | 4.49 | 2 | |
| 41654-26010 | Stopper, differential mount, lower | 6.04 | 2 | |
| 41655-35010 | Nut, front differential mount, no.1 | Discontinued | 1 | |
| 41993-35010 | Label, differential oil information | 1.13 | 1 | |
|
52380-35010
|
Support assy, differential | 36.92 | 1 | |
| 90101-11353 | Bolt | 1.00 | 10 | |
| 90105-10391 | Bolt | 1.29 | 10 | |
| 90105-12272 | Bolt | 1.21 | - | |
| 90105-14090 | Bolt | 1.47 | - | |
| 90119-14057 | Bolt | 6.73 | - | |
| 90179-14063 | Nut | 1.00 | - | |
| 90179-18020 | Nut | 1.09 | 1 | |
| 90250-06058 | Pin | 1.32 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 90301-68003 | Ring, o (for front differential tube) | 3.02 | 1 | |
| 90311-38049 | Seal, oil (for front differential carrier) | 2.98 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
|
90341-18032
|
Plug | 1.81 | 1 | |
|
90341-24014
|
Plug | 2.68 | 1 | |
|
90364-33009
|
Bearing | 11.72 | 2 | |
| 90366-30022 | Bearing | 8.11 | 1 | |
|
90366-35023
|
Bearing | 10.50 | 1 | |
|
90368-50006
|
Bearing | 20.89 | 2 | |
| 90404-08004 | Union (for front differential) | 1.21 | 1 | |
|
90430-24003
|
Gasket | 1.00 | 1 | |
|
90521-29002
|
Ring, hole snap (for diff side gear intermeddiate shaft); Ring, hole snap (for differential side gear shaft); Ring, hole snap (for front drive shaft lh); Ring, shaft snap (for front drive inner shaft outer) | 1.00 | 1 | |
|
90903-63008
|
Bearing | 15.20 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
|
96152-00300
|
Ring | 1.00 | 1 | |
| WASHER, FRONT DIFFERENTIAL SIDE GEAR THRUST, NO.1 | ||||
| 41361-30040 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| 41361-30050 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30060 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30070 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| SHAFT, FRONT DIFFERENTIAL PINION, NO.1 | ||||
| 41342-22020 | Shaft, front axle differential pinion; Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| 41342-22021 | Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| WASHER, PLATE (FOR FRONT DIFFERENTIAL CASE) | ||||
| 90564-50092 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50093 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50094 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50095 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50096 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50097 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50098 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50099 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50100 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50101 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50102 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50103 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50104 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50105 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50106 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50107 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50108 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50109 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50110 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50111 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50112 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50113 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50114 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50115 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50116 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50117 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50118 | Washer, plate (for front differential case) | 4.06 | 2 | |
| CARRIER ASSY, DIFFERENTIAL, FRONT | ||||
| 41110-35831 | Carrier assy, differential, front | 1,820.25 | 1 | |
| 41110-3D321 | Carrier assy, differential, front | 1,328.52 | 1 | |
| GEAR, DIFFERENTIAL RING | ||||
|
90201-35497
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35498 | Gear, differential ring | 1.55 | 1 | |
| 90201-35499 | Gear, differential ring | 1.55 | 1 | |
|
90201-35500
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35501 | Gear, differential ring | 1.55 | 1 | |
