Transfer case & extension housing for Toyota Corona Exiv T200, 2 generation 10.1993 - 07.1995
Scheme fits to:
Steering wheel
Right
Body style
Sedan
Grade
TRG4
Drive
4WD
Transmission
MT
Fuel
Gasoline
Engine
3S-GE
Volume
2.00
Frame
E-ST205
Produсtion years
1994
1995
Report error
We cannot guarantee 100% compatibility.
Contact us
so we could check for you!
| Number | Name | Price from, USD | Required |
|---|
| 33117-32030 | Protector, transfer case | Discontinued | 1 | |
|
33146-30020
|
Deflector, extension housing dust | 8.55 | 1 | |
| 33183-20050 | Damper, transfer dynamic | 69.88 | 1 | |
| 36109-20012 | Housing sub-assy, transfer extension | 94.03 | 1 | |
| 36113-20030 | Case, transfer, rh | 350.25 | 1 | |
| 36114-12030 | Case, transfer, lh | 259.67 | 1 | |
| 36116-12010 | Cage, transfer pinion bearing | 75.05 | 1 | |
| 36118-32011 | Plate, transfer stiffener, rh | Discontinued | 1 | |
| 36119-32010 | Plate, transfer stiffener, center | 39.77 | 1 | |
| 36124-12010 | Cover, transfer inspection hole | 4.05 | 1 | |
| 36129-20010 | Tube, transfer oil | 12.08 | 1 | |
| 90105-08040 | Bolt | 1.00 | 2 | |
| 90105-08129 | - | 1.19 | - | |
| 90105-10210 | - | 1.90 | - | |
| 90105-10216 | Bolt (for transfer oil receiver no.1) | 1.04 | - | |
| 90105-12137 | Bolt (for transfer & transaxle setting) | Discontinued | 3 | |
| 90116-12018 | Bolt, stud (for transfer & transaxle setting) | Discontinued | 3 | |
| 90119-08276 | - | Discontinued | - | |
| 90179-10016 | Nut | 1.00 | - | |
| 90179-12068 | Nut (for transaxle case cover) | 1.00 | - | |
| 90301-63005 | Ring, o (for transfer extension housing) | 1.55 | 1 | |
| 90301-99049 | Ring, o (for transfer pinion bearing cage) | 3.02 | 1 | |
|
90311-38032
|
Seal, oil | 2.84 | 1 | |
|
90311-47003
|
Seal, oil | 5.47 | 1 | |
| 90331-08002 | Plug, tight | 1.00 | 1 | |
| 90331-14004 | Pin, ring (for manual transmission case) | 2.93 | 1 | |
| 90341-12004 | Plug (for differential lock shift fork shaft) | 1.21 | 1 | |
|
90341-18006
|
Plug | 1.55 | 1 | |
| 90341-18023 | Gasket (for rear differential filler plug) | 1.64 | 1 | |
| 90341-22001 | Plug | Discontinued | 1 | |
|
90430-18008
|
Gasket (for atm speedometer driven hole cover) | 1.00 | 1 | |
| 90430-22002 | Gasket | 2.42 | 1 | |
| 90540-06027 | Cushion (for transfer oil tube) | Discontinued | 1 | |
| 91511-61045 | Bolt, flange (for idler) | 2.33 | - | |
| 91512-61020 | - | 1.12 | - | |
|
91512-61035
|
Bolt | 1.00 | - | |
| 91611-60816 | Bolt | 1.00 | - | |
| 91611-60820 | Bolt | 1.08 | - | |
| 91611-61030 | - | 1.00 | - | |
| PIN, STRAIGHT (FOR TRANSFER CASE) | ||||
| 90250-10017 | Pin, straight | 1.03 | 2 | |
| 90250-12005 | Pin, straight | 1.90 | 2 | |
