Number | Name | Price from, USD | Required |
---|
33032-32030 | Gear, 1st | Discontinued | 1 | |
33035-32050 | Gear, 4th | 95.32 | 1 | |
33125-32011 | Receiver, manual transaxle case | 3.06 | 1 | |
33134-33010 | Cover, output shaft (mtm) | Discontinued | 1 | |
33151-32012 | Retainer, bearing, rear (mtm) | Discontinued | 1 | |
33321-33040 | Shaft, output | Discontinued | 1 | |
33326-32010 | Plate, bearing lock | 1.84 | 1 | |
33336-33030 | Gear, 5th | Discontinued | 1 | |
33343-33010 | Bush, 2nd gear | Discontinued | 1 | |
33348-32010 | Washer, 1st gear thrust | Discontinued | 1 | |
33361-33020 | Hub, transmission clutch, no.1 | 47.22 | 1 | |
33365-33020 | Key, synchromesh shifting, no.1 | 2.45 | 3 | |
33366-32020 | Key, synchromesh shifting, no.2 | Discontinued | 3 | |
33367-33010 | Ring, synchronizer, no.1 | Discontinued | 1 | |
33391-32010 | Spring, synchromesh shifting key, no.2 | Discontinued | 2 | |
33393-33010 | Hub, transmission clutch, no.3 | Discontinued | 1 | |
33395-33010 | Sleeve, transmission hub, no.3 | 89.65 | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
33399-33010 | Ring, synchronizer, outer no.5 | 28.78 | 1 | |
33402-33010 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-32050 | Gear, 4th driven | Discontinued | 1 | |
33423-32030 | Gear, 3rd driven | Discontinued | 1 | |
33428-32050 | Gear, 5th driven | Discontinued | 1 | |
33431-32020 | Spacer, output gear | 9.09 | 1 | |
33451-32010 | Shaft, reverse idler gear | 27.37 | 1 | |
90105-08041 | Bolt | Discontinued | 1 | |
90105-08237 | Bolt (for rear bearing retainer) | Discontinued | 5 | |
90179-18003 | Nut (for manual transmission output shaft rear set) | 2.97 | 1 | |
90254-10001 | Pin, slotted spring (for output shaft) | Discontinued | 1 | |
90360-05012 | Ball | 1.00 | 1 | |
90363-25056 | Bearing | 14.84 | 1 | |
90363-29006 | Bearing, radial ball (for input shaft rear) | 17.07 | 1 | |
90364-27005 | Bearing, needle roller (for 5th gear) | 13.83 | 1 | |
90364-32013 | Bearing, needle roller (for 4th gear) | Discontinued | 1 | |
90364-33001 | Bearing, needle roller | 20.03 | 1 | |
90364-38004 | Bearing, needle roller (for 1st gear) | Discontinued | 1 | |
90364-39013 | Bearing, needle roller (for 2nd gear) | Discontinued | 1 | |
90365-30017 | Bearing (for input shaft front) | 21.17 | 1 | |
90365-32013 | Bearing (for output shaft front) | 22.97 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90501-08141 | Spring | 1.00 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
90521-66004 | Ring, hole snap (for output shaft rear bearing) | Discontinued | 1 | |
90521-76001 | Ring, hole snap (for input shaft rear bearing) | Discontinued | 1 | |
90560-27004 | Spacer (for 5th gear bearing) | Discontinued | 1 | |
90560-32007 | Spacer (for 4th gear bearing) | 2.10 | 1 | |
91611-60616 | Bolt | 1.00 | 2 | |
91611-60820 | Bolt | 1.08 | - | |
GEAR, 2ND | ||||
33332-33020 | Gear, 2nd | 124.18 | 1 | |
33332-33021 | Gear, 2nd | Discontinued | 1 | |
GEAR, REVERSE | ||||
33331-33020 | Gear, reverse | Discontinued | 1 | |
33331-33021 | Gear, reverse | Discontinued | 1 | |
SHAFT, INPUT | ||||
33311-33050 | Shaft, input | 408.40 | 1 | |
33311-33051 | Shaft, input | 411.02 | 1 | |
RING SET, SYNCHRONIZER, NO.2 | ||||
33038-33010 | Ring set, synchronizer, no.2 | Discontinued | 1 | |
33038-33011 | Ring set, synchronizer, no.2 | 50.72 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.2 | ||||
33364-32012 | Sleeve, transmission hub, no.2 | 66.30 | 1 | |
33364-32013 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
GEAR, 3RD | ||||
33034-32031 | Gear, 3rd | Discontinued | 1 | |
33034-32032 | Gear, 3rd | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-30002 | Ring, shaft snap | 1.32 | 1 | |
90520-30003 | Ring, shaft snap | 1.31 | 1 | |
90520-30004 | Ring, shaft snap | 1.32 | 1 | |
90520-30005 | Ring, shaft snap | 1.31 | 1 | |
90520-30006 | Ring, shaft snap | 1.31 | 1 | |
90520-30007 | Ring, shaft snap | 1.31 | 1 | |
HUB, TRANSMISSION CLUTCH, NO.2 | ||||
33362-33010 | Hub, transmission clutch, no.2 | 43.46 | 1 | |
33362-33011 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
RING, SYNCHRONIZER, INNER NO.5 | ||||
33397-33011 | Ring, synchronizer, inner no.5 | Discontinued | 1 | |
33397-33012 | Ring, synchronizer, inner no.5 | Discontinued | 1 | |
RING, SYNCHRONIZER, NO.2 | ||||
33368-17010 | Ring, synchronizer, no.2 | 66.30 | 1 | |
33368-17011 | Ring, synchronizer, no.2 | 28.33 | 1 | |
33368-32020 | Ring, synchronizer, no.2 | 25.01 | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-33010 | Spring, synchromesh shifting key, no.3 | Discontinued | 1 | |
33392-33021 | Spring, synchromesh shifting key, no.3 | 1.57 | 1 | |
RING, SYNCHRONIZER PULL | ||||
33396-33011 | Ring, synchronizer pull | Discontinued | 1 | |
33396-33012 | Ring, synchronizer pull | 28.78 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-27018 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27019 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27020 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27021 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27022 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-20034 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20035 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20036 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20051 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20052 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20053 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20054 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20055 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20056 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20057 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20058 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20059 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20060 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20061 | Ring | 1.40 | 1 | |
90520-20062 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
WASHER, REVERSE IDLER THRUST | ||||
33462-12010 | Washer, reverse idler thrust | 5.01 | 1 | |
33462-32010 | Washer, reverse idler thrust | 2.71 | 1 |
Number | Name | Price from, USD | Required |
---|
33034-32032 | Gear, 3rd | Discontinued | 1 | |
33035-32050 | Gear, 4th | 95.32 | 1 | |
33038-33011 | Ring set, synchronizer, no.2 | 50.72 | 1 | |
33134-33010 | Cover, output shaft (mtm) | Discontinued | 1 | |
33151-32012 | Retainer, bearing, rear (mtm) | Discontinued | 1 | |
33321-33040 | Shaft, output | Discontinued | 1 | |
33326-32010 | Plate, bearing lock | 1.84 | 1 | |
33332-33021 | Gear, 2nd | Discontinued | 1 | |
33336-33030 | Gear, 5th | Discontinued | 1 | |
33343-33010 | Bush, 2nd gear | Discontinued | 1 | |
33348-32010 | Washer, 1st gear thrust | Discontinued | 1 | |
33362-33011 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33364-32013 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
33365-33020 | Key, synchromesh shifting, no.1 | 2.45 | 3 | |
33366-32020 | Key, synchromesh shifting, no.2 | Discontinued | 3 | |
33367-33010 | Ring, synchronizer, no.1 | Discontinued | 1 | |
33391-32010 | Spring, synchromesh shifting key, no.2 | Discontinued | 2 | |
33393-33010 | Hub, transmission clutch, no.3 | Discontinued | 1 | |
33395-33010 | Sleeve, transmission hub, no.3 | 89.65 | 1 | |
33396-33012 | Ring, synchronizer pull | 28.78 | 1 | |
33397-33012 | Ring, synchronizer, inner no.5 | Discontinued | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
33399-33010 | Ring, synchronizer, outer no.5 | 28.78 | 1 | |
33422-32050 | Gear, 4th driven | Discontinued | 1 | |
33423-32030 | Gear, 3rd driven | Discontinued | 1 | |
33428-32050 | Gear, 5th driven | Discontinued | 1 | |
33431-32020 | Spacer, output gear | 9.09 | 1 | |
33451-32010 | Shaft, reverse idler gear | 27.37 | 1 | |
33462-12010 | Washer, reverse idler thrust | 5.01 | 1 | |
90105-08041 | Bolt | Discontinued | 1 | |
90105-08237 | Bolt (for rear bearing retainer) | Discontinued | 5 | |