| 90201-35502 | Gear, differential ring | 1.55 | 1 | |
| 90201-35503 | Gear, differential ring | 1.55 | 1 | |
| 90201-35504 | Gear, differential ring | 1.55 | 1 | |
| 90201-35505 | Gear, differential ring | 1.55 | 1 | |
| 90201-35506 | Gear, differential ring | 1.55 | 1 | |
| 90201-35507 | Gear, differential ring | 1.55 | 1 | |
| 90201-35508 | Gear, differential ring | 1.55 | 1 | |
| 90201-35509 | Gear, differential ring | 1.55 | 1 | |
| 90201-35510 | Gear, differential ring | 1.55 | 1 | |
| 90201-35511 | Gear, differential ring | 1.55 | 1 | |
| 90201-35512 | Gear, differential ring | 1.55 | 1 | |
| 90201-35513 | Gear, differential ring | 1.55 | 1 | |
| 90201-35514 | Gear, differential ring | 1.55 | 1 | |
| 90201-35515 | Gear, differential ring | 1.04 | 1 | |
| 90201-35516 | Gear, differential ring | 1.04 | 1 | |
| 90201-35517 | Gear, differential ring | 1.04 | 1 | |
| 90201-35518 | Gear, differential ring | 1.04 | 1 | |
| SUPPORT, FRONT DIFFERENTIAL, NO.2 | ||||
| 52380-35040 | Support, front differential, no.2 | 61.25 | 1 | |
| 52380-35050 | Support, front differential, no.2 | 62.11 | 1 | |
| RING, SHAFT SNAP (FOR DIFFERENTIAL SIDE GEAR SHAFT RH) | ||||
|
90520-39023
|
Ring, shaft snap (for differential side gear shaft rh) | 1.90 | 1 | |
| 90520-75002 | Ring, shaft snap | 1.81 | 1 | |
| BOLT (FOR DIFFERENTIAL CLUTCH CASE SETTING) | ||||
|
90107-12001
|
Bolt (for differential clutch case setting) | 3.74 | 2 | |
|
90109-12029
|
Bolt (for differential clutch case setting) | 1.55 | 4 | |
| ACTUATOR ASSY, DIFFERENTIAL VACUUM | ||||
| 41400-34011 | Actuator assy, differential vacuum | 205.53 | 1 | |
| 41400-35020 | Actuator assy, differential vacuum | 100.07 | 1 | |
| Subschemes | ||||
| FRONT DRIVE SHAFT | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRG
SSRX
Drive
4WD
Transmission
AT
Fuel
Diesel
Engine
1KZ-TE
Volume
3.00
Frame
KH-KZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 41039-34050 | Gear kit, differential | 110.42 | 1 | |
| 41101-35131 | Carrier sub-assy, differential, front | 351.11 | 1 | |
| 41110-3D140 | Carrier assy, differential, front | 1,820.25 | 1 | |
| 41201-80067 | Final gear kit, differential, front | 324.37 | 1 | |
| 41204-35070 | Flange sub-assy, front drive pinion companion, front | Discontinued | 1 | |
| 41214-35020 | Slinger, front differential drive pinion oil; Slinger, rear differential drive pinion oil | 3.28 | 1 | |
|
41222-35030
|
Plate, fornt differential ring gear set bolt lock; Plate, front axle differential ring gear set bolt lock; Plate, rear differential ring gear set bolt lock | 1.04 | 5 | |
|
41231-22010
|
Spacer, front axle differential drive pinion bearing; Spacer, front differential drive pinion bearing; Spacer, rear differential drive pinion bearing | 4.89 | 1 | |
| 41252-35030 | Deflector, dust (for front differential) | 3.88 | 1 | |
| 41306-35030 | Shaft sub-assy, differential side gear inter | 81.09 | 1 | |
| 41311-35060 | Case, front differential | 194.96 | 1 | |
| 41320-35040 | Tube assy, front differential | 106.11 | 1 | |
| 41331-35070 | Gear, front differential side | 110.42 | 2 | |
| 41337-35020 | Shaft sub-assy, differential side gear, rh | 75.05 | 1 | |
| 41341-30020 | Pinion, front axle differential; Pinion, front differential; Pinion, rear differential | 24.42 | 2 | |
|
41351-30060
|
Washer, front axle differential pinion thrust; Washer, front differential pinion thrust; Washer, rear differential pinion thrust | 1.17 | 2 | |
| 41400-35020 | Actuator assy, differential vacuum | 100.07 | 1 | |
| 41433-35010 | Sleeve, differential clutch | 36.58 | 1 | |
| 41434-35020 | Hub, differential clutch | 15.70 | 1 | |
| 41435-35010 | Case, differential clutch | 42.96 | 1 | |
| 41436-35020 | Cover, front differential clutch case | Discontinued | 1 | |
| 41441-35010 | Fork, differential shift | 25.28 | 1 | |
| 41653-35030 | Stopper, differential mount, upper | 4.49 | 2 | |
| 41654-26010 | Stopper, differential mount, lower | 6.04 | 2 | |
| 41655-35010 | Nut, front differential mount, no.1 | Discontinued | 1 | |
| 41993-35010 | Label, differential oil information | 1.13 | 1 | |
|
52380-35010
|
Support assy, differential | 36.92 | 1 | |
| 90101-11353 | Bolt | 1.00 | 10 | |
| 90105-10391 | Bolt | 1.29 | 10 | |
