Cylinder block for Toyota Land Cruiser 70, 8 generation 08.1987 - 07.2004
-
Body style
-
Grade
-
TransmissionMT
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Pickup
Grade
STD
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
3B
Volume
3.40
Frame
S-BJ70
Produсtion years
1988
1989
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11452-56050 | Guide, oil level gage | 15.70 | 1 | |
| 11459-56040 | Support, oil level gage guide | 7.17 | 1 | |
| 12129-56010 | - | 16.70 | - | |
| 12581-58020 | Insulator, cylinder block, no.1 | 42.87 | 1 | |
| 15708-58020 | Nozzle sub-assy, oil, no.1 | 12.01 | 4 | |
| 90109-06147 | Bolt | 1.00 | - | |
| 90109-10122 | Bolt | 1.55 | - | |
| 90116-08194 | Bolt, double sided | 1.00 | - | |
| 90119-08505 | Bolt | 1.00 | - | |
| 90179-08088 | - | 1.00 | - | |
| 90250-08120 | Pin, straight | 1.00 | 4 | |
|
90253-15005
|
Pin | 1.16 | 2 | |
| 90341-18089 | Plug (for oil pan drain) | 1.55 | 1 | |
|
90345-52001
|
Cock sub-assy, water drain (for cylinder block) | 1.98 | 1 | |
| 90430-06004 | Washer | 1.00 | - | |
|
90430-10035
|
Gasket | 1.00 | - | |
|
90430-18012
|
Gasket | 1.21 | - | |
|
90430-27001
|
Gasket, engine oil level sensor | 1.00 | - | |
| 90915-01015 | Nozzle, oil | 4.49 | 1 | |
| 93385-16014 | Bolt | 1.00 | - | |
| 94110-40800 | Nut | 1.00 | - | |
| 96411-43000 | Plug | 1.73 | 4 | |
| 96721-24010 | Ring, o | 1.00 | - | |
|
96431-53828
|
Cock sub-assy, water drain (for cylinder block) | 5.52 | 1 | |
| 96432-23814 | Plug, radiator drain cock; Plug, water drain cock (for cylinder block); Plug, water drain cock(for water by-pass joint) | 5.09 | 1 | |
|
96411-43500
|
Plug | 2.07 | 4 | |
| 96411-41400 | Plug | 1.04 | 2 | |
| BLOCK SUB-ASSY, CYLINDER | ||||
| 11401-59305 | Block sub-assy, cylinder | 2,812.32 | 1 | |
| 11401-59415 | Block sub-assy, cylinder | 2,657.04 | 1 | |
| PAN SUB-ASSY, OIL | ||||
| 12101-56070 | Pan sub-assy, oil | Discontinued | 1 | |
| 12101-56090 | Pan sub-assy, oil | Discontinued | 1 | |
| GAGE SUB-ASSY, OIL LEVEL | ||||
| 15301-56040 | Gage sub-assy, oil level | 9.66 | 1 | |
| 15301-56050 | Gage sub-assy, oil level | 9.66 | 1 | |
| 15301-56060 | Gage sub-assy, oil level | 9.66 | 1 | |
| GASKET(FOR OIL PAN DRAIN PLUG) | ||||
| 90430-18018 | Gasket (for oil pan drain plug) | 1.00 | 1 | |
| 90430-18244 | Gasket | 1.00 | 1 | |
| BOLT(FOR CRANKSHAFT BEARING CAP SET) | ||||
| 90109-16001 | Bolt (for crankshaft bearing cap set) | Discontinued | 10 | |
| 90910-02082 | Bolt (for crankshaft bearing cap set) | 3.28 | 5 | |
| 90910-02083 | Bolt (for crankshaft bearing cap set) | 3.80 | 5 | |
| PLUG, W/HEAD TAPER SCREW, NO.2 | ||||
| 90345-53001 | Plug | Discontinued | 1 | |
| 90345-53004 | Plug, w/head taper screw, no.2 | 1.64 | 1 | |
| PLUG, TIGHT, NO.2(FOR CYLINDER BLOCK) | ||||
|
96411-42800
|
Plug, tight | 1.99 | 4 | |
| 96411-45000 | Plug, tight | 2.42 | 5 | |
| PLUG, W/HEAD TAPER SCREW, NO.1 | ||||
