Crankshaft & piston for Toyota Land Cruiser 70, 8 generation 08.1987 - 07.2004
-
Body stylePickup
-
GradeSTD
-
TransmissionMT
-
Engine1PZ
-
Volume3.50
-
FrameS-PZJ70
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Pickup
Grade
STD
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1PZ
Volume
3.50
Frame
S-PZJ70
Produсtion years
1993
1994
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90105-12199 | - | Discontinued | - | |
| 90119-08200 | Bolt | 1.21 | - | |
| 90151-50011 | - | 1.00 | - | |
| 91111-71018 | - | 1.12 | - | |
| 91511-61050 | Bolt, flange (for idler) | Discontinued | - | |
| 96721-35042 | Gasket | 1.55 | - | |
| 13411-18010 | Crankshaft | 1,432.04 | 1 | |
| 13521-17010 | Gear or sprocket, crankshaft timing | 20.70 | 1 | |
| 13408-18010 | Pulley, crankshaft | 210.49 | 1 | |
|
90105-24001
|
Bolt (for crankshaft pulley set) | 4.74 | 1 | |
| 13201-17010 | Rod sub-assy, connecting | 109.56 | 5 | |
|
13265-17010
|
Bolt, connecting rod | 2.95 | 10 | |
| 90521-32004 | Ring, hole snap (for piston pin) | 1.00 | 10 | |
| 11011-17010 | Washer set, crankshaft thrust | 3.55 | 1 | |
| 95161-30516 | Key | 1.00 | 1 | |
| 90999-73126 | Bush (for connecting rod small end) | 5.26 | 5 | |
| 13581-17010 | Shaft, idle gear, no.1 | 15.03 | 1 | |
| 88451-60050 | Pulley, crankshaft, no.2 | 36.06 | 1 | |
| 90201-27001 | Washer, plate (for crankshaft pulley set) | 5.26 | 1 | |
| 13525-17010 | Gear, idle, no.1 | 75.05 | 1 | |
| 13572-17010 | Plate, idle gear thrust | 5.73 | 1 | |
| 13522-17010 | Gear, pump drive shaft | 21.31 | 1 | |
| 90250-08030 | Pin | 1.55 | 1 | |
| BEARING, CONNECTING ROD | ||||
| 13041-17010-02 | Bearing, connecting rod | 9.46 | 5 | |
| 13041-17010-03 | Bearing, connecting rod | 9.44 | 5 | |
| 13041-17010-04 | Bearing, connecting rod | 9.44 | 5 | |
| 13041-17010-05 | Bearing, connecting rod | 9.43 | 5 | |
| 13041-17010-06 | Bearing, connecting rod | 14.62 | 5 | |
| RING SET, PISTON | ||||
| 13011-18011 | Ring set, piston | 167.36 | 1 | |
| 13013-18011 | Ring set, piston | Discontinued | 1 | |
| BEARING SET, CRANKSHAFT | ||||
| 11704-18010 | Bearing set, crankshaft | 225.16 | 1 | |
| 11705-18010 | Bearing set, crankshaft | 225.16 | 1 | |
| BEARING, CRANKSHAFT | ||||
| 11701-17010-02 | Bearing, crankshaft | 19.63 | 6 | |
| 11701-17010-03 | Bearing, crankshaft | 12.55 | 6 | |
| 11701-17010-04 | Bearing, crankshaft | 12.58 | 6 | |
| 11701-17010-05 | Bearing, crankshaft | 15.63 | 6 | |
| 11701-17010-06 | Bearing, crankshaft | 12.53 | 6 | |
| PISTON SUB-ASSY, W/PIN | ||||
| 13101-17010-01 | Piston sub-assy, w/pin | 78.21 | 5 | |
| 13101-17010-02 | Piston sub-assy, w/pin | 77.30 | 5 | |
|
13101-17010-03
|
Piston sub-assy, w/pin | 103.52 | 5 | |
| 13103-17010 | Piston sub-assy, w/pin | 119.05 | 5 | |
| BEARING SET, CONNECTING ROD | ||||
| 13204-18040 | Bearing set, connecting rod | 123.36 | 1 | |
| 13205-18040 | Bearing set, connecting rod | 123.36 | 1 | |
| FLYWHEEL SUB-ASSY | ||||
| 13450-18010 | Flywheel sub-assy | 992.08 | 1 | |
| 13450-18011 | Flywheel sub-assy | 992.08 | 1 | |
