Crankshaft & piston for Toyota Land Cruiser 70, 8 generation 08.1987 - 07.2004
-
Body stylePickup
-
GradeLX
-
TransmissionMT
-
Engine1HZ
-
Volume4.20
-
FrameKG-HZJ71
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Pickup
Grade
LX
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1HZ
Volume
4.20
Frame
KG-HZJ71
Produсtion years
1999
2000
2001
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11011-17010 | Washer set, crankshaft thrust | 3.55 | 1 | |
| 13201-17010 | Rod sub-assy, connecting | 109.56 | 6 | |
| 13204-17011 | Bearing set, connecting rod | 14.62 | 1 | |
|
13265-17010
|
Bolt, connecting rod | 2.95 | 12 | |
| 13405-17010 | Flywheel sub-assy | 285.55 | 1 | |
| 13407-17010 | Pulley, crankshaft, no.2 | 109.56 | 1 | |
| 13408-17010 | Pulley, crankshaft | 132.85 | 1 | |
| 13453-17010 | Gear, flywheel ring | 56.94 | 1 | |
| 13521-17010 | Gear or sprocket, crankshaft timing | 20.70 | 1 | |
| 13522-17010 | Gear, pump drive shaft | 21.31 | 1 | |
| 13525-17010 | Gear, idle, no.1 | 75.05 | 1 | |
| 13572-17021 | Plate, idle gear thrust | 5.73 | 1 | |
| 90105-08154 | Bolt, no.1(for alternator) | 1.00 | - | |
| 90105-10347 | Bolt | 1.00 | - | |
| 90105-12169 | Bolt, flywheel setting | 1.16 | 8 | |
|
90105-24001
|
Bolt (for crankshaft pulley set) | 4.74 | 1 | |
| 90201-27001 | Washer, plate (for crankshaft pulley set) | 5.26 | 1 | |
| 90250-10192 | Pin, straight | 1.00 | 3 | |
| 90521-32004 | Ring, hole snap (for piston pin) | 1.00 | 12 | |
| 90999-73126 | Bush (for connecting rod small end) | 5.26 | 6 | |
| 95161-30516 | Key | 1.00 | 1 | |
| 96721-35042 | Gasket | 1.55 | - | |
| CRANKSHAFT | ||||
| 13411-17011 | Crankshaft | 1,238.46 | 1 | |
| 13411-17012 | Crankshaft | 1,086.97 | 1 | |
| BEARING, CONNECTING ROD | ||||
| 13041-17011-02 | Bearing, connecting rod | 9.46 | 6 | |
| 13041-17011-03 | Bearing, connecting rod | 9.44 | 6 | |
| 13041-17011-04 | Bearing, connecting rod | 9.44 | 6 | |
| 13041-17011-05 | Bearing, connecting rod | 9.43 | 6 | |
| 13041-17011-06 | Bearing, connecting rod | 13.03 | 6 | |
| RING SET, PISTON | ||||
| 13011-17030 | Ring set, piston | 163.05 | 1 | |
|
13013-17030
|
Ring set, piston | 166.50 | 1 | |
| 13014-17010 | Ring set, piston | 286.41 | 1 | |
| BEARING SET, CRANKSHAFT | ||||
| 11704-17011 | Bearing set, crankshaft | 19.63 | 1 | |
| 11705-17011 | Bearing set, crankshaft | 106.67 | 1 | |
| BEARING, CRANKSHAFT | ||||
| 11701-17011-02 | Bearing, crankshaft | 12.74 | 7 | |
| 11701-17011-03 | Bearing, crankshaft | 12.55 | 7 | |
| 11701-17011-04 | Bearing, crankshaft | 12.58 | 7 | |
| 11701-17011-05 | Bearing, crankshaft | 12.54 | 7 | |
| 11701-17011-06 | Bearing, crankshaft | 12.53 | 7 | |
| 11701-17011-07 | Bearing, crankshaft | 19.63 | 7 | |
| PISTON SUB-ASSY, W/PIN | ||||
| 13101-17100-01 | Piston sub-assy, w/pin | 63.16 | 6 | |
|
13101-17100-02
|
Piston sub-assy, w/pin | 63.41 | 6 | |
| 13101-17100-03 | Piston sub-assy, w/pin | 64.70 | 6 | |
| 13103-17100 | Piston sub-assy, w/pin | 74.43 | 6 | |
| 13104-17010 | Piston sub-assy, w/pin | 81.95 | 6 | |
| SHAFT, IDLE GEAR, NO.1 | ||||
| 13581-17011 | Shaft, idle gear, no.1 | 15.03 | 1 | |
| 13581-17012 | Shaft, idle gear, no.1 | 15.03 | 1 | |