90179-18003 | Nut (for manual transmission output shaft rear set) | 2.97 | 1 | |
90360-05012 | Ball | 1.00 | 1 | |
90363-25056 | Bearing | 14.84 | 1 | |
90363-29006 | Bearing, radial ball (for input shaft rear) | 17.07 | 1 | |
90364-27005 | Bearing, needle roller (for 5th gear) | 13.83 | 1 | |
90364-32013 | Bearing, needle roller (for 4th gear) | Discontinued | 1 | |
90364-33001 | Bearing, needle roller | 20.03 | 1 | |
90364-38004 | Bearing, needle roller (for 1st gear) | Discontinued | 1 | |
90364-39013 | Bearing, needle roller (for 2nd gear) | Discontinued | 1 | |
90365-30017 | Bearing (for input shaft front) | 21.17 | 1 | |
90365-32013 | Bearing (for output shaft front) | 22.97 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90501-08141 | Spring | 1.00 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
90521-66004 | Ring, hole snap (for output shaft rear bearing) | Discontinued | 1 | |
90521-76001 | Ring, hole snap (for input shaft rear bearing) | Discontinued | 1 | |
90560-27004 | Spacer (for 5th gear bearing) | Discontinued | 1 | |
90560-32007 | Spacer (for 4th gear bearing) | 2.10 | 1 | |
91611-60820 | Bolt | 1.08 | - | |
91611-60616 | Bolt | 1.00 | 2 | |
GEAR, 1ST | ||||
33032-32030 | Gear, 1st | Discontinued | 1 | |
33032-32032 | Gear, 1st | Discontinued | 1 | |
GEAR, REVERSE | ||||
33331-33021 | Gear, reverse | Discontinued | 1 | |
33331-33022 | Gear, reverse | Discontinued | 1 | |
SHAFT, INPUT | ||||
33311-33051 | Shaft, input | 411.02 | 1 | |
33311-33052 | Shaft, input | 411.90 | 1 | |
HUB, TRANSMISSION CLUTCH, NO.1 | ||||
33361-33020 | Hub, transmission clutch, no.1 | 47.22 | 1 | |
33361-33021 | Hub, transmission clutch, no.1 | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-30002 | Ring, shaft snap | 1.32 | 1 | |
90520-30003 | Ring, shaft snap | 1.31 | 1 | |
90520-30004 | Ring, shaft snap | 1.32 | 1 | |
90520-30005 | Ring, shaft snap | 1.31 | 1 | |
90520-30006 | Ring, shaft snap | 1.31 | 1 | |
90520-30007 | Ring, shaft snap | 1.31 | 1 | |
RING, SYNCHRONIZER, NO.2 | ||||
33368-17011 | Ring, synchronizer, no.2 | 28.33 | 1 | |
33368-32020 | Ring, synchronizer, no.2 | 25.01 | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-33010 | Spring, synchromesh shifting key, no.3 | Discontinued | 1 | |
33392-33021 | Spring, synchromesh shifting key, no.3 | 1.57 | 1 | |
GEAR SUB-ASSY, REVERSE IDLER | ||||
33402-33010 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33402-33011 | Gear sub-assy, reverse idler | 91.82 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-27018 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27019 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27020 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27021 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27022 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-20034 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20035 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20036 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20051 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20052 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20053 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20054 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20055 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20056 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20057 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20058 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20059 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20060 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20061 | Ring | 1.40 | 1 | |
90520-20062 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
RECEIVER, MANUAL TRANSAXLE CASE | ||||
33125-32011 | Receiver, manual transaxle case | 3.06 | 1 | |
33326-21010 | Plate, bearing lock | 3.06 | 1 |
Number | Name | Price from, USD | Required |
---|
91611-60820 | Bolt | 1.08 | - |
Number | Name | Price from, USD | Required |
---|
33125-20010 | Receiver, manual transaxle case | 2.27 | 1 | |
33134-20010 | Cover, output shaft (mtm) | 4.37 | 1 | |
33151-20031 | Retainer, bearing, rear (mtm) | 26.15 | 1 | |
33402-20050 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-17020 | Gear, 4th driven | Discontinued | 1 | |
33423-17020 | Gear, 3rd driven | Discontinued | 1 | |
33428-20060 | Gear, 5th driven | 66.46 | 1 | |
33431-20080 | Spacer, output gear | 11.54 | 1 | |
33451-20040 | Shaft, reverse idler gear | Discontinued | 1 | |
33462-20050 | Washer, reverse idler thrust | 2.36 | 1 | |
90105-08150 | Bolt (for reverse idler gear shaft) | 1.00 | 1 | |
90149-80029 | Screw (for rear bearing retainer) | 1.05 | 7 | |
90179-20012 | Nut (for manual transmission output shaft rear set) | 2.71 | 1 | |
90363-33007 | Bearing, radial ball (for input shaft rear) | 18.36 | 1 | |
90364-36007 | Bearing, needle roller (for 3rd gear) | 11.38 | 1 | |
90364-36010 | Bearing, needle roller (for 4th gear) | 10.51 | 1 | |
90364-39006 | Bearing, needle roller (for 2nd gear) | 13.97 | 1 | |
90364-39008 | Bearing, needle roller (for 1st gear) | 14.84 | 1 | |
90365-30023 | Bearing (for input shaft front) | 30.54 | 1 | |
90366-28007 | Bearing (for output shaft rear) | 15.70 | 1 | |
90366-32002 | Bearing (for output shaft front) | 19.23 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90520-76003 | Ring, shaft snap (for input shaft rear bearing) | 1.84 | 1 | |
90560-36002 | Spacer (for 4th gear bearing) | 1.05 | 1 | |
90560-39003 | Spacer (for 2nd gear bearing) | 1.05 | 1 | |
91611-60616 | Bolt | 1.00 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
GEAR, 2ND | ||||
33033-17010 | Gear, 2nd | Discontinued | 1 | |
33332-20100 | Gear, 2nd | Discontinued | 1 | |
33332-20101 | Gear, 2nd | 106.69 | 1 | |
GEAR, 1ST | ||||
33032-17010 | Gear, 1st | 130.30 | 1 | |
33335-17020 | Gear, 1st | Discontinued | 1 | |
GEAR, REVERSE | ||||
33331-20050 | Gear, reverse | Discontinued | 1 | |
33331-20060 | Gear, reverse | Discontinued | 1 | |
33331-20061 | Gear, reverse | 118.06 | 1 | |
SHAFT, OUTPUT | ||||
33321-20110 | Shaft, output | 146.92 | 1 | |
33321-32080 | Shaft, output | Discontinued | 1 | |
SHAFT, INPUT | ||||
33311-17020 | Shaft, input | 246.61 | 1 | |
33311-17040 | Shaft, input | Discontinued | 1 | |
HUB, TRANSMISSION CLUTCH, NO.1 | ||||
33361-20040 | Hub, transmission clutch, no.1 | Discontinued | 1 | |
33361-33010 | Hub, transmission clutch, no.1 | 66.46 | 1 | |
RING SET, SYNCHRONIZER, NO.2 | ||||
33038-12011 | Ring set, synchronizer, no.2 | Discontinued | 1 | |
33038-12012 | Ring set, synchronizer, no.2 | 56.84 | 1 | |
RING SET, SYNCHRONIZER, NO.3 | ||||
33039-12010 | Ring set, synchronizer, no.3 | Discontinued | 1 | |
33039-12011 | Ring set, synchronizer, no.3 | 85.70 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.2 | ||||
33364-12020 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
33364-12021 | Sleeve, transmission hub, no.2 | 50.72 | 1 | |
33364-20024 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
33366-12030 | Key, synchromesh shifting, no.2 | 2.62 | 3 | |
33366-20021 | Key, synchromesh shifting, no.2 | Discontinued | 3 | |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | ||||
90564-60001 | Shim (for output shaft rear bearing) | 1.00 | 1 | |
90564-60002 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60003 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60004 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60005 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60006 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60007 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60008 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60009 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60010 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60011 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60012 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60013 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60014 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60015 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60016 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60017 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60018 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60019 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60020 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60021 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60022 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60023 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60024 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