| 90043-45027 | Plug, w/head taper screw, no.1 | 3.28 | 3 | |
| 90345-51007 | Plug, w/head taper screw, no.1 | 1.00 | 3 | |
| VALVE SUB-ASSY, OIL CHECK | ||||
| 15605-56010 | Valve sub-assy, oil check | 21.31 | 1 | |
| 15605-58010 | Valve sub-assy, oil check | Discontinued | 1 | |
| INSULATOR, OIL PAN | ||||
| 12156-58010 | Insulator, oil pan | 50.04 | 1 | |
| 12156-58030 | Insulator, oil pan | 50.90 | 1 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| CAMSHAFT & VALVE | ||||
Scheme fits to:
Steering wheel
Right
Body style
Pickup
SUV
Grade
STD
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1PZ
Volume
3.50
Frame
S-PZJ70
S-PZJ70V
S-PZJ77V
Produсtion years
1991
1992
1993
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90116-06130 | - | 1.47 | - | |
| 90119-06600 | Bolt | 1.21 | - | |
| 90179-06222 | Nut | 1.00 | - | |
| 90910-09087 | Plug | 1.82 | 1 | |
| 91511-B0812 | Bolt | 1.00 | - | |
| 96721-19010 | Ring, o | 1.16 | - | |
| 90250-08120 | Pin, straight | 1.00 | 2 | |
| 11401-19645 | Block sub-assy, cylinder | 2,467.25 | 1 | |
| 90250-08074 | Pin, straight | 1.00 | 2 | |
| 15708-17010 | Nozzle sub-assy, oil, no.1 | 8.97 | 5 | |
| 15301-17010 | Gage sub-assy, oil level | 10.44 | 1 | |
| 11452-18030 | Guide, oil level gage | Discontinued | 1 | |
| 90250-12006 | Pin, straight (for oil pan) | 1.21 | 2 | |
| 90250-06068 | Pin, straight | 1.00 | 2 | |
| 90331-35002 | Plug, tight | 1.64 | 3 | |
| 96411-41800 | Plug | 1.00 | 4 | |
| 96411-42500 | Plug | 2.07 | 1 | |
| 11448-17010 | Orifice, cylinder block oil | 1.24 | 1 | |
| 90250-08054 | Pin, straight | 1.00 | 2 | |
|
96411-43500
|
Plug | 2.07 | 4 | |
| 96411-45000 | Plug, tight | 2.42 | 2 | |
| 15605-54010 | Valve sub-assy, oil check | 5.78 | 5 | |
| 12581-17010 | Insulator, cylinder block, no.1 | 59.52 | 1 | |
|
12156-17010
|
Insulator, oil pan | 54.35 | 1 | |
| 11497-17010 | Gasket, cylinder block oil hole | 1.46 | 1 | |
| PAN SUB-ASSY, OIL | ||||
| 12101-18010 | Pan sub-assy, oil | Discontinued | 1 | |
| 12101-18030 | Pan sub-assy, oil | Discontinued | 1 | |
| GASKET(FOR OIL PAN DRAIN PLUG) | ||||
| 90430-12027 | Gasket | 1.00 | 1 | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| BOLT(FOR CRANKSHAFT BEARING CAP SET) | ||||
| 90119-08182 | Bolt (for crankshaft bearing cap set) | 1.21 | 13 | |
| 90910-02098 | Bolt (for crankshaft bearing cap set) | 2.07 | 12 | |
| COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK) | ||||
| 90345-52003 | Cock sub-assy, water drain (for cylinder block) | 1.81 | 1 | |
| 90910-09088 | Cock sub-assy, water drain (for cylinder block) | 5.35 | 1 | |
| PLUG(FOR OIL PAN DRAIN) | ||||
|
90341-12012
|
Plug | 1.38 | 1 | |
| 90341-12026 | Plug | 2.89 | 1 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| RADIATOR & WATER OUTLET | ||||
Scheme fits to:
Steering wheel
Right
Body style
Pickup
Grade
STD
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1PZ
Volume
3.50
Frame
S-PZJ70