| 90105-12272 | Bolt | 1.21 | - | |
| 90105-14090 | Bolt | 1.47 | - | |
| 90119-14057 | Bolt | 6.73 | - | |
| 90179-14063 | Nut | 1.00 | - | |
| 90179-18020 | Nut | 1.09 | 1 | |
| 90250-06058 | Pin | 1.32 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 90301-68003 | Ring, o (for front differential tube) | 3.02 | 1 | |
| 90311-38049 | Seal, oil (for front differential carrier) | 2.98 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
|
90341-18032
|
Plug | 1.81 | 1 | |
|
90341-24014
|
Plug | 2.68 | 1 | |
|
90364-33009
|
Bearing | 11.72 | 2 | |
| 90366-30022 | Bearing | 8.11 | 1 | |
|
90366-35023
|
Bearing | 10.50 | 1 | |
|
90368-50006
|
Bearing | 20.89 | 2 | |
| 90404-08004 | Union (for front differential) | 1.21 | 1 | |
|
90430-24003
|
Gasket | 1.00 | 1 | |
|
90521-29002
|
Ring, hole snap (for diff side gear intermeddiate shaft); Ring, hole snap (for differential side gear shaft); Ring, hole snap (for front drive shaft lh); Ring, shaft snap (for front drive inner shaft outer) | 1.00 | 1 | |
|
90903-63008
|
Bearing | 15.20 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
|
96152-00300
|
Ring | 1.00 | 1 | |
| WASHER, FRONT DIFFERENTIAL SIDE GEAR THRUST, NO.1 | ||||
| 41361-30040 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| 41361-30050 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30060 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30070 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| SHAFT, FRONT DIFFERENTIAL PINION, NO.1 | ||||
| 41342-22020 | Shaft, front axle differential pinion; Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| 41342-22021 | Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| WASHER, PLATE (FOR FRONT DIFFERENTIAL CASE) | ||||
| 90564-50092 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50093 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50094 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50095 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50096 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50097 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50098 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50099 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50100 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50101 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50102 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50103 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50104 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50105 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50106 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50107 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50108 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50109 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50110 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50111 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50112 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50113 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50114 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50115 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50116 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50117 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50118 | Washer, plate (for front differential case) | 4.06 | 2 | |
| GEAR, DIFFERENTIAL RING | ||||
|
90201-35497
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35498 | Gear, differential ring | 1.55 | 1 | |
| 90201-35499 | Gear, differential ring | 1.55 | 1 | |
|
90201-35500
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35501 | Gear, differential ring | 1.55 | 1 | |
| 90201-35502 | Gear, differential ring | 1.55 | 1 | |
| 90201-35503 | Gear, differential ring | 1.55 | 1 | |
| 90201-35504 | Gear, differential ring | 1.55 | 1 | |
| 90201-35505 | Gear, differential ring | 1.55 | 1 | |
| 90201-35506 | Gear, differential ring | 1.55 | 1 | |
| 90201-35507 | Gear, differential ring | 1.55 | 1 | |
| 90201-35508 | Gear, differential ring | 1.55 | 1 | |
| 90201-35509 | Gear, differential ring | 1.55 | 1 | |
| 90201-35510 | Gear, differential ring | 1.55 | 1 | |
| 90201-35511 | Gear, differential ring | 1.55 | 1 | |