90564-60025 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
GEAR, 3RD | ||||
33034-17020 | Gear, 3rd | Discontinued | 1 | |
33034-17021 | Gear, 3rd | Discontinued | 1 | |
33034-17030 | Gear, 3rd | Discontinued | 1 | |
33034-17031 | Gear, 3rd | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-34003 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34004 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34005 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34006 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34007 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34008 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34009 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | ||||
90364-28015 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
90364-33004 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
HUB, TRANSMISSION CLUTCH, NO.2 | ||||
33362-12030 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33362-20021 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
GEAR, 4TH | ||||
33035-17020 | Gear, 4th | 132.05 | 1 | |
33035-17021 | Gear, 4th | 132.05 | 1 | |
33035-17030 | Gear, 4th | Discontinued | 1 | |
GEAR, 5TH | ||||
33036-20050 | Gear, 5th | Discontinued | 1 | |
33336-20070 | Gear, 5th | Discontinued | 1 | |
RING, SYNCHRONIZER, INNER NO.5 | ||||
33397-12010 | Ring, synchronizer, inner no.5 | 47.22 | 1 | |
33397-12011 | Ring, synchronizer, inner no.5 | 27.03 | 1 | |
RING, SYNCHRONIZER, NO.2 | ||||
33368-12041 | Ring, synchronizer, no.2 | 30.70 | 1 | |
33368-20030 | Ring, synchronizer, no.2 | Discontinued | 2 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-12010 | Spring, synchromesh shifting key, no.3 | 2.01 | 1 | |
33392-12020 | Spring, synchromesh shifting key, no.3 | 1.00 | 1 | |
33392-20010 | Spring, synchromesh shifting key, no.3 | Discontinued | 1 | |
HUB, TRANSMISSION CLUTCH, NO.3 | ||||
33393-12020 | Hub, transmission clutch, no.3 | 47.22 | 1 | |
33393-12021 | Hub, transmission clutch, no.3 | 49.94 | 1 | |
33393-20020 | Hub, transmission clutch, no.3 | Discontinued | 1 | |
RING, SYNCHRONIZER PULL | ||||
33396-12010 | Ring, synchronizer pull | 47.22 | 1 | |
33396-12011 | Ring, synchronizer pull | 31.13 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-30008 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30009 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30010 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30011 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
90520-30012 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30013 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30021 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30022 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.3 | ||||
33395-12020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
33395-20020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-27037 | Ring, shaft snap | Discontinued | 1 | |
90520-27038 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27039 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27040 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27041 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27042 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27043 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27044 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27045 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27061 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27062 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27063 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27064 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-27065 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27066 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27067 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27068 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27069 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | ||||
33391-20010 | Spring, synchromesh shifting key, no.2 | Discontinued | 2 | |
90501-08131 | Spring, synchromesh shifting key, no.2 | 1.22 | 3 | |
KEY, SYNCHROMESH SHIFTING, NO.1 | ||||
33365-20050 | Key, synchromesh shifting, no.1 | Discontinued | 3 | |
33365-33010 | Key, synchromesh shifting, no.1 | 2.72 | 3 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | ||||
33371-20020 | Spring, synchromesh shifting key, no.1 | Discontinued | 2 | |
33371-33010 | Spring, synchromesh shifting key, no.1 | 1.92 | 2 | |
RING, SYNCHRONIZER, NO.1 | ||||
33367-12040 | Ring, synchronizer, no.1 | 34.02 | 1 | |
33367-20040 | Ring, synchronizer | Discontinued | 1 | |
33367-20050 | Ring, synchronizer | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | ||||
90520-37004 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37005 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37006 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37007 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37008 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37009 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37010 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
RING, SYNCHRONIZER, OUTER NO.5 | ||||
33399-12010 | Ring, synchronizer, outer no.5 | 47.22 | 1 | |
33399-12011 | Ring, synchronizer, outer no.5 | 31.13 | 1 |
Number | Name | Price from, USD | Required |
---|
33035-17030 | Gear, 4th | Discontinued | 1 | |
33125-20010 | Receiver, manual transaxle case | 2.27 | 1 | |
33134-20010 | Cover, output shaft (mtm) | 4.37 | 1 | |
33151-20031 | Retainer, bearing, rear (mtm) | 26.15 | 1 | |
33311-17040 | Shaft, input | Discontinued | 1 | |
33321-32080 | Shaft, output | Discontinued | 1 | |
33335-17020 | Gear, 1st | Discontinued | 1 | |
33336-20070 | Gear, 5th | Discontinued | 1 | |
33361-33010 | Hub, transmission clutch, no.1 | 66.46 | 1 | |
33365-33010 | Key, synchromesh shifting, no.1 | 2.72 | 3 | |
33366-12030 | Key, synchromesh shifting, no.2 | 2.62 | 3 | |
33367-12040 | Ring, synchronizer, no.1 | 34.02 | 1 | |
33368-12041 | Ring, synchronizer, no.2 | 30.70 | 1 | |
33371-33010 | Spring, synchromesh shifting key, no.1 | 1.92 | 2 | |
33395-12020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
33402-20050 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-17020 | Gear, 4th driven | Discontinued | 1 | |
33423-17020 | Gear, 3rd driven | Discontinued | 1 | |
33428-20060 | Gear, 5th driven | 66.46 | 1 | |
33431-20080 | Spacer, output gear | 11.54 | 1 | |
33451-20040 | Shaft, reverse idler gear | Discontinued | 1 | |
33462-20050 | Washer, reverse idler thrust | 2.36 | 1 | |
90105-08150 | Bolt (for reverse idler gear shaft) | 1.00 | 1 | |
90149-80029 | Screw (for rear bearing retainer) | 1.05 | 7 | |
90179-20012 | Nut (for manual transmission output shaft rear set) | 2.71 | 1 | |
90363-33007 | Bearing, radial ball (for input shaft rear) | 18.36 | 1 | |
90364-28015 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
90364-36007 | Bearing, needle roller (for 3rd gear) | 11.38 | 1 | |
90364-36010 | Bearing, needle roller (for 4th gear) | 10.51 | 1 | |
90364-39006 | Bearing, needle roller (for 2nd gear) | 13.97 | 1 | |
90364-39008 | Bearing, needle roller (for 1st gear) | 14.84 | 1 | |
90365-30023 | Bearing (for input shaft front) | 30.54 | 1 | |
90366-28007 | Bearing (for output shaft rear) | 15.70 | 1 | |
90366-32002 | Bearing (for output shaft front) | 19.23 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90501-08131 | Spring, synchromesh shifting key, no.2 | 1.22 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