Produсtion years
1993
1994
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90116-06130 | - | 1.47 | - | |
| 90119-06600 | Bolt | 1.21 | - | |
| 90179-06222 | Nut | 1.00 | - | |
| 91511-B0812 | Bolt | 1.00 | - | |
| 96721-19010 | Ring, o | 1.16 | - | |
| 90250-08120 | Pin, straight | 1.00 | 2 | |
| 11401-19645 | Block sub-assy, cylinder | 2,467.25 | 1 | |
| 90250-08074 | Pin, straight | 1.00 | 2 | |
| 15708-17010 | Nozzle sub-assy, oil, no.1 | 8.97 | 5 | |
| 12101-18030 | Pan sub-assy, oil | Discontinued | 1 | |
| 15301-17010 | Gage sub-assy, oil level | 10.44 | 1 | |
| 11452-18030 | Guide, oil level gage | Discontinued | 1 | |
| 90345-52003 | Cock sub-assy, water drain (for cylinder block) | 1.81 | 1 | |
| 90250-12006 | Pin, straight (for oil pan) | 1.21 | 2 | |
| 90250-06068 | Pin, straight | 1.00 | 2 | |
| 90331-35002 | Plug, tight | 1.64 | 3 | |
| 96411-41800 | Plug | 1.00 | 4 | |
| 96411-42500 | Plug | 2.07 | 1 | |
| 11448-17010 | Orifice, cylinder block oil | 1.24 | 1 | |
| 90250-08054 | Pin, straight | 1.00 | 2 | |
|
96411-43500
|
Plug | 2.07 | 4 | |
| 96411-45000 | Plug, tight | 2.42 | 2 | |
| 15605-54010 | Valve sub-assy, oil check | 5.78 | 5 | |
| 12581-17010 | Insulator, cylinder block, no.1 | 59.52 | 1 | |
|
12156-17010
|
Insulator, oil pan | 54.35 | 1 | |
| 11497-17010 | Gasket, cylinder block oil hole | 1.46 | 1 | |
| GASKET(FOR OIL PAN DRAIN PLUG) | ||||
| 90430-12027 | Gasket | 1.00 | 1 | |
|
90430-12031
|
Gasket | 1.00 | 1 | |
| BOLT(FOR CRANKSHAFT BEARING CAP SET) | ||||
| 90119-08182 | Bolt (for crankshaft bearing cap set) | 1.21 | 13 | |
| 90910-02098 | Bolt (for crankshaft bearing cap set) | 2.07 | 12 | |
| PLUG(FOR OIL PAN DRAIN) | ||||
|
90341-12012
|
Plug | 1.38 | 1 | |
| 90341-12026 | Plug | 2.89 | 1 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| RADIATOR & WATER OUTLET | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
STD
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1PZ
Volume
3.50
Frame
S-PZJ70
S-PZJ70V
S-PZJ77V
Produсtion years
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11401-19645 | Block sub-assy, cylinder | 2,467.25 | 1 | |
| 11448-17010 | Orifice, cylinder block oil | 1.24 | 1 | |
| 11452-18030 | Guide, oil level gage | Discontinued | 1 | |
| 11497-17010 | Gasket, cylinder block oil hole | 1.46 | 1 | |
|
12156-17010
|
Insulator, oil pan | 54.35 | 1 | |
| 12581-17010 | Insulator, cylinder block, no.1 | 59.52 | 1 | |
| 15301-17010 | Gage sub-assy, oil level | 10.44 | 1 | |
| 15605-54010 | Valve sub-assy, oil check | 5.78 | 5 | |
| 15708-17010 | Nozzle sub-assy, oil, no.1 | 8.97 | 5 | |
| 90116-06130 | - | 1.47 | - | |
| 90119-06600 | Bolt | 1.21 | - | |
| 90179-06222 | Nut | 1.00 | - | |
| 90250-06068 | Pin, straight | 1.00 | 2 | |
| 90250-08054 | Pin, straight | 1.00 | 2 | |
| 90250-08074 | Pin, straight | 1.00 | 2 | |
| 90250-08120 | Pin, straight | 1.00 | 2 | |
| 90250-12006 | Pin, straight (for oil pan) | 1.21 | 2 | |