| 90201-35512 | Gear, differential ring | 1.55 | 1 | |
| 90201-35513 | Gear, differential ring | 1.55 | 1 | |
| 90201-35514 | Gear, differential ring | 1.55 | 1 | |
| 90201-35515 | Gear, differential ring | 1.04 | 1 | |
| 90201-35516 | Gear, differential ring | 1.04 | 1 | |
| 90201-35517 | Gear, differential ring | 1.04 | 1 | |
| 90201-35518 | Gear, differential ring | 1.04 | 1 | |
| SUPPORT, FRONT DIFFERENTIAL, NO.2 | ||||
| 52380-35040 | Support, front differential, no.2 | 61.25 | 1 | |
| 52380-35050 | Support, front differential, no.2 | 62.11 | 1 | |
| RING, SHAFT SNAP (FOR DIFFERENTIAL SIDE GEAR SHAFT RH) | ||||
|
90520-39023
|
Ring, shaft snap (for differential side gear shaft rh) | 1.90 | 1 | |
| 90520-75002 | Ring, shaft snap | 1.81 | 1 | |
| 90521-86002 | Ring, shaft snap | 1.81 | 1 | |
| BOLT (FOR DIFFERENTIAL CLUTCH CASE SETTING) | ||||
|
90107-12001
|
Bolt (for differential clutch case setting) | 3.74 | 2 | |
|
90109-12029
|
Bolt (for differential clutch case setting) | 1.55 | 4 | |
| Subschemes | ||||
| FRONT DRIVE SHAFT | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRX
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1KZ-TE
Volume
3.00
Frame
KH-KZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 41039-34050 | Gear kit, differential | 110.42 | 1 | |
| 41101-35131 | Carrier sub-assy, differential, front | 351.11 | 1 | |
| 41110-3D140 | Carrier assy, differential, front | 1,820.25 | 1 | |
| 41201-80067 | Final gear kit, differential, front | 324.37 | 1 | |
| 41204-35070 | Flange sub-assy, front drive pinion companion, front | Discontinued | 1 | |
| 41214-35020 | Slinger, front differential drive pinion oil; Slinger, rear differential drive pinion oil | 3.28 | 1 | |
|
41222-35030
|
Plate, fornt differential ring gear set bolt lock; Plate, front axle differential ring gear set bolt lock; Plate, rear differential ring gear set bolt lock | 1.04 | 5 | |
|
41231-22010
|
Spacer, front axle differential drive pinion bearing; Spacer, front differential drive pinion bearing; Spacer, rear differential drive pinion bearing | 4.89 | 1 | |
| 41252-35030 | Deflector, dust (for front differential) | 3.88 | 1 | |
| 41306-35030 | Shaft sub-assy, differential side gear inter | 81.09 | 1 | |
| 41311-35060 | Case, front differential | 194.96 | 1 | |
| 41320-35040 | Tube assy, front differential | 106.11 | 1 | |
| 41331-35070 | Gear, front differential side | 110.42 | 2 | |
| 41337-35020 | Shaft sub-assy, differential side gear, rh | 75.05 | 1 | |
| 41341-30020 | Pinion, front axle differential; Pinion, front differential; Pinion, rear differential | 24.42 | 2 | |
|
41351-30060
|
Washer, front axle differential pinion thrust; Washer, front differential pinion thrust; Washer, rear differential pinion thrust | 1.17 | 2 | |
| 41400-35020 | Actuator assy, differential vacuum | 100.07 | 1 | |
| 41433-35010 | Sleeve, differential clutch | 36.58 | 1 | |
| 41434-35020 | Hub, differential clutch | 15.70 | 1 | |
| 41435-35010 | Case, differential clutch | 42.96 | 1 | |
| 41436-35020 | Cover, front differential clutch case | Discontinued | 1 | |
| 41441-35010 | Fork, differential shift | 25.28 | 1 | |
| 41653-35030 | Stopper, differential mount, upper | 4.49 | 2 | |
| 41654-26010 | Stopper, differential mount, lower | 6.04 | 2 | |
| 41655-35010 | Nut, front differential mount, no.1 | Discontinued | 1 | |
| 41993-35010 | Label, differential oil information | 1.13 | 1 | |
|
52380-35010
|
Support assy, differential | 36.92 | 1 | |
| 90101-11353 | Bolt | 1.00 | 10 | |
| 90105-10391 | Bolt | 1.29 | 10 | |
| 90105-12272 | Bolt | 1.21 | - | |
| 90105-14090 | Bolt | 1.47 | - | |
| 90119-14057 | Bolt | 6.73 | - | |
| 90179-14063 | Nut | 1.00 | - | |
| 90179-18020 | Nut | 1.09 | 1 | |
| 90250-06058 | Pin | 1.32 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 90301-68003 | Ring, o (for front differential tube) | 3.02 | 1 | |
| 90311-38049 | Seal, oil (for front differential carrier) | 2.98 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
|
90341-18032
|
Plug | 1.81 | 1 | |
|
90341-24014
|
Plug | 2.68 | 1 | |
|
90364-33009
|
Bearing | 11.72 | 2 | |
| 90366-30022 | Bearing | 8.11 | 1 | |
|
90366-35023
|
Bearing | 10.50 | 1 | |