90520-76003 | Ring, shaft snap (for input shaft rear bearing) | 1.84 | 1 | |
90560-36002 | Spacer (for 4th gear bearing) | 1.05 | 1 | |
90560-39003 | Spacer (for 2nd gear bearing) | 1.05 | 1 | |
91611-60616 | Bolt | 1.00 | 3 | |
GEAR, 2ND | ||||
33332-20100 | Gear, 2nd | Discontinued | 1 | |
33332-20101 | Gear, 2nd | 106.69 | 1 | |
GEAR, REVERSE | ||||
33331-20060 | Gear, reverse | Discontinued | 1 | |
33331-20061 | Gear, reverse | 118.06 | 1 | |
RING SET, SYNCHRONIZER, NO.2 | ||||
33038-12011 | Ring set, synchronizer, no.2 | Discontinued | 1 | |
33038-12012 | Ring set, synchronizer, no.2 | 56.84 | 1 | |
RING SET, SYNCHRONIZER, NO.3 | ||||
33039-12010 | Ring set, synchronizer, no.3 | Discontinued | 1 | |
33039-12011 | Ring set, synchronizer, no.3 | 85.70 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.2 | ||||
33364-12020 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
33364-12021 | Sleeve, transmission hub, no.2 | 50.72 | 1 | |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | ||||
90564-60001 | Shim (for output shaft rear bearing) | 1.00 | 1 | |
90564-60002 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60003 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60004 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60005 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60006 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60007 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60008 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60009 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60010 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60011 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60012 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60013 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60014 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60015 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60016 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60017 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60018 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60019 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60020 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60021 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60022 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60023 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60024 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
90564-60025 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
GEAR, 3RD | ||||
33034-17030 | Gear, 3rd | Discontinued | 1 | |
33034-17031 | Gear, 3rd | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-34003 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34004 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34005 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34006 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34007 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34008 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34009 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
HUB, TRANSMISSION CLUTCH, NO.2 | ||||
33362-12030 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33362-12031 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
RING, SYNCHRONIZER, INNER NO.5 | ||||
33397-12010 | Ring, synchronizer, inner no.5 | 47.22 | 1 | |
33397-12011 | Ring, synchronizer, inner no.5 | 27.03 | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-12010 | Spring, synchromesh shifting key, no.3 | 2.01 | 1 | |
33392-12020 | Spring, synchromesh shifting key, no.3 | 1.00 | 1 | |
HUB, TRANSMISSION CLUTCH, NO.3 | ||||
33393-12020 | Hub, transmission clutch, no.3 | 47.22 | 1 | |
33393-12021 | Hub, transmission clutch, no.3 | 49.94 | 1 | |
RING, SYNCHRONIZER PULL | ||||
33396-12010 | Ring, synchronizer pull | 47.22 | 1 | |
33396-12011 | Ring, synchronizer pull | 31.13 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-30008 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30009 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30010 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30011 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
90520-30012 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30013 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30021 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30022 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-27037 | Ring, shaft snap | Discontinued | 1 | |
90520-27038 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27039 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27040 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27041 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27042 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27043 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27044 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27045 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27061 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27062 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27063 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27064 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-27065 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27066 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27067 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27068 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27069 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | ||||
90520-37004 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37005 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37006 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37007 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37008 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37009 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37010 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
RING, SYNCHRONIZER, OUTER NO.5 | ||||
33399-12010 | Ring, synchronizer, outer no.5 | 47.22 | 1 | |
33399-12011 | Ring, synchronizer, outer no.5 | 31.13 | 1 |
Number | Name | Price from, USD | Required |
---|
33034-17031 | Gear, 3rd | Discontinued | 1 | |
33035-17030 | Gear, 4th | Discontinued | 1 | |
33038-12012 | Ring set, synchronizer, no.2 | 56.84 | 1 | |
33039-12011 | Ring set, synchronizer, no.3 | 85.70 | 1 | |
33125-20010 | Receiver, manual transaxle case | 2.27 | 1 | |
33134-20010 | Cover, output shaft (mtm) | 4.37 | 1 | |
33151-20031 | Retainer, bearing, rear (mtm) | 26.15 | 1 | |
33311-17040 | Shaft, input | Discontinued | 1 | |
33321-32080 | Shaft, output | Discontinued | 1 | |
33331-20061 | Gear, reverse | 118.06 | 1 | |
33332-20101 | Gear, 2nd | 106.69 | 1 | |
33335-17020 | Gear, 1st | Discontinued | 1 | |
33336-20070 | Gear, 5th | Discontinued | 1 | |
33361-33010 | Hub, transmission clutch, no.1 | 66.46 | 1 | |
33364-12021 | Sleeve, transmission hub, no.2 | 50.72 | 1 | |
33365-33010 | Key, synchromesh shifting, no.1 | 2.72 | 3 | |
33366-12030 | Key, synchromesh shifting, no.2 | 2.62 | 3 | |
33367-12040 | Ring, synchronizer, no.1 | 34.02 | 1 | |
33368-12041 | Ring, synchronizer, no.2 | 30.70 | 1 | |
33371-33010 | Spring, synchromesh shifting key, no.1 | 1.92 | 2 | |
33393-12021 | Hub, transmission clutch, no.3 | 49.94 | 1 | |
33395-12020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
33396-12011 | Ring, synchronizer pull | 31.13 | 1 | |
33397-12011 | Ring, synchronizer, inner no.5 | 27.03 | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
33399-12011 | Ring, synchronizer, outer no.5 | 31.13 | 1 | |
33402-20050 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-17020 | Gear, 4th driven | Discontinued | 1 | |
33423-17020 | Gear, 3rd driven | Discontinued | 1 | |
33428-20060 | Gear, 5th driven | 66.46 | 1 | |
33431-20080 | Spacer, output gear | 11.54 | 1 | |
33451-20040 | Shaft, reverse idler gear | Discontinued | 1 | |
33462-20050 | Washer, reverse idler thrust | 2.36 | 1 | |
90105-08150 | Bolt (for reverse idler gear shaft) | 1.00 | 1 | |
