Cylinder head for Toyota Sienta NCP80, 1 generation, restyling 05.2006 - 06.2015
-
Grade
-
Drive
-
Transmission
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
G
X
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP81G
Produсtion years
2006
2007
2008
2009
2010
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90119-06903 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| 96742-19012 | Gasket | 1.12 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
|
11213-21020
|
Gasket, cylinder head cover | 8.72 | 1 | |
|
12180-21010
|
Cap sub-assy, oil filler | 8.26 | 1 | |
|
90430-37140
|
Gasket(for oil filler cap) | 1.00 | 1 | |
| 11101-21050 | Head sub-assy, cylinder | 966.20 | 1 | |
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 11115-21050 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21070 | Cover sub-assy, cylinder head | 143.20 | 1 | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 11212-21021 | Cover, cylinder head, no.2 | 46.58 | 1 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 90430-24246 | Gasket | 1.00 | 1 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-24013 | Plug, w/head straight screw, no.1; Plug, w/head straight screw, no.2; Plug, w/head taper screw, no.1 | 4.83 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 15794-21010 | Nozzle, cylinder head oil | 2.67 | 1 | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21020 | Seat, exhaust valve | 6.82 | 8 | |
| 11136-21020 | Seat, exhaust valve | 6.12 | 8 | |
| BOLT(FOR CYLINDER HEAD SET) | ||||
| 90910-02126 | Bolt (for cylinder head set) | 2.07 | 10 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
DICE
G
X
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP81G
Produсtion years
2011
2012
2013
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11201-21070 | Cover sub-assy, cylinder head | 143.20 | 1 | |
| 11212-21040 | Cover, cylinder head, no.2 | 46.58 | 1 | |
|
11213-21020
|
Gasket, cylinder head cover | 8.72 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 15794-21010 | Nozzle, cylinder head oil | 2.67 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90119-06903 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-24013 | Plug, w/head straight screw, no.1; Plug, w/head straight screw, no.2; Plug, w/head taper screw, no.1 | 4.83 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-24246 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| 96742-19012 | Gasket | 1.12 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| HEAD SUB-ASSY, CYLINDER | ||||
| 11101-21050 | Head sub-assy, cylinder | 966.20 | 1 | |
| 11101-21051 | Head sub-assy, cylinder | 799.70 | 1 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-21050 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21080 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21020 | Seat, exhaust valve | 6.82 | 8 | |
| 11136-21020 | Seat, exhaust valve | 6.12 | 8 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
DICE
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP81G
Produсtion years
2012
2013
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21051 | Head sub-assy, cylinder | 799.70 | 1 | |
| 11201-21070 | Cover sub-assy, cylinder head | 143.20 | 1 | |
| 11212-21040 | Cover, cylinder head, no.2 | 46.58 | 1 | |
|
11213-21020
|
Gasket, cylinder head cover | 8.72 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 15794-21010 | Nozzle, cylinder head oil | 2.67 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90119-06903 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-24013 | Plug, w/head straight screw, no.1; Plug, w/head straight screw, no.2; Plug, w/head taper screw, no.1 | 4.83 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-24246 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| 96742-19012 | Gasket | 1.12 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-21080 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21020 | Seat, exhaust valve | 6.82 | 8 | |
| 11136-21020 | Seat, exhaust valve | 6.12 | 8 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
DICE
G
X
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP81G
Produсtion years
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21051 | Head sub-assy, cylinder | 799.70 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21070 | Cover sub-assy, cylinder head | 143.20 | 1 | |
| 11212-21040 | Cover, cylinder head, no.2 | 46.58 | 1 | |
|
11213-21020
|
Gasket, cylinder head cover | 8.72 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 15794-21010 | Nozzle, cylinder head oil | 2.67 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90119-06903 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-24013 | Plug, w/head straight screw, no.1; Plug, w/head straight screw, no.2; Plug, w/head taper screw, no.1 | 4.83 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-24246 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| 96742-19012 | Gasket | 1.12 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21020 | Seat, exhaust valve | 6.82 | 8 | |