|
90368-50006
|
Bearing | 20.89 | 2 | |
| 90404-08004 | Union (for front differential) | 1.21 | 1 | |
|
90430-24003
|
Gasket | 1.00 | 1 | |
|
90521-29002
|
Ring, hole snap (for diff side gear intermeddiate shaft); Ring, hole snap (for differential side gear shaft); Ring, hole snap (for front drive shaft lh); Ring, shaft snap (for front drive inner shaft outer) | 1.00 | 1 | |
|
90903-63008
|
Bearing | 15.20 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
|
96152-00300
|
Ring | 1.00 | 1 | |
| WASHER, FRONT DIFFERENTIAL SIDE GEAR THRUST, NO.1 | ||||
| 41361-30040 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| 41361-30050 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30060 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30070 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| SHAFT, FRONT DIFFERENTIAL PINION, NO.1 | ||||
| 41342-22020 | Shaft, front axle differential pinion; Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| 41342-22021 | Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| WASHER, PLATE (FOR FRONT DIFFERENTIAL CASE) | ||||
| 90564-50092 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50093 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50094 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50095 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50096 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50097 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50098 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50099 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50100 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50101 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50102 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50103 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50104 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50105 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50106 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50107 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50108 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50109 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50110 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50111 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50112 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50113 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50114 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50115 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50116 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50117 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50118 | Washer, plate (for front differential case) | 4.06 | 2 | |
| GEAR, DIFFERENTIAL RING | ||||
|
90201-35497
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35498 | Gear, differential ring | 1.55 | 1 | |
| 90201-35499 | Gear, differential ring | 1.55 | 1 | |
|
90201-35500
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35501 | Gear, differential ring | 1.55 | 1 | |
| 90201-35502 | Gear, differential ring | 1.55 | 1 | |
| 90201-35503 | Gear, differential ring | 1.55 | 1 | |
| 90201-35504 | Gear, differential ring | 1.55 | 1 | |
| 90201-35505 | Gear, differential ring | 1.55 | 1 | |
| 90201-35506 | Gear, differential ring | 1.55 | 1 | |
| 90201-35507 | Gear, differential ring | 1.55 | 1 | |
| 90201-35508 | Gear, differential ring | 1.55 | 1 | |
| 90201-35509 | Gear, differential ring | 1.55 | 1 | |
| 90201-35510 | Gear, differential ring | 1.55 | 1 | |
| 90201-35511 | Gear, differential ring | 1.55 | 1 | |
| 90201-35512 | Gear, differential ring | 1.55 | 1 | |
| 90201-35513 | Gear, differential ring | 1.55 | 1 | |
| 90201-35514 | Gear, differential ring | 1.55 | 1 | |
| 90201-35515 | Gear, differential ring | 1.04 | 1 | |
| 90201-35516 | Gear, differential ring | 1.04 | 1 | |
| 90201-35517 | Gear, differential ring | 1.04 | 1 | |
| 90201-35518 | Gear, differential ring | 1.04 | 1 | |
| SUPPORT, FRONT DIFFERENTIAL, NO.2 | ||||
| 52380-35040 | Support, front differential, no.2 | 61.25 | 1 | |
| 52380-35050 | Support, front differential, no.2 | 62.11 | 1 | |
| RING, SHAFT SNAP (FOR DIFFERENTIAL SIDE GEAR SHAFT RH) | ||||
|
90520-39023
|