90149-80029 | Screw (for rear bearing retainer) | 1.05 | 7 | |
90179-20012 | Nut (for manual transmission output shaft rear set) | 2.71 | 1 | |
90363-33007 | Bearing, radial ball (for input shaft rear) | 18.36 | 1 | |
90364-28015 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
90364-36007 | Bearing, needle roller (for 3rd gear) | 11.38 | 1 | |
90364-36010 | Bearing, needle roller (for 4th gear) | 10.51 | 1 | |
90364-39006 | Bearing, needle roller (for 2nd gear) | 13.97 | 1 | |
90364-39008 | Bearing, needle roller (for 1st gear) | 14.84 | 1 | |
90365-30023 | Bearing (for input shaft front) | 30.54 | 1 | |
90366-28007 | Bearing (for output shaft rear) | 15.70 | 1 | |
90366-32002 | Bearing (for output shaft front) | 19.23 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90501-08131 | Spring, synchromesh shifting key, no.2 | 1.22 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
90520-76003 | Ring, shaft snap (for input shaft rear bearing) | 1.84 | 1 | |
90560-36002 | Spacer (for 4th gear bearing) | 1.05 | 1 | |
90560-39003 | Spacer (for 2nd gear bearing) | 1.05 | 1 | |
91611-60616 | Bolt | 1.00 | 3 | |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | ||||
90564-60001 | Shim (for output shaft rear bearing) | 1.00 | 1 | |
90564-60002 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60003 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60004 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60005 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60006 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60007 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60008 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60009 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60010 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60011 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60012 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60013 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60014 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60015 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60016 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60017 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60018 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60019 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60020 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60021 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60022 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60023 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60024 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
90564-60025 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-34003 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34004 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34005 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34006 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34007 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34008 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34009 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
HUB, TRANSMISSION CLUTCH, NO.2 | ||||
33362-12030 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33362-12031 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-12010 | Spring, synchromesh shifting key, no.3 | 2.01 | 1 | |
33392-12020 | Spring, synchromesh shifting key, no.3 | 1.00 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-30008 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30009 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30010 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30011 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
90520-30012 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30013 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30021 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30022 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-27061 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27062 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27063 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27064 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-27065 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27066 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27067 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27068 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27069 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | ||||
90520-37004 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37005 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37006 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37007 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37008 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37009 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37010 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 |
Number | Name | Price from, USD | Required |
---|
33034-17031 | Gear, 3rd | Discontinued | 1 | |
33035-17030 | Gear, 4th | Discontinued | 1 | |
33038-12012 | Ring set, synchronizer, no.2 | 56.84 | 1 | |
33125-20010 | Receiver, manual transaxle case | 2.27 | 1 | |
33134-20010 | Cover, output shaft (mtm) | 4.37 | 1 | |
33151-20031 | Retainer, bearing, rear (mtm) | 26.15 | 1 | |
33311-17040 | Shaft, input | Discontinued | 1 | |
33321-32080 | Shaft, output | Discontinued | 1 | |
33331-20061 | Gear, reverse | 118.06 | 1 | |
33332-20101 | Gear, 2nd | 106.69 | 1 | |
33335-17020 | Gear, 1st | Discontinued | 1 | |
33336-20070 | Gear, 5th | Discontinued | 1 | |
33361-33010 | Hub, transmission clutch, no.1 | 66.46 | 1 | |
33362-12031 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33364-12021 | Sleeve, transmission hub, no.2 | 50.72 | 1 | |
33365-33010 | Key, synchromesh shifting, no.1 | 2.72 | 3 | |
33367-12040 | Ring, synchronizer, no.1 | 34.02 | 1 | |
33371-33010 | Spring, synchromesh shifting key, no.1 | 1.92 | 2 | |
33396-12011 | Ring, synchronizer pull | 31.13 | 1 | |
33397-12011 | Ring, synchronizer, inner no.5 | 27.03 | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
33399-12011 | Ring, synchronizer, outer no.5 | 31.13 | 1 | |
33402-20050 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-17020 | Gear, 4th driven | Discontinued | 1 | |
33423-17020 | Gear, 3rd driven | Discontinued | 1 | |
33428-20060 | Gear, 5th driven | 66.46 | 1 | |
33431-20080 | Spacer, output gear | 11.54 | 1 | |
33451-20040 | Shaft, reverse idler gear | Discontinued | 1 | |
33462-20050 | Washer, reverse idler thrust | 2.36 | 1 | |
90105-08150 | Bolt (for reverse idler gear shaft) | 1.00 | 1 | |
90149-80029 | Screw (for rear bearing retainer) | 1.05 | 7 | |
90179-20012 | Nut (for manual transmission output shaft rear set) | 2.71 | 1 | |
90363-33007 | Bearing, radial ball (for input shaft rear) | 18.36 | 1 | |
90364-28015 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
90364-36007 | Bearing, needle roller (for 3rd gear) | 11.38 | 1 | |
90364-36010 | Bearing, needle roller (for 4th gear) | 10.51 | 1 | |
90364-39006 | Bearing, needle roller (for 2nd gear) | 13.97 | 1 | |
90364-39008 | Bearing, needle roller (for 1st gear) | 14.84 | 1 | |
90365-30023 | Bearing (for input shaft front) | 30.54 | 1 | |
90366-28007 | Bearing (for output shaft rear) | 15.70 | 1 | |
90366-32002 | Bearing (for output shaft front) | 19.23 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90501-08131 | Spring, synchromesh shifting key, no.2 | 1.22 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
90520-76003 | Ring, shaft snap (for input shaft rear bearing) | 1.84 | 1 | |
90560-36002 | Spacer (for 4th gear bearing) | 1.05 | 1 | |
90560-39003 | Spacer (for 2nd gear bearing) | 1.05 | 1 | |
91611-60616 | Bolt | 1.00 | 3 | |
RING SET, SYNCHRONIZER, NO.3 | ||||
33039-12011 | Ring set, synchronizer, no.3 | 85.70 | 1 | |
33039-12012 | Ring set, synchronizer, no.3 | Discontinued | 1 | |
KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
33366-12030 | Key, synchromesh shifting, no.2 | 2.62 | 3 | |
