Cylinder head for Toyota Corolla Fielder E160, 3 generation 05.2012 - 03.2015
-
Grade
-
Drive
-
Transmission
-
Engine
-
Volume
-
Frame
-
Produсtion years
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
S
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
2ZR-FAE
Volume
1.80
Frame
DBA-ZRE162G
Produсtion years
2012
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-39675 | Head sub-assy, cylinder | 663.40 | 1 | |
| 11115-37060 | Gasket, cylinder head | 32.85 | 1 | |
| 11159-37010 | Gasket, camshaft bearing cap oil hole | 2.33 | 2 | |
| 11186-37010 | Gasket, camshaft housing rear cover | 4.05 | 1 | |
| 11193-37020 | Gasket, spark plug tube | 1.57 | 4 | |
| 11201-37050 | Cover sub-assy, cylinder head | 131.99 | 1 | |
| 11212-37140 | Cover, cylinder head, no.2 | 60.39 | 1 | |
| 11213-37030 | Gasket, cylinder head cover | 7.76 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
| 12551-37010 | Bracket, vacuum pump, no.1 | 20.19 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90109-06385 | Bolt, v-bank cover; Bracket, v-bank cover, no.1; Bracket, v-bank cover, no.2; Joint, engine cover | 1.00 | - | |
| 90250-06001 | Pin | 1.00 | 3 | |
| 90253-12002 | Pin | 1.00 | 2 | |
| 90341-20002 | Plug | 1.55 | 3 | |
| 90430-10024 | Gasket, camshaft bearing cap oil hole | 1.00 | - | |
| 90430-20004 | Gasket | 1.00 | 3 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90919-05060
|
Sensor, cam position; Sensor, cam position, lh; Sensor, cam position, rh; Sensor, camshaft position; Sensor, crank position, no.1; Sensor, crank position, no.2 | 35.63 | 2 | |
| 91551-80616 | Bolt | 1.00 | - | |
|
91551-80625
|
Bolt | 1.00 | - | |
| 91551-80670 | Bolt (for cylinder head cover) | 1.00 | 1 | |
| 91551-80825 | Bolt | 1.00 | - | |
| 91552-81050 | Bolt | 1.04 | - | |
| 91671-80616 | Bolt | 1.00 | - | |
|
96721-24015
|
Ring, o | 1.12 | - | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-31050 | Bush, intake valve guide | 4.74 | 8 | |
| 11123-31050 | Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11126-31030 | Bush, exhaust valve guide | 4.74 | 8 | |
| 11127-31030 | Bush, exhaust valve guide | 4.74 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-37021 | Hanger, engine, no.1 | 10.09 | - | |
| 12281-37050 | Hanger, engine, no.1 | 14.84 | - | |
| HANGER, ENGINE, NO.2 | ||||
| 12282-37011 | Hanger, engine, no.2 | 10.09 | - | |
| 12282-37040 | Hanger, engine, no.2 | 14.84 | - | |
| SEAT, INTAKE VALVE | ||||
| 11131-37020 | Seat, intake valve | 6.12 | 8 | |
| 11132-37020 | Seat, intake valve | 9.83 | 8 | |
| 11132-37040 | Seat, intake valve | 6.12 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-37020 | Seat, exhaust valve | 5.25 | 8 | |
| 11136-37020 | Seat, exhaust valve | 6.13 | 8 | |
| 11136-37040 | Seat, exhaust valve | 6.12 | 8 | |
| VALVE ASSY, CAMSHAFT TIMING OIL CONTROL | ||||
| 15330-37010 | Valve assy, camshaft timing oil control | 47.10 | 1 | |
| 15330-37020 | Valve assy, camshaft timing oil control | 49.29 | 1 | |
| WASHER, SEAL(FOR CYLINDER HEAD COVER) | ||||
| 16258-37010 | Gasket | 2.93 | 1 | |
|
90210-06013
|
Washer, seal | 1.00 | 1 | |
| HOUSING SUB-ASSY, CAMSHAFT | ||||
| 11107-37021 | Housing sub-assy, camshaft | 1,276.76 | 1 | |
| 11107-37022 | Housing sub-assy, camshaft | 1,276.76 | 1 | |
| CUSHION, CYLINDER HEAD COVER | ||||
| 90480-07008 | Cushion, cylinder head cover | 1.04 | 4 | |
| 90480-16049 | Cushion, cylinder head cover | 1.04 | 4 | |
| Subschemes | ||||
| CAMSHAFT & VALVE | ||||
| FUEL INJECTION SYSTEM | ||||
| WIRING & CLAMP | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
S
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
2ZR-FAE
Volume
1.80
Frame
DBA-ZRE162G
Produсtion years
2012
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90105-08455 | Bolt(for camshaft housing set) | 1.00 | - | |