Ring, shaft snap (for differential side gear shaft rh) | 1.90 | 1 | |
| 90520-75002 | Ring, shaft snap | 1.81 | 1 | |
| BOLT (FOR DIFFERENTIAL CLUTCH CASE SETTING) | ||||
|
90107-12001
|
Bolt (for differential clutch case setting) | 3.74 | 2 | |
|
90109-12029
|
Bolt (for differential clutch case setting) | 1.55 | 4 | |
| Subschemes | ||||
| FRONT DRIVE SHAFT | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRG
SSRX
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
5VZ-FE
Volume
3.40
Frame
GF-VZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
|
12157-10010
|
Gasket (for center power take-off case) | 1.00 | 1 | |
| 41039-34050 | Gear kit, differential | 110.42 | 1 | |
| 41101-35131 | Carrier sub-assy, differential, front | 351.11 | 1 | |
| 41201-80085 | Final gear kit, differential, front | Discontinued | 1 | |
| 41204-35060 | Flange sub-assy, front drive pinion companion, front | 46.58 | 1 | |
| 41214-35020 | Slinger, front differential drive pinion oil; Slinger, rear differential drive pinion oil | 3.28 | 1 | |
|
41222-35030
|
Plate, fornt differential ring gear set bolt lock; Plate, front axle differential ring gear set bolt lock; Plate, rear differential ring gear set bolt lock | 1.04 | 5 | |
|
41231-22010
|
Spacer, front axle differential drive pinion bearing; Spacer, front differential drive pinion bearing; Spacer, rear differential drive pinion bearing | 4.89 | 1 | |
| 41252-35030 | Deflector, dust (for front differential) | 3.88 | 1 | |
| 41306-35030 | Shaft sub-assy, differential side gear inter | 81.09 | 1 | |
| 41311-35060 | Case, front differential | 194.96 | 1 | |
| 41320-35040 | Tube assy, front differential | 106.11 | 1 | |
| 41331-35070 | Gear, front differential side | 110.42 | 2 | |
| 41337-35020 | Shaft sub-assy, differential side gear, rh | 75.05 | 1 | |
| 41341-30020 | Pinion, front axle differential; Pinion, front differential; Pinion, rear differential | 24.42 | 2 | |
|
41351-30060
|
Washer, front axle differential pinion thrust; Washer, front differential pinion thrust; Washer, rear differential pinion thrust | 1.17 | 2 | |
| 41433-35010 | Sleeve, differential clutch | 36.58 | 1 | |
| 41434-35020 | Hub, differential clutch | 15.70 | 1 | |
| 41435-35010 | Case, differential clutch | 42.96 | 1 | |
| 41436-35020 | Cover, front differential clutch case | Discontinued | 1 | |
| 41441-35010 | Fork, differential shift | 25.28 | 1 | |
| 41653-35030 | Stopper, differential mount, upper | 4.49 | 2 | |
| 41654-26010 | Stopper, differential mount, lower | 6.04 | 2 | |
| 41655-35010 | Nut, front differential mount, no.1 | Discontinued | 1 | |
| 41993-35010 | Label, differential oil information | 1.13 | 1 | |
|
52380-35010
|
Support assy, differential | 36.92 | 1 | |
| 90101-11353 | Bolt | 1.00 | 10 | |
| 90105-10391 | Bolt | 1.29 | 10 | |
| 90105-12272 | Bolt | 1.21 | - | |
| 90105-14090 | Bolt | 1.47 | - | |
| 90119-14057 | Bolt | 6.73 | - | |
| 90179-14063 | Nut | 1.00 | - | |
| 90179-18020 | Nut | 1.09 | 1 | |
| 90250-06058 | Pin | 1.32 | 1 | |
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90254-05016 | Pin | 1.21 | 1 | |
| 90301-68003 | Ring, o (for front differential tube) | 3.02 | 1 | |
| 90311-38049 | Seal, oil (for front differential carrier) | 2.98 | 1 | |
| 90341-10065 | Gasket, reverse restrict pin | 1.90 | 1 | |
|
90341-18032
|
Plug | 1.81 | 1 | |
|
90341-24014
|
Plug | 2.68 | 1 | |
|
90364-33009
|
Bearing | 11.72 | 2 | |
| 90366-30022 | Bearing | 8.11 | 1 | |
|
90366-35023
|
Bearing | 10.50 | 1 | |
|
90368-50006
|
Bearing | 20.89 | 2 | |
| 90404-08004 | Union (for front differential) | 1.21 | 1 | |
|
90430-24003
|
Gasket | 1.00 | 1 | |
|
90521-29002
|
Ring, hole snap (for diff side gear intermeddiate shaft); Ring, hole snap (for differential side gear shaft); Ring, hole snap (for front drive shaft lh); Ring, shaft snap (for front drive inner shaft outer) | 1.00 | 1 | |
|
90903-63008
|
Bearing | 15.20 | 1 | |
| 91511-60820 | Bolt | 1.00 | - | |
|
96152-00300
|
Ring | 1.00 | 1 | |
| WASHER, FRONT DIFFERENTIAL SIDE GEAR THRUST, NO.1 | ||||
| 41361-30040 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| 41361-30050 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30060 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 1.90 | 2 | |