| 90331-35002 | Plug, tight | 1.64 | 3 | |
|
90341-12012
|
Plug | 1.38 | 1 | |
| 90430-12027 | Gasket | 1.00 | 1 | |
| 90910-09087 | Plug | 1.82 | 1 | |
| 91511-B0812 | Bolt | 1.00 | - | |
| 96411-41800 | Plug | 1.00 | 4 | |
| 96411-42500 | Plug | 2.07 | 1 | |
|
96411-43500
|
Plug | 2.07 | 4 | |
| 96411-45000 | Plug, tight | 2.42 | 2 | |
| 96721-19010 | Ring, o | 1.16 | - | |
| PAN SUB-ASSY, OIL | ||||
| 12101-18010 | Pan sub-assy, oil | Discontinued | 1 | |
| 12101-18030 | Pan sub-assy, oil | Discontinued | 1 | |
| BOLT(FOR CRANKSHAFT BEARING CAP SET) | ||||
| 90119-08182 | Bolt (for crankshaft bearing cap set) | 1.21 | 13 | |
| 90910-02098 | Bolt (for crankshaft bearing cap set) | 2.07 | 12 | |
| COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK) | ||||
| 90345-52003 | Cock sub-assy, water drain (for cylinder block) | 1.81 | 1 | |
| 90910-09088 | Cock sub-assy, water drain (for cylinder block) | 5.35 | 1 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| RADIATOR & WATER OUTLET | ||||
Scheme fits to:
Steering wheel
Right
Body style
SUV
Grade
STD
Drive
4WD
Transmission
MT
Fuel
Diesel
Engine
1PZ
Volume
3.50
Frame
S-PZJ70
S-PZJ70V
U-PZJ77HV
Produсtion years
1990
1991
1992
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11401-19645 | Block sub-assy, cylinder | 2,467.25 | 1 | |
| 11448-17010 | Orifice, cylinder block oil | 1.24 | 1 | |
| 11452-18030 | Guide, oil level gage | Discontinued | 1 | |
| 11497-17010 | Gasket, cylinder block oil hole | 1.46 | 1 | |
| 12101-18010 | Pan sub-assy, oil | Discontinued | 1 | |
|
12156-17010
|
Insulator, oil pan | 54.35 | 1 | |
| 12581-17010 | Insulator, cylinder block, no.1 | 59.52 | 1 | |
| 15301-17010 | Gage sub-assy, oil level | 10.44 | 1 | |
| 15605-54010 | Valve sub-assy, oil check | 5.78 | 5 | |
| 15708-17010 | Nozzle sub-assy, oil, no.1 | 8.97 | 5 | |
| 90116-06130 | - | 1.47 | - | |
| 90119-06600 | Bolt | 1.21 | - | |
| 90179-06222 | Nut | 1.00 | - | |
| 90250-06068 | Pin, straight | 1.00 | 2 | |
| 90250-08054 | Pin, straight | 1.00 | 2 | |
| 90250-08074 | Pin, straight | 1.00 | 2 | |
| 90250-08120 | Pin, straight | 1.00 | 2 | |
| 90250-12006 | Pin, straight (for oil pan) | 1.21 | 2 | |
| 90331-35002 | Plug, tight | 1.64 | 3 | |
|
90341-12012
|
Plug | 1.38 | 1 | |
| 90430-12027 | Gasket | 1.00 | 1 | |
| 90910-09087 | Plug | 1.82 | 1 | |
| 90910-09088 | Cock sub-assy, water drain (for cylinder block) | 5.35 | 1 | |
| 91511-B0812 | Bolt | 1.00 | - | |
| 96411-41800 | Plug | 1.00 | 4 | |
| 96411-42500 | Plug | 2.07 | 1 | |
|
96411-43500
|
Plug | 2.07 | 4 | |
| 96411-45000 | Plug, tight | 2.42 | 2 | |
| 96721-19010 | Ring, o | 1.16 | - | |
| BOLT(FOR CRANKSHAFT BEARING CAP SET) | ||||
| 90119-08182 | Bolt (for crankshaft bearing cap set) | 1.21 | 13 | |
| 90910-02098 | Bolt (for crankshaft bearing cap set) | 2.07 | 12 | |
| Subschemes | ||||
| CRANKSHAFT & PISTON | ||||
| RADIATOR & WATER OUTLET | ||||