| 90201-10344 | Washer, plate | 1.00 | 10 | |
| 90910-02166 | Bolt (for cylinder head set) | 2.07 | 10 | |
| 91671-G0835 | Bolt(for camshaft housing set) | 1.00 | - |
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
4WD
FF
Transmission
CVT
MT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NZE161G
DBA-NZE164G
Produсtion years
2012
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21051 | Head sub-assy, cylinder | 799.70 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21070 | Cover sub-assy, cylinder head | 143.20 | 1 | |
| 11212-21040 | Cover, cylinder head, no.2 | 46.58 | 1 | |
|
11213-21020
|
Gasket, cylinder head cover | 8.72 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 15794-21010 | Nozzle, cylinder head oil | 2.67 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90119-06903 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-24013 | Plug, w/head straight screw, no.1; Plug, w/head straight screw, no.2; Plug, w/head taper screw, no.1 | 4.83 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-24246 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| 96742-19012 | Gasket | 1.12 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21020 | Seat, exhaust valve | 6.82 | 8 | |
| 11136-21020 | Seat, exhaust valve | 6.12 | 8 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
X
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FE
Volume
1.50
Frame
DBA-NZE161G
Produсtion years
2012
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21090 | Head sub-assy, cylinder | 799.70 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21090 | Cover sub-assy, cylinder head | 143.20 | 1 | |
| 11212-21070 | Cover, cylinder head, no.2 | 49.17 | 1 | |
|
11213-21020
|
Gasket, cylinder head cover | 8.72 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
|
15330-21011
|
Valve assy, camshaft timing oil control | 49.09 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 15794-21010 | Nozzle, cylinder head oil | 2.67 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90119-06903 | Bolt (for cylinder head cover) | 1.00 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
|
90126-06012
|
Bolt, double sided | 1.00 | - | |
|
90176-06045
|
Nut | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-24013 | Plug, w/head straight screw, no.1; Plug, w/head straight screw, no.2; Plug, w/head taper screw, no.1 | 4.83 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-24246 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05060
|
Sensor, cam position; Sensor, cam position, lh; Sensor, cam position, rh; Sensor, camshaft position; Sensor, crank position, no.1; Sensor, crank position, no.2 | 35.63 | 1 | |
| 91511-C0622 | Bolt | 1.00 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| 96742-19012 | Gasket | 1.12 | - | |
|
G1917-32010
|
Gasket, rubber | 1.55 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| 11123-75020 | Bush, exhaust valve guide; Bush, intake valve guide | 4.74 | 8 | |
| HANGER, ENGINE, NO.1 | ||||
| 12281-21010 | Hanger, engine, no.1 | 20.10 | 2 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21060 | Seat, intake valve | 8.20 | 8 | |
| 11132-21060 | Seat, intake valve | 8.20 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21020 | Seat, exhaust valve | 6.82 | 8 | |
| 11136-21020 | Seat, exhaust valve | 6.12 | 8 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
G
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FXE
Volume
1.50
Frame
DAA-NKE165G
Produсtion years
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 11101-21080 | Head sub-assy, cylinder | 719.47 | 1 | |
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| 11201-21080 | Cover sub-assy, cylinder head | 119.91 | 1 | |
|
