Number | Name | Price from, USD | Required |
---|
11361-28010 | Cover, flywheel housing under | 3.67 | 1 | |
11410-29245 | Block sub-assy, cylinder | 1,777.11 | 1 | |
11421-28031 | Crankcase assy, stiffening | 424.44 | 1 | |
12101-28050 | Pan sub-assy, oil | 88.00 | 1 | |
15678-28010 | Filter, oil control valve | 3.62 | 1 | |
90105-08056 | Bolt | 1.12 | - | |
90105-08439 | - | 1.47 | - | |
90119-06848 | Bolt | 1.00 | - | |
90126-06015 | Bolt, stud (for oil pan) | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | - | |
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.00 | 10 | |
90253-14003 | Pin | 1.15 | 2 | |
90311-89003 | Seal, engine rear oil | 3.94 | 1 | |
90341-12012 | Plug | 1.38 | 1 | |
90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-14011 | Gasket | 1.00 | 1 | |
90910-02124 | Bolt (for crankshaft bearing cap set) | 1.73 | 10 | |
90910-09087 | Plug | 1.82 | 1 | |
90910-09120 | Cock assy, drain(for oil filter bracket); Cock sub-assy, water drain (for cylinder block) | 5.26 | 1 | |
91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
91512-81032 | Bolt | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
91631-G0614 | Bolt, hood hinge | 1.00 | - | |
96721-19010 | Ring, o | 1.16 | 1 | |
96761-24020 | Gasket | 1.73 | - | |
GAGE SUB-ASSY, OIL LEVEL | ||||
15301-28020 | Gage sub-assy, oil level | 8.13 | 1 | |
15301-28051 | Gage sub-assy, oil level | 9.41 | 1 | |
GUIDE, OIL LEVEL GAGE | ||||
11452-28011 | Guide, oil level gage | 16.74 | 1 | |
11452-28040 | Guide, oil level gage | 14.84 | 1 | |
Subschemes | ||||
SWITCH & RELAY & COMPUTER |
Number | Name | Price from, USD | Required |
---|
11361-28010 | Cover, flywheel housing under | 3.67 | 1 | |
11410-29245 | Block sub-assy, cylinder | 1,777.11 | 1 | |
11421-28031 | Crankcase assy, stiffening | 424.44 | 1 | |
11452-28040 | Guide, oil level gage | 14.84 | 1 | |
12101-28050 | Pan sub-assy, oil | 88.00 | 1 | |
15301-28020 | Gage sub-assy, oil level | 8.13 | 1 | |
15678-28010 | Filter, oil control valve | 3.62 | 1 | |
90105-08056 | Bolt | 1.12 | - | |
90105-08439 | - | 1.47 | - | |
90119-06848 | Bolt | 1.00 | - | |
90126-06015 | Bolt, stud (for oil pan) | 1.00 | - | |
90179-06326 | Nut | 1.00 | - | |
90250-06003 | Pin, straight | 1.00 | - | |
90250-08074 | Pin, straight | 1.00 | 2 | |
90250-08120 | Pin, straight | 1.00 | 2 | |
90250-10113 | Pin, straight | 1.00 | 2 | |
90253-13017 | Pin | 1.00 | 10 | |
90253-14003 | Pin | 1.15 | 2 | |
90311-89003 | Seal, engine rear oil | 3.94 | 1 | |
90341-12012 | Plug | 1.38 | 1 | |
90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
90430-12031 | Gasket | 1.00 | 1 | |
90430-14011 | Gasket | 1.00 | 1 | |
90910-02124 | Bolt (for crankshaft bearing cap set) | 1.73 | 10 | |
90910-09087 | Plug | 1.82 | 1 | |
90910-09120 | Cock assy, drain(for oil filter bracket); Cock sub-assy, water drain (for cylinder block) | 5.26 | 1 | |
91512-61030 | Bolt (for transaxle case upper cover) | 1.47 | - | |
91512-81032 | Bolt | 1.00 | - | |
91551-G0845 | Bolt | 1.00 | - | |
91631-G0614 | Bolt, hood hinge | 1.00 | - | |
96721-19010 | Ring, o | 1.16 | 1 | |
96761-24020 | Gasket | 1.73 | - | |
Subschemes | ||||
SWITCH & RELAY & COMPUTER |