33366-12031 | Key, synchromesh shifting, no.2 | Discontinued | 3 | |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | ||||
90564-60001 | Shim (for output shaft rear bearing) | 1.00 | 1 | |
90564-60002 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60003 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60004 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60005 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60006 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60007 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60008 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60009 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60010 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60011 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60012 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60013 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60014 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60015 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60016 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60017 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60018 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60019 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60020 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60021 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60022 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60023 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60024 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
90564-60025 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-34003 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34004 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34005 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34006 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34007 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34008 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34009 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
RING, SYNCHRONIZER, NO.2 | ||||
33368-12041 | Ring, synchronizer, no.2 | 30.70 | 1 | |
33368-12042 | Ring, synchronizer, no.2 | Discontinued | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-12010 | Spring, synchromesh shifting key, no.3 | 2.01 | 1 | |
33392-12020 | Spring, synchromesh shifting key, no.3 | 1.00 | 1 | |
HUB, TRANSMISSION CLUTCH, NO.3 | ||||
33393-12021 | Hub, transmission clutch, no.3 | 49.94 | 1 | |
33393-12022 | Hub, transmission clutch, no.3 | 49.94 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-30008 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30009 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30010 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30011 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
90520-30012 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30013 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30021 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30022 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.3 | ||||
33395-12020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
33395-12021 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-27061 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27062 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27063 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27064 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-27065 | Ring, shaft snap (for transmission clutch hub no.3) | 1.22 | 1 | |
90520-27066 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27067 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27068 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
90520-27069 | Ring, shaft snap (for transmission clutch hub no.3) | 1.00 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | ||||
90520-37004 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37005 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37006 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37007 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37008 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37009 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37010 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 |
Number | Name | Price from, USD | Required |
---|
33125-20010 | Receiver, manual transaxle case | 2.27 | 1 | |
33134-20010 | Cover, output shaft (mtm) | 4.37 | 1 | |
33369-20010 | Ring, synchronizer, no.3 | Discontinued | 1 | |
33402-20050 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-17020 | Gear, 4th driven | Discontinued | 1 | |
33423-17020 | Gear, 3rd driven | Discontinued | 1 | |
33428-20060 | Gear, 5th driven | 66.46 | 1 | |
33431-20080 | Spacer, output gear | 11.54 | 1 | |
33451-20040 | Shaft, reverse idler gear | Discontinued | 1 | |
33462-20050 | Washer, reverse idler thrust | 2.36 | 1 | |
90105-08150 | Bolt (for reverse idler gear shaft) | 1.00 | 1 | |
90179-20012 | Nut (for manual transmission output shaft rear set) | 2.71 | 1 | |
90363-33007 | Bearing, radial ball (for input shaft rear) | 18.36 | 1 | |
90364-36007 | Bearing, needle roller (for 3rd gear) | 11.38 | 1 | |
90364-36010 | Bearing, needle roller (for 4th gear) | 10.51 | 1 | |
90364-39006 | Bearing, needle roller (for 2nd gear) | 13.97 | 1 | |
90364-39008 | Bearing, needle roller (for 1st gear) | 14.84 | 1 | |
90365-30023 | Bearing (for input shaft front) | 30.54 | 1 | |
90366-28007 | Bearing (for output shaft rear) | 15.70 | 1 | |
90366-32002 | Bearing (for output shaft front) | 19.23 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90520-76003 | Ring, shaft snap (for input shaft rear bearing) | 1.84 | 1 | |
90560-33004 | Spacer (for 5th gear bearing) | Discontinued | 1 | |
90560-36002 | Spacer (for 4th gear bearing) | 1.05 | 1 | |
90560-39003 | Spacer (for 2nd gear bearing) | 1.05 | 1 | |
91611-60616 | Bolt | 1.00 | 3 | |
GEAR, 2ND | ||||
33033-17010 | Gear, 2nd | Discontinued | 1 | |
33332-20100 | Gear, 2nd | Discontinued | 1 | |
GEAR, 1ST | ||||
33032-17010 | Gear, 1st | 130.30 | 1 | |
33335-17020 | Gear, 1st | Discontinued | 1 | |
GEAR, REVERSE | ||||
33331-20050 | Gear, reverse | Discontinued | 1 | |
33331-20060 | Gear, reverse | Discontinued | 1 | |
SHAFT, OUTPUT | ||||
33321-20110 | Shaft, output | 146.92 | 1 | |
33321-32080 | Shaft, output | Discontinued | 1 | |
SHAFT, INPUT | ||||
33311-17020 | Shaft, input | 246.61 | 1 | |
33311-17040 | Shaft, input | Discontinued | 1 | |
HUB, TRANSMISSION CLUTCH, NO.1 | ||||
33361-20040 | Hub, transmission clutch, no.1 | Discontinued | 1 | |
33361-33010 | Hub, transmission clutch, no.1 | 66.46 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.2 | ||||
33364-12020 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
33364-20024 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
KEY, SYNCHROMESH SHIFTING, NO.2 | ||||
33366-12030 | Key, synchromesh shifting, no.2 | 2.62 | 3 | |
33366-20021 | Key, synchromesh shifting, no.2 | Discontinued | 3 | |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | ||||
90564-60001 | Shim (for output shaft rear bearing) | 1.00 | 1 | |
90564-60002 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60003 | Shim (for output shaft rear bearing) | 1.05 | 1 | |
90564-60004 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60005 | Shim (for output shaft rear bearing) | 1.22 | 1 | |
90564-60006 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60007 | Shim (for output shaft rear bearing) | 1.32 | 1 | |
90564-60008 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60009 | Shim (for output shaft rear bearing) | 1.57 | 1 | |
90564-60010 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60011 | Shim (for output shaft rear bearing) | 1.84 | 1 | |
90564-60012 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60013 | Shim (for output shaft rear bearing) | 1.92 | 1 | |
90564-60014 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60015 | Shim (for output shaft rear bearing) | 2.02 | 1 | |
90564-60016 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60017 | Shim (for output shaft rear bearing) | 2.10 | 1 | |