11213-21011
|
Gasket, cylinder head cover | 8.89 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| 15330-21040 | Valve assy, camshaft timing oil control | 63.84 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
| 90126-08050 | Bolt, double sided | 1.00 | - | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| 90341-20002 | Plug | 1.55 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90430-20004 | Gasket | 1.00 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 91551-80614 | Bolt | 1.00 | - | |
|
91551-80625
|
Bolt | 1.00 | - | |
| 91551-80660 | Bolt | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 91672-81025 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21040 | Seat, exhaust valve | 6.45 | 8 | |
| 11136-21040 | Seat, exhaust valve | 6.12 | 8 | |
| WASHER, SEAL(FOR CYLINDER HEAD COVER) | ||||
| 90210-05008 | Washer, seal(for cylinder head cover) | 1.00 | 2 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||
Scheme fits to:
Steering wheel
Right
Body style
Wagon
Grade
HBD
Drive
FF
Transmission
CVT
Fuel
Gasoline
Engine
1NZ-FXE
Volume
1.50
Frame
DAA-NKE165G
Produсtion years
2013
2014
2015
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 90099-14137 | O-ring(for cam timing oil control valve) | 1.55 | - | |
| 90126-06009 | Bolt, double sided | 1.12 | - | |
| 90126-08050 | Bolt, double sided | 1.00 | - | |
| 90301-14016 | O ring, cam position sensor; O ring, crank position sensor | 2.24 | - | |
| 91551-80614 | Bolt | 1.00 | - | |
|
91551-80625
|
Bolt | 1.00 | - | |
| 91551-80660 | Bolt | 1.00 | - | |
| 91552-81022 | - | 1.00 | - | |
| 91671-80612 | Bolt | 1.00 | - | |
| 94150-10641 | Nut | 1.00 | - | |
|
11213-21011
|
Gasket, cylinder head cover | 8.89 | 1 | |
| 12180-38010 | Cap assy, oil filler; Cap sub-assy, oil filler | 5.52 | 1 | |
| 90430-35001 | Gasket (for oil filler cap) | 1.00 | 1 | |
| 11101-21080 | Head sub-assy, cylinder | 719.47 | 1 | |
| 12281-21090 | Hanger, engine, no.1 | 8.11 | 2 | |
| 11201-21080 | Cover sub-assy, cylinder head | 119.91 | 1 | |
|
90910-02170
|
Bolt (for cylinder head set) | 2.07 | 10 | |
| 90201-09024 | Washer, plate (for cylinder head set) | 1.00 | 10 | |
| 15330-21040 | Valve assy, camshaft timing oil control | 63.84 | 1 | |
|
90919-05024
|
Sensor, cam position | 35.63 | 1 | |
| 15678-21010 | Filter, oil control valve | 3.64 | 1 | |
| 90430-20004 | Gasket | 1.00 | 1 | |
| 90250-06001 | Pin | 1.00 | 2 | |
| 90341-20002 | Plug | 1.55 | 1 | |
| 90430-14009 | Gasket | 1.00 | 1 | |
| 90341-14013 | Plug, w/head straight screw no.3 (for cylinder block); Plug, w/head taper screw, no.1; Plug, w/head taper screw, no.2 | 1.04 | 1 | |
| BOLT(FOR HEAD TO CAMSHAFT BEARING CAP) | ||||
| 90109-06080 | Bolt | 1.00 | 16 | |
| 90119-08A29 | Bolt (for head to camshaft bearing cap) | 1.00 | 3 | |
| BUSH, INTAKE VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| BUSH, EXHAUST VALVE GUIDE | ||||
| 11122-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 4.31 | 8 | |
| 11123-21010 | Bush, exhaust valve guide; Bush, intake valve guide | 3.97 | 8 | |
| GASKET, CYLINDER HEAD | ||||
| 11115-21090 | Gasket, cylinder head | 22.77 | 1 | |
| 11115-21091 | Gasket, cylinder head | 22.77 | 1 | |
| SEAT, INTAKE VALVE | ||||
| 11131-21020 | Seat, intake valve | 7.33 | 8 | |
| 11132-21020 | Seat, intake valve | 10.70 | 8 | |
| SEAT, EXHAUST VALVE | ||||
| 11135-21040 | Seat, exhaust valve | 6.45 | 8 | |
| 11136-21040 | Seat, exhaust valve | 6.12 | 8 | |
| WASHER, SEAL(FOR CYLINDER HEAD COVER) | ||||
| 90210-05008 | Washer, seal(for cylinder head cover) | 1.00 | 2 | |
|
90210-06013
|
Washer, seal | 1.00 | 2 | |
| Subschemes | ||||
| RADIATOR & WATER OUTLET | ||||
| ELECTRONIC FUEL INJECTION SYSTEM | ||||
| HEATING & AIR CONDITIONING - WATER PIPING | ||||