| 41361-30070 | Washer, front axle differential side gear thrust; Washer, front differential side gear thrust, no.1; Washer, rear differential side gear thrust no.1 | 2.07 | 2 | |
| SHAFT, FRONT DIFFERENTIAL PINION, NO.1 | ||||
| 41342-22020 | Shaft, front axle differential pinion; Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| 41342-22021 | Shaft, front differential pinion, no.1; Shaft, rear differential pinion | 6.82 | 1 | |
| WASHER, PLATE (FOR FRONT DIFFERENTIAL CASE) | ||||
| 90564-50092 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50093 | Washer, plate (for front differential case) | 3.54 | 2 | |
| 90564-50094 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50095 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50096 | Washer, plate (for front differential case) | 3.62 | 2 | |
| 90564-50097 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50098 | Washer, plate (for front differential case) | 3.80 | 2 | |
| 90564-50099 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50100 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50101 | Washer, plate (for front differential case) | 3.97 | 2 | |
| 90564-50102 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50103 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50104 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50105 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50106 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50107 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50108 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50109 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50110 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50111 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50112 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50113 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50114 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50115 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50116 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50117 | Washer, plate (for front differential case) | 4.06 | 2 | |
| 90564-50118 | Washer, plate (for front differential case) | 4.06 | 2 | |
| CARRIER ASSY, DIFFERENTIAL, FRONT | ||||
| 41110-34261 | Carrier assy, differential, front | 1,794.37 | 1 | |
| 41110-35801 | Carrier assy, differential, front | 1,820.25 | 1 | |
| GEAR, DIFFERENTIAL RING | ||||
|
90201-35497
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35498 | Gear, differential ring | 1.55 | 1 | |
| 90201-35499 | Gear, differential ring | 1.55 | 1 | |
|
90201-35500
|
Gear, differential ring | 1.55 | 1 | |
| 90201-35501 | Gear, differential ring | 1.55 | 1 | |
| 90201-35502 | Gear, differential ring | 1.55 | 1 | |
| 90201-35503 | Gear, differential ring | 1.55 | 1 | |
| 90201-35504 | Gear, differential ring | 1.55 | 1 | |
| 90201-35505 | Gear, differential ring | 1.55 | 1 | |
| 90201-35506 | Gear, differential ring | 1.55 | 1 | |
| 90201-35507 | Gear, differential ring | 1.55 | 1 | |
| 90201-35508 | Gear, differential ring | 1.55 | 1 | |
| 90201-35509 | Gear, differential ring | 1.55 | 1 | |
| 90201-35510 | Gear, differential ring | 1.55 | 1 | |
| 90201-35511 | Gear, differential ring | 1.55 | 1 | |
| 90201-35512 | Gear, differential ring | 1.55 | 1 | |
| 90201-35513 | Gear, differential ring | 1.55 | 1 | |
| 90201-35514 | Gear, differential ring | 1.55 | 1 | |
| 90201-35515 | Gear, differential ring | 1.04 | 1 | |
| 90201-35516 | Gear, differential ring | 1.04 | 1 | |
| 90201-35517 | Gear, differential ring | 1.04 | 1 | |
| 90201-35518 | Gear, differential ring | 1.04 | 1 | |
| SUPPORT, FRONT DIFFERENTIAL, NO.2 | ||||
| 52380-35040 | Support, front differential, no.2 | 61.25 | 1 | |
| 52380-35050 | Support, front differential, no.2 | 62.11 | 1 | |
| RING, SHAFT SNAP (FOR DIFFERENTIAL SIDE GEAR SHAFT RH) | ||||
|
90520-39023
|
Ring, shaft snap (for differential side gear shaft rh) | 1.90 | 1 | |
| 90520-75002 | Ring, shaft snap | 1.81 | 1 | |
| 90521-86002 | Ring, shaft snap | 1.81 | 1 | |
| BOLT (FOR DIFFERENTIAL CLUTCH CASE SETTING) | ||||
|
90107-12001
|
Bolt (for differential clutch case setting) | 3.74 | 2 | |
