Cylinder head for Toyota Yaris XP10, 1 generation 01.1999 - 02.2003
Scheme fits to:
Steering wheel
Left
Body style
Hatchback
Grade
SOL
Drive
FF
Transmission
MT
Fuel
Gasoline
Engine
1SZ-FE
Volume
1.00
Frame
SCP10
Produсtion years
1999
2000
2001
2002
2003
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-23030 | Head sub-assy, cylinder | 841.97 | 1 | |
| 11115-23030 | Gasket, cylinder head | 27.95 | 1 | |
| 11201-23070 | Cover sub-assy, cylinder head | 191.51 | 1 | |
| 11213-23020 | Gasket, cylinder head cover | 11.71 | 1 | |
| 11448-23010 | Orifice, cylinder head oil | 1.00 | 1 | |
|
12180-55010
|
Cap assy, oil filler; Cap sub-assy, oil filler | 5.44 | 1 | |
| 15301-23020 | Gage sub-assy, oil level | 10.35 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 16241-23010 | - | 3.36 | - | |
| 90116-06161 | Bolt, stud(for head to cylinder head cover) | 1.21 | - | |
| 90119-06884 | Bolt (for head to camshaft bearing cap) | 1.04 | 20 | |
|
90176-06028
|
Nut, cap (for cylinder head cover) | 1.00 | - | |
| 90201-10136 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| 90253-08004 | Pin, ring w/head | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
|
90430-37140
|
Gasket(for oil filler cap) | 1.00 | 1 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-80620 | Bolt | 1.00 | - | |
| 91621-60618 | - | 1.00 | - | |
| 91641-80820 | - | 1.00 | - | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-23020 | Hanger, engine, no.1 | 14.92 | 1 | |
| 12281-23021 | Hanger, engine, no.1 | 14.84 | 1 | |
| 12281-23040 | Hanger, engine, no.1 | 14.84 | 1 | |
| HANGER, ENGINE, NO.2 | ||||
| 12282-23010 | Hanger, engine, no.2 | 14.84 | 1 | |
| 12282-23030 | Hanger, engine, no.2 | 14.84 | 1 | |
| SEAT, INTAKE VALVE | ||||
| 11131-23010 | Seat, intake valve | 4.40 | 8 | |
| 11132-23010 | Seat, intake valve | 4.40 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-23020 | Seat, exhaust valve | 4.31 | 8 | |
| 11136-23020 | Seat, exhaust valve | 4.31 | 8 | |
| BOLT(FOR CYLINDER HEAD SET) | ||||
| 90910-02137 | Bolt (for cylinder head set) | 2.50 | 10 | |
| 90910-02143 | Bolt (for cylinder head set) | 2.53 | 10 | |
| Subschemes | ||||
| VENTILATION HOSE | ||||