90564-60018 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60019 | Shim (for output shaft rear bearing) | 2.27 | 1 | |
90564-60020 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60021 | Shim (for output shaft rear bearing) | 2.37 | 1 | |
90564-60022 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60023 | Shim (for output shaft rear bearing) | 2.45 | 1 | |
90564-60024 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
90564-60025 | Shim (for output shaft rear bearing) | 2.54 | 1 | |
GEAR, 3RD | ||||
33034-17020 | Gear, 3rd | Discontinued | 1 | |
33034-17021 | Gear, 3rd | Discontinued | 1 | |
33034-17030 | Gear, 3rd | Discontinued | 1 | |
RETAINER, BEARING, REAR(MTM) | ||||
33151-20030 | Retainer, bearing, rear (mtm) | 25.45 | 1 | |
33151-20031 | Retainer, bearing, rear (mtm) | 26.15 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-34003 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34004 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34005 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34006 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34007 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34008 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
90520-34009 | Ring, shaft snap (for clutch hub no.2 setting) | 1.31 | 1 | |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | ||||
90364-28015 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
90364-33004 | Bearing, needle roller (for 5th gear) | Discontinued | 1 | |
HUB, TRANSMISSION CLUTCH, NO.2 | ||||
33362-12030 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33362-20020 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33362-20021 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
GEAR, 4TH | ||||
33035-17020 | Gear, 4th | 132.05 | 1 | |
33035-17021 | Gear, 4th | 132.05 | 1 | |
33035-17030 | Gear, 4th | Discontinued | 1 | |
GEAR, 5TH | ||||
33036-20050 | Gear, 5th | Discontinued | 1 | |
33336-20070 | Gear, 5th | Discontinued | 1 | |
RING, SYNCHRONIZER, NO.2 | ||||
33368-12041 | Ring, synchronizer, no.2 | 30.70 | 1 | |
33368-20030 | Ring, synchronizer, no.2 | Discontinued | 2 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-12010 | Spring, synchromesh shifting key, no.3 | 2.01 | 1 | |
33392-12020 | Spring, synchromesh shifting key, no.3 | 1.00 | 1 | |
33392-20010 | Spring, synchromesh shifting key, no.3 | Discontinued | 1 | |
HUB, TRANSMISSION CLUTCH, NO.3 | ||||
33393-12020 | Hub, transmission clutch, no.3 | 47.22 | 1 | |
33393-20020 | Hub, transmission clutch, no.3 | Discontinued | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-30008 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30009 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30010 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30011 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
90520-30012 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30013 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30021 | Ring, shaft snap (for input shaft rear bearing) | 1.31 | 1 | |
90520-30022 | Ring, shaft snap (for input shaft rear bearing) | 1.49 | 1 | |
SLEEVE, TRANSMISSION HUB, NO.3 | ||||
33395-12020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
33395-20020 | Sleeve, transmission hub, no.3 | 46.04 | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-27037 | Ring, shaft snap | Discontinued | 1 | |
90520-27038 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27039 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27040 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27041 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27042 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27043 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27044 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-27045 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | ||||
33391-20010 | Spring, synchromesh shifting key, no.2 | Discontinued | 2 | |
90501-08131 | Spring, synchromesh shifting key, no.2 | 1.22 | 3 | |
KEY, SYNCHROMESH SHIFTING, NO.1 | ||||
33365-20050 | Key, synchromesh shifting, no.1 | Discontinued | 3 | |
33365-33010 | Key, synchromesh shifting, no.1 | 2.72 | 3 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | ||||
33371-20020 | Spring, synchromesh shifting key, no.1 | Discontinued | 2 | |
33371-33010 | Spring, synchromesh shifting key, no.1 | 1.92 | 2 | |
RING, SYNCHRONIZER, NO.1 | ||||
33367-12040 | Ring, synchronizer, no.1 | 34.02 | 1 | |
33367-20040 | Ring, synchronizer | Discontinued | 1 | |
33367-20050 | Ring, synchronizer | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | ||||
90520-37004 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37005 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37006 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37007 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37008 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37009 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
90520-37010 | Ring, shaft snap (for clutch hub no.1) | 1.32 | 1 | |
SCREW(FOR REAR BEARING RETAINER) | ||||
90149-80015 | Screw (for rear bearing retainer) | Discontinued | 7 | |
90149-80029 | Screw (for rear bearing retainer) | 1.05 | 7 |
Number | Name | Price from, USD | Required |
---|
33032-20050 | Gear, 1st | Discontinued | 1 | |
33033-32020 | Gear, 2nd | Discontinued | 1 | |
33034-32011 | Gear, 3rd | 87.45 | 1 | |
33035-20010 | Gear, 4th | 90.08 | 1 | |
33036-20030 | Gear, 5th | Discontinued | 1 | |
33125-32010 | Receiver, manual transaxle case | 3.50 | 1 | |
33134-32011 | Cover, output shaft (mtm) | 3.76 | 1 | |
33151-32011 | Retainer, bearing, rear (mtm) | 20.20 | 1 | |
33311-17030 | Shaft, input | 250.11 | 1 | |
33348-32010 | Washer, 1st gear thrust | Discontinued | 1 | |
33361-32011 | Hub, transmission clutch, no.1 | 48.97 | 1 | |
33362-32010 | Hub, transmission clutch, no.2 | 45.47 | 1 | |
33364-32011 | Sleeve, transmission hub, no.2 | 48.10 | 1 | |
33365-32010 | Key, synchromesh shifting, no.1 | Discontinued | 3 | |
33366-32010 | Key, synchromesh shifting | Discontinued | 3 | |
33367-32010 | Ring, synchronizer | Discontinued | 2 | |
33368-32010 | Ring, synchronizer, no.1 | Discontinued | 2 | |
33371-20010 | Spring, synchromesh shifting key | 1.08 | 2 | |
33371-32011 | Spring, synchromesh shifting key | Discontinued | 2 | |
33385-32010 | Retainer, shifting key | Discontinued | 1 | |
33393-32010 | Hub, transmission clutch, no.3 | 45.47 | 1 | |
33395-32010 | Sleeve, transmission hub, no.3 | Discontinued | 1 | |
33402-32010 | Gear sub-assy, reverse idler | 65.59 | 1 | |
33422-20010 | Gear, 4th driven | 52.47 | 1 | |
33423-32010 | Gear, 3rd driven | 60.34 | 1 | |
33428-20040 | Gear, 5th driven | Discontinued | 1 | |
33431-32010 | Spacer, output gear | 9.79 | 1 | |
33451-32010 | Shaft, reverse idler gear | 27.37 | 1 | |
90105-08041 | Bolt | Discontinued | 1 | |
90105-08045 | Bolt (for rear bearing retainer) | 2.19 | 5 | |
90179-18003 | Nut (for manual transmission output shaft rear set) | 2.97 | 1 | |
90254-10001 | Pin, slotted spring (for output shaft) | Discontinued | 1 | |
90254-10002 | Pin, slotted spring | Discontinued | 1 | |
90363-25037 | Bearing (for output shaft rear) | 14.84 | 1 | |
90363-29004 | Bearing, radial ball (for input shaft rear) | 17.07 | 1 | |
90364-27005 | Bearing, needle roller (for 5th gear) | 13.83 | 1 | |
90364-32011 | Bearing, needle roller (for 2nd gear) | Discontinued | 1 | |
90364-32013 | Bearing, needle roller (for 4th gear) | Discontinued | 1 | |
90364-33001 | Bearing, needle roller | 20.03 | 1 | |
90364-38004 | Bearing, needle roller (for 1st gear) | Discontinued | 1 | |
90365-30017 | Bearing (for input shaft front) | 21.17 | 1 | |
90365-32012 | Bearing (for output shaft front) | Discontinued | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90521-66004 | Ring, hole snap (for output shaft rear bearing) | Discontinued | 1 | |
90521-76001 | Ring, hole snap (for input shaft rear bearing) | Discontinued | 1 | |