|
90109-12029
|
Bolt (for differential clutch case setting) | 1.55 | 4 | |
| ACTUATOR ASSY, DIFFERENTIAL VACUUM | ||||
| 41400-34011 | Actuator assy, differential vacuum | 205.53 | 1 | |
| 41400-35020 | Actuator assy, differential vacuum | 100.07 | 1 | |
| Subschemes | ||||
| FRONT DRIVE SHAFT | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSR
SSRG
SSRX
Drive
4WD
Transmission
AT
MT
Fuel
Gasoline
Engine
3RZ-FE
Volume
2.70
Frame
GF-RZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 41531-35021 | Tube, front differential vacuum | 14.32 | 1 | |
| 41541-35040 | Tank, differential vacuum | Discontinued | 1 | |
| 42599-35091 | Hose, vacuum disconnecting differential | Discontinued | 1 | |
| 90119-08413 | Bolt | 1.00 | - | |
| 90414-04001 | Joint, no.1 (for idle up divice) | 2.59 | - | |
| 90445-08322 | Hose, front differential vacuum, no.1 | 4.92 | - | |
| 90445-14174 | Hose, front differential vacuum, no.2; Tube, front differential lock actuator breather | 1.55 | - | |
| 90447-08029 | Hose, front differential vacuum, no.2 | 3.45 | - | |
| 90447-08030 | Hose, front differential vacuum | 4.83 | - | |
| 90447-08114 | - | 26.66 | - | |
| 90467-13001 | Clamp or clip (for radiator breather hose) | 1.04 | - | |
| 90917-10065 | Valve, check | 6.30 | 1 | |
|
90917-11022
|
Filter assy, gas | 8.11 | - | |
| 90930-03136 | Plug, breather (for front differential) | 2.22 | 1 | |
| 90949-01981 | - | Discontinued | - | |
| 90949-01982 | Clamp | 2.33 | - | |
| 90949-01996 | - | 2.33 | - | |
|
90999-92002
|
Hose | 2.61 | - | |
| 91631-60816 | Bolt | 1.04 | - | |
| Subschemes | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRG
SSRX
Drive
4WD
Transmission
AT
MT
Fuel
Diesel
Engine
1KZ-TE
Volume
3.00
Frame
KH-KZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 41531-35030 | Tube, front differential vacuum | 27.43 | 1 | |
| 42599-35081 | Hose, vacuum disconnecting differential | 23.90 | 1 | |
| 90413-04001 | Joint, no.1 (for idle up divice) | 2.42 | 1 | |
| 90445-14174 | Hose, front differential vacuum, no.2; Tube, front differential lock actuator breather | 1.55 | - | |
| 90445-14175 | Hose, front differential vacuum, no.1 | 6.21 | - | |
| 90447-08029 | Hose, front differential vacuum, no.2 | 3.45 | - | |
| 90447-08030 | Hose, front differential vacuum | 4.83 | - | |
| 90467-13001 | Clamp or clip (for radiator breather hose) | 1.04 | - | |
| 90469-14002 | Fastener | 1.38 | - | |
| 90930-03136 | Plug, breather (for front differential) | 2.22 | 1 | |
| 90949-01A22 | - | 2.33 | - | |
|
90999-92002
|
Hose | 2.61 | - | |
| 91631-60816 | Bolt | 1.04 | - | |
| Subschemes | ||||
| SWITCH & RELAY & COMPUTER | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
SSRG
SSRX
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
5VZ-FE
Volume
3.40
Frame
GF-VZN185W
Produсtion years
1998
1999
2000
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 41531-35021 | Tube, front differential vacuum | 14.32 | 1 | |
| 41541-35040 | Tank, differential vacuum | Discontinued | 1 | |
| 42599-35091 | Hose, vacuum disconnecting differential | Discontinued | 1 | |
| 90119-08413 | Bolt | 1.00 | - | |
| 90413-04001 | Joint, no.1 (for idle up divice) | 2.42 | - | |
| 90414-04001 | Joint, no.1 (for idle up divice) | 2.59 | - | |
| 90445-08322 | Hose, front differential vacuum, no.1 | 4.92 | - | |
| 90445-14174 | Hose, front differential vacuum, no.2; Tube, front differential lock actuator breather | 1.55 | - | |
| 90447-08029 | Hose, front differential vacuum, no.2 | 3.45 | - | |
| 90447-08030 | Hose, front differential vacuum | 4.83 | - | |
| 90447-08041 | Hose, front differential vacuum, no.3 | 7.51 | - | |
| 90447-08114 | - | 26.66 | - | |
| 90447-08120 | - | 45.72 | - | |
| 90464-00594 | - | 1.04 | - | |
| 90464-00739 | - | 1.00 | - | |
| 90467-13001 | Clamp or clip (for radiator breather hose) | 1.04 | - | |
| 90917-10065 | Valve, check | 6.30 | 1 | |
| 90930-03136 | Plug, breather (for front differential) | 2.22 | 1 | |
| 90949-01981 | - | Discontinued | - | |
| 90949-01982 | Clamp | 2.33 | - | |
| 90949-01996 | - | 2.33 | - | |
|
90999-92002
|
Hose | 2.61 | - | |
| 91631-60816 | Bolt | 1.04 | - | |
| Subschemes | ||||
| SWITCH & RELAY & COMPUTER | ||||