| 11136-21020 | Seat, exhaust valve | 6.12 | 8 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
CBA-NCP85G
Produсtion years
2006
2007
2008
2009
2010
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90116-06166 | Bolt | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91551-80660 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
|
11213-21011
|
Gasket, cylinder head cover | 8.89 | 1 | |
|
12180-21010
|
Cap sub-assy, oil filler | 8.26 | 1 | |
|
90430-37140
|
Gasket(for oil filler cap) | 1.00 | 1 | |
| 11101-21033 | Head sub-assy, cylinder | 897.18 | 1 | |
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 11115-21050 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21050 | Cover sub-assy, cylinder head | 190.65 | 1 | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 11212-21032 | Cover, cylinder head, no.2 | 54.35 | 1 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| 90430-20004 | Gasket | 1.00 | 1 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-20002 | Plug | 1.55 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21040 | Seat, exhaust valve | 6.45 | 8 | |
| 11136-21040 | Seat, exhaust valve | 6.12 | 8 | |
| BOLT(FOR CYLINDER HEAD SET) | ||||
| 90910-02126 | Bolt (for cylinder head set) | 2.07 | 10 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| WIRING & CLAMP | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
DICE
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP85G
Produсtion years
2011
2012
2013
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11212-21050 | Cover, cylinder head, no.2 | 53.49 | 1 | |
|
11213-21011
|
Gasket, cylinder head cover | 8.89 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90116-06166 | Bolt | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-20002 | Plug | 1.55 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-20004 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91551-80660 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| HEAD SUB-ASSY, CYLINDER | ||||
| 11101-21033 | Head sub-assy, cylinder | 897.18 | 1 | |
| 11101-21034 | Head sub-assy, cylinder | 747.08 | 1 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-21050 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21080 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21040 | Seat, exhaust valve | 6.45 | 8 | |
| 11136-21040 | Seat, exhaust valve | 6.12 | 8 | |
| COVER SUB-ASSY, CYLINDER HEAD | ||||
| 11201-21050 | Cover sub-assy, cylinder head | 190.65 | 1 | |
| 11201-21051 | Cover sub-assy, cylinder head | 158.73 | 1 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| WIRING & CLAMP | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
DICE
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP85G
Produсtion years
2012
2013
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21034 | Head sub-assy, cylinder | 747.08 | 1 | |
| 11212-21050 | Cover, cylinder head, no.2 | 53.49 | 1 | |
|
11213-21011
|
Gasket, cylinder head cover | 8.89 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90116-06166 | Bolt | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-20002 | Plug | 1.55 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-20004 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91551-80660 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-21080 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21040 | Seat, exhaust valve | 6.45 | 8 | |
| 11136-21040 | Seat, exhaust valve | 6.12 | 8 | |
| COVER SUB-ASSY, CYLINDER HEAD | ||||
| 11201-21050 | Cover sub-assy, cylinder head | 190.65 | 1 | |
| 11201-21051 | Cover sub-assy, cylinder head | 158.73 | 1 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| WIRING & CLAMP | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Van
Grade
DICE
G
X
Drive
4WD
Transmission
AT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NCP85G
Produсtion years
2013
2014
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21034 | Head sub-assy, cylinder | 747.08 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21051 | Cover sub-assy, cylinder head | 158.73 | 1 | |
| 11212-21050 | Cover, cylinder head, no.2 | 53.49 | 1 | |
|
11213-21011
|
Gasket, cylinder head cover | 8.89 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90116-06166 | Bolt | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-20002 | Plug | 1.55 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-20004 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91551-80660 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21040 | Seat, exhaust valve | 6.45 | 8 | |
| 11136-21040 | Seat, exhaust valve | 6.12 | 8 | |
| WASHER, SEAL(FOR CYLINDER HEAD COVER) | ||||
| 90210-05008 | Washer, seal(for cylinder head cover) | 1.00 | 2 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| WIRING & CLAMP | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||