90560-27004 | Spacer (for 5th gear bearing) | Discontinued | 1 | |
90560-32006 | Spacer (for 2nd gear bearing) | Discontinued | 1 | |
90560-32007 | Spacer (for 4th gear bearing) | 2.10 | 1 | |
90560-48002 | Spacer (for output shaft) | 3.32 | 1 | |
91611-60616 | Bolt | 1.00 | 2 | |
91611-60820 | Bolt | 1.08 | - | |
GEAR, REVERSE | ||||
33331-32010 | Gear, reverse | 90.08 | 1 | |
33331-32020 | Gear, reverse | 90.08 | 1 | |
SHAFT, OUTPUT | ||||
33321-32030 | Shaft, output | 145.17 | 1 | |
33321-32060 | Shaft, output | 135.55 | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-30002 | Ring, shaft snap | 1.32 | 1 | |
90520-30003 | Ring, shaft snap | 1.31 | 1 | |
90520-30004 | Ring, shaft snap | 1.32 | 1 | |
90520-30005 | Ring, shaft snap | 1.31 | 1 | |
90520-30006 | Ring, shaft snap | 1.31 | 1 | |
90520-30007 | Ring, shaft snap | 1.31 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-27018 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27019 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27020 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27021 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27022 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-20022 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20023 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20024 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20025 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20026 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20027 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20028 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20029 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20030 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20031 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20032 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20033 | Ring, shaft snap (for transmission clutch hub no.3) | 1.92 | 1 | |
90520-20034 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20035 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20036 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | ||||
90520-29012 | Ring, shaft snap (for clutch hub no.1) | 1.49 | 1 | |
90520-29013 | Ring, shaft snap (for clutch hub no.1) | 1.49 | 1 | |
90520-29014 | Ring, shaft snap (for clutch hub no.1) | 1.49 | 1 | |
90520-29015 | Ring, shaft snap (for clutch hub no.1) | 1.49 | 1 | |
90520-29016 | Ring, shaft snap (for clutch hub no.1) | 1.49 | 1 | |
90520-29017 | Ring, shaft snap (for clutch hub no.1) | 1.49 | 1 | |
PLATE, BEARING LOCK | ||||
33326-32010 | Plate, bearing lock | 1.84 | 1 | |
33326-32020 | Plate, bearing lock | 2.36 | 1 |
Number | Name | Price from, USD | Required |
---|
33032-32030 | Gear, 1st | Discontinued | 1 | |
33034-32032 | Gear, 3rd | Discontinued | 1 | |
33035-32050 | Gear, 4th | 95.32 | 1 | |
33038-33011 | Ring set, synchronizer, no.2 | 50.72 | 1 | |
33125-32011 | Receiver, manual transaxle case | 3.06 | 1 | |
33134-33010 | Cover, output shaft (mtm) | Discontinued | 1 | |
33151-32012 | Retainer, bearing, rear (mtm) | Discontinued | 1 | |
33321-33030 | Shaft, output | 221.25 | 1 | |
33326-32010 | Plate, bearing lock | 1.84 | 1 | |
33331-33021 | Gear, reverse | Discontinued | 1 | |
33332-33021 | Gear, 2nd | Discontinued | 1 | |
33336-33030 | Gear, 5th | Discontinued | 1 | |
33343-33010 | Bush, 2nd gear | Discontinued | 1 | |
33348-32010 | Washer, 1st gear thrust | Discontinued | 1 | |
33361-33020 | Hub, transmission clutch, no.1 | 47.22 | 1 | |
33362-33011 | Hub, transmission clutch, no.2 | Discontinued | 1 | |
33364-32013 | Sleeve, transmission hub, no.2 | Discontinued | 1 | |
33365-33020 | Key, synchromesh shifting, no.1 | 2.45 | 3 | |
33366-32020 | Key, synchromesh shifting, no.2 | Discontinued | 3 | |
33367-33010 | Ring, synchronizer, no.1 | Discontinued | 1 | |
33391-32010 | Spring, synchromesh shifting key, no.2 | Discontinued | 2 | |
33393-33010 | Hub, transmission clutch, no.3 | Discontinued | 1 | |
33395-33010 | Sleeve, transmission hub, no.3 | 89.65 | 1 | |
33396-33012 | Ring, synchronizer pull | 28.78 | 1 | |
33397-33012 | Ring, synchronizer, inner no.5 | Discontinued | 1 | |
33398-12010 | Ring, synchronizer, middle no.5 | 26.59 | 1 | |
33399-33010 | Ring, synchronizer, outer no.5 | 28.78 | 1 | |
33402-33010 | Gear sub-assy, reverse idler | Discontinued | 1 | |
33422-32050 | Gear, 4th driven | Discontinued | 1 | |
33423-32030 | Gear, 3rd driven | Discontinued | 1 | |
33428-32050 | Gear, 5th driven | Discontinued | 1 | |
33431-32020 | Spacer, output gear | 9.09 | 1 | |
33451-32010 | Shaft, reverse idler gear | 27.37 | 1 | |
33462-12010 | Washer, reverse idler thrust | 5.01 | 1 | |
90105-08041 | Bolt | Discontinued | 1 | |
90105-08237 | Bolt (for rear bearing retainer) | Discontinued | 5 | |
90179-18003 | Nut (for manual transmission output shaft rear set) | 2.97 | 1 | |
90360-05012 | Ball | 1.00 | 1 | |
90363-25056 | Bearing | 14.84 | 1 | |
90363-29006 | Bearing, radial ball (for input shaft rear) | 17.07 | 1 | |
90364-27005 | Bearing, needle roller (for 5th gear) | 13.83 | 1 | |
90364-32013 | Bearing, needle roller (for 4th gear) | Discontinued | 1 | |
90364-33001 | Bearing, needle roller | 20.03 | 1 | |
90364-38004 | Bearing, needle roller (for 1st gear) | Discontinued | 1 | |
90364-39013 | Bearing, needle roller (for 2nd gear) | Discontinued | 1 | |
90365-30017 | Bearing (for input shaft front) | 21.17 | 1 | |
90365-32013 | Bearing (for output shaft front) | 22.97 | 1 | |
90430-08010 | Gasket | 1.00 | 1 | |
90501-08141 | Spring | 1.00 | 3 | |
90520-46035 | Ring, snap (for synchronizer pull ring) | 2.01 | 1 | |
90521-66004 | Ring, hole snap (for output shaft rear bearing) | Discontinued | 1 | |
90521-76001 | Ring, hole snap (for input shaft rear bearing) | Discontinued | 1 | |
90560-27004 | Spacer (for 5th gear bearing) | Discontinued | 1 | |
90560-32007 | Spacer (for 4th gear bearing) | 2.10 | 1 | |
91611-60616 | Bolt | 1.00 | 2 | |
91611-60820 | Bolt | 1.08 | - | |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | ||||
90520-30002 | Ring, shaft snap | 1.32 | 1 | |
90520-30003 | Ring, shaft snap | 1.31 | 1 | |
90520-30004 | Ring, shaft snap | 1.32 | 1 | |
90520-30005 | Ring, shaft snap | 1.31 | 1 | |
90520-30006 | Ring, shaft snap | 1.31 | 1 | |
90520-30007 | Ring, shaft snap | 1.31 | 1 | |
RING, SYNCHRONIZER, NO.2 | ||||
33368-17011 | Ring, synchronizer, no.2 | 28.33 | 1 | |
33368-32020 | Ring, synchronizer, no.2 | 25.01 | 1 | |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | ||||
33392-33010 | Spring, synchromesh shifting key, no.3 | Discontinued | 1 | |
33392-33021 | Spring, synchromesh shifting key, no.3 | 1.57 | 1 | |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | ||||
90520-27018 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27019 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27020 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27021 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
90520-27022 | Ring, shaft snap (for input shaft rear bearing) | Discontinued | 1 | |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUB NO.3) | ||||
90520-20034 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20035 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20036 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20051 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20052 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20053 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20054 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20055 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20056 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20057 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20058 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20059 | Ring, shaft snap (for transmission clutch hub no.3) | 1.40 | 1 | |
90520-20060 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 | |
90520-20061 | Ring | 1.40 | 1 | |
90520-20062 | Ring, shaft snap (for transmission clutch hub no.3) | Discontinued